How to access a hard drive on Aspire M3201

Similar Questions

• How to access the hard drive USB on E3000? Am I missing something?

  I have my router configuration fine to the internet, as well as the media server.  I can't understand how to access the hard drive of my laptop, however.  The manual says to put 192.168.1.1 in the field the address of windows Explorer, but it gives me just the 'Setup' page for the router.

  Am I missing something simple?  I use Windows XP.

  Click on start - go to start > Run/start search and type "\\192.168.1.1" (without the quotes) and press on enter and it should ask the user name and password, the user name and password, use "admin" all lower case, and then click Ok... Now you should be able to see your USB... You must make a right click on it and select "Map network drive" and check the Enable box and below click Finish... It will map the USB on your computer... Once done, you will be able to send and receive data from your computer to the USB...

• How to access a hard drive belonging to another computer, I have a bunch of hard drives and before you format it to use it again, I would like to see what is their. Thank you maldog

  How to access a hard drive belonging to another computer, I have a bunch of hard drives and before you format it to use it again, I would like to see what is their. Thank you maldog

  The easiest way is to use a USB to SATA or IDE USB adapter. (most of the adapters offer both).

  Here is an example
  http://www.Newegg.com/product/product.aspx?item=N82E16812232002

• Qosmio - how to access the HARD drive?

  Hello
  the Qosmio G30 is completely 'dead' and I removed the two HARD drives.
  Anyone know how I could access the HARD disk without having to start the RAID... How could restore data by using the HARD drive as a USB device?

  Thank you
  Mike

  Hello

  You want to remove the internal HARD drive and want to connect it as external device using an external HARD drive enclosure?

  In this case you will need an external SATA USB controller because the Qosmio G30 supports SATA drives.

• HP Pavilion 17-e049wm E0J75UA: how to access the HARD drive?

  Hello

  I want to spend the HARD drive on my HP Pavilion 17 - e049wm on a hybrid drive. I have the disc and the designs or models, but don't see how to remove the access door release Panel in order to get the HARD drive

  Hello

  Please find the link given below could help you fix your problem, check 48 procedures Chapter 5 removal and replacement of automatic client repair parts.

  Maintenance and Service Guide

• PC laptop Pavilion 15: how to access the hard drive of a PC pavilion 15 laptop

  I can't remove the cover from below even after the removal of all the obvious screws and so I can not replace the hard drive

  Recently had another poster with similar problem. Paris you have same model that he does-is not an easy task to change the hard drive.

  http://h10032.www1.HP.com/CTG/manual/c04409752

• How can I access the hard drive in HP 14 - b120dx?

  Hello

  I am trying to remove the body from the bottom of my HP 14 - b120dx in order to access the hard drive, but can't seem to find a way to do it.  I removed all the screws but I can't find an easy way to open the case.  What should I do?  Thanks in advance!

  Hello

  Page #55 the next document shows you how:

  http://h10032.www1.HP.com/CTG/manual/c03721290.PDF

  You must unplug the small number of things.

  Kind regards.

• How to format my hard drive as my operating system running IM?

  How to format my hard drive as my operating system running IM? I tried many ways must my computer tells me I have to stop all programs that I have running. play help as soon as possible!

  Some PC contains a hidden hard disk restore partition. If yours is one of them, this is how you return your PC to its original state.

  What is the brand and model of your PC?

  Yet, this is a pretty drastic step. There is more easy and faster to improve performance. If you do not want to give it a shot, let us know. And also tell us the specifications of your PC, type of XP, SP, etc.

  Also, you might find follows her beneficial:

  Here are the usual causes of slow:

  1. malware (malware). You need to rule out first! This page has excellent information:

  http://Web.archive.org/Web/20080610163247/http :// www.elephantboycomputers.com/page2.html#Removing_Malware

  2. some programs aimed at combating malware (for example, Norton and McAfee). Ironically, they can slow things down because they use simply much too many resources. Sometimes they cause conflicts with other programs. And their default mode is to scan your entire hard drive whenever you start. Fortunately, there are other programs of anti-malware software available that use much less resources (p. ex., NOD32, Avast and Avira).

  3. too much of certain types of programs still running in background - with or without your consent. (Then again, a lot of programs running in the background of the consequences trivial.)

