How to access all the lines one by one, a table ADF via managed bean

Similar Questions

• How to restore all the lines after you have inserted by OracleBulkCopy()

  Hello
  
  I tried to restore an outer transaction and also tried to abort OracleBulkCopy() but it is still inserted all the lines. Someone knows how to do this?
  
  Case 1: Failed. Any line inserted in any case.
  
  OracleConnection connection = new OracleConnection;
  connection. Open();
  OracleTransaction trans = connection. BeginTransaction();
  OracleBulkCopy bulkCopy = new OracleBulkCoopy (connection, OracleBulkCopyOptions.Default);
  bulkCopy.DestinationTableName = "SomeTable";
  
  bulkCopy.WriteToServer (SomeDataTable);
  TRANS. Rollback();
  
  Case 2: Use OracleRowsCopiedEventHandler delegate and in the reminder set Oracle.RowsCopiedEventsArgs.Abort to true and then restore on the transaction in the catch block. Does not work either.
  
  Thank you.
  Hoang

  OK, I got the answer of the Oracle. Transaction is not currently supported with OracleBulkCopy().

• I still have not found "help" to tell me how to remove all the lines and columns beyond those needed for my spreadsheet.

  I used several worksheets.  More allows me to specify the rows/columns and then delete them.  This is to remove all the lines/columns beyond those set up and formatted for my spreadsheet.   I tried many ways to remove all additional lines/columns, but without success.  I even took the time to scroll down/on to highlight all the unnecessary lines and columns, but they do not remove it.
  Any suggestions?  I used spreadsheets most allow me to specify the number of rows/columns for my worksheet

  You can ask your question in the office | Excel Forum because it is not really a problem of Windows XP performance and maintenance.

  Office | Excel

  http://answers.Microsoft.com/en-us/Office/Forum/Excel

  Also, providing specific information may help to get a faster response or better, such as the version of Office or Excel? version of Windows XP? Home, Pro, 32-bit or 64-bit.

  I hope this helps.

• How to display all the lines to PRint html option in obiee 11g

  Hello
  
  I am facing a problem in obiee 11g (windows server 2003). I have 2 environments (SIT & dev)
  In dev I'm not confronted with no problem but in SIT when I print the report in html format only lines 1 to 25 are displayed.
  What should I do to display all the lines
  
  Thanks in advance
  Abdul

  Hello

  By default it will like that alone. You must enable PDF/print properties in your analysis
  Just go to edit analysis - result table edit table/pivot table see and
  -Click on properties of PDF print control - select display as "all lines".

  Then save it and run it.

  Thank you

  Deva

• Satellite A200-23Z - HARD drive as external drive USB - how to access all the files?

  Hello!

  After losing the motherboard of my Satellite A200-23Z I need save some important files to hdd satellite. With external USB enclosure, I can only access some... Can't see program files, filesystem - really nothing disk system, a large number of files was on the desk...

  How to get full access to all the hard drive? -to all logical drives?

  Please - help... :(
  Ivars

  I put t understand what is happening here. I have old P200 (similar to yours but with 17 inch screen) and when I connect the HARD drive as external HARD drive to my new P500 I have full access to all stored data.
  There is no limitation at all.

  > was a lot of files on the desktop...
  Do you know how to find the right location for desktop?

• JavaScript - how to refer to the line/field directly above a table

  I have a tabular presentation this tab of people through data entry fields
  
  some of the data is inserted before when the page is loaded
  
  However when they tab for a certain area I would like only to copy the data from the same field in the line above
  
  at the point where they (OnBlur) tab out of the field, I copy the contents of a Page element, and then I tried to copy it in when the field gets focus
  but he doesn't seem to like an OnFocus and OnBlur an in the same field? is this correct?
  
  So if I could reference the field above I could copy it directly, I've used the reference nextsibling for the fields in the same line, I was wondering if there was something different
  
  Thank you very much
  
  Chris

  Hi Chris,

  The onfocus and onblur should work ok on the same ground. You will be perhaps easier to use the attribute 'name' instead. This allows you to refer to the collection of fields of the same name, working would out which one is the current field and then look at that before that. I've done here, in the SAL column: [http://apex.oracle.com/pls/otn/f?p=55989:3]

  In region Header region, I have:

  <script type="text/javascript">
  function copyPrevious(o)
  {
   var x;
   var v;
   v = "";
   var f;
   f = 0;
   if (o.value == "")
   {
    var oName = o.name;
    var oID = o.id;
    var items = document.getElementsByName(oName);
    if (items)
    {
     for (x = 0; x < items.length; x++)
     {
      if (items[x].id == oID)
      {
       if (x > 0)
       {
        f = x - 1;
        break;
       }
      }
     }
    }
    if (f > 0)
    {
     o.value