  To determine each program and process, you are running, use the task (Ctrl + Alt + Delete) Manager and click the processes tab. You should be able to sort by CPU usage or memory usage for a good ideas that are resource/memory hogs. You must write the names of all the processes for future detective work (or take a snapshot and print it).

  Use these sites to determine what these programs are, and learn how configure them to not always run when starting:

  http://www.PACS-portal.co.UK/startup_content.php#THE_PROGRAMS
  http://www.bleepingcomputer.com/startups/
  http://www.AnswersThatWork.com/Tasklist_pages/Tasklist.htm

  Sometimes, it is recommended to use msconfig to configure programs to run at startup. A better, more thorough program is Autoruns:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  But before that, you must use the settings preference of the program in question. Otherwise, for some programs, they will return to the list of startup anyway!

  If you do not want to use msconfig, it can be accessed in this way:

  Start | Run | Type "msconfig" (without the quotes). Enter (or OK)

  4. not enough RAM, causing the PC too rely on the pagefile. A quick way to determine if what is happening is to open (Ctrl + Alt + Delete) Task Manager, and then click the performance tab. Then the three values under Commit Charge (k) Note: in the lower left corner: Total, limit and peak.

  The Total number represents the amount of memory you are using right now. The vertex figure represents the maximum amount of memory you made since the last boot. If these figures are lower than the value of the amount of physical memory (K), then you probably have lots of RAM. In case you want to study it more, you can run the Page queue Monitor for Windows XP:

  http://www.dougknox.com/XP/utils/xp_pagefilemon.htm

  5. you can also verify that the access mode of your hard drive has not changed from DMA to PIO:

  http://www.technize.com/2007/08/02/is-your-hard-disk-CDDVD-drives-too-slow-while-copying/

  and

  http://winhlp.com/node/10

• How to access a different drive?

  How to access a different drive? For example... C drive memory is full, the drive D is empty!  32 concerts to every reader!

  Hello RobertShaffer10,

  You have any hard a very small disk capacity to aid long-term Vista.

  You can combine the two Partitions into a single one using this method:

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

• HP Pavilion dm1-4310nr Notebook - how to remove the hard drive

  I wish to have access to the hard drive and do not want to damage my system. After removing the battery, how do I access the hard drive Bay?

  Thank you very much!

  

• How to replace a hard drive as a whole in a desktop computer

  How to replace a hard drive, installed new disk and bios doewsn can't see it.  other computers see reader and are able to access by car. What give3s with lt32e sony

  What is the model name of your VAIO computer? Please also provide the brand and model of hard drive you have installed.

• How to clear the hard drive on my old iMac of 2008?

  I have a 2008 iMac I want to recycle. How to clear the hard drive?

  (What is PPC?)

  PPC stands for Power PC. Is the name used to refer to the old Macs that uses a Motorola processor instead of Intel chips used today. To clear your old Mac follow the advice in this document from Apple... What to do before you sell or give away your Mac - Apple Support

• Firefox crashes at random. Affected PC together. Something is accessing the hard drive

  Firefox crashes at random. Impossible to move on the screen, select all functions, cancel or enter data

  Affected PC together. Can't do anything on the PC.

  Something is accessing the hard drive. Hare drive the LED flashes quickly it's a running process.

  Shows details of the system;

  Plug-ins installed

  Shockwave Flash 11.2 r202
  Shockwave Flash 19.0 r0

  Shockwave Flash 19 is not compatible with your system.
  Remove all Shockwave flash.

  Flash Player (Linux) Version 11.2.202.540
  
  https://www.Adobe.com/products/flashplayer/distribution3.html

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• Office jet pro 8500 a: elimination of printer, was this encrypted model? How to destroy the hard drive?

  This model encrypted?

  If this is not the case, how to destroy the hard drive? Where is the hard drive?

  Hi @Diane47,

  Thanks for joining the Forums of HP Support with your request to printer.

  I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer you plan to elimination and you wonder if the hard disk is encrypted and how to destroy the hard drive. I would like to help with that.

  HP Officejet Pro 8500 has e-all-in-one printer don't have a hard drive. It contains a very small amout of memory, so it can keep in memory the printer and fax settings.

  You can clear the memory by restyoring the printer back to the default values.

  1. on the printer Panel, select Setup.

  2. from the Configuration menu, select Tools.

  3. on the Tools menu, select Restore Factory Defaults.

  HP offers to recycle their products for you. If you want to know more about it, please click here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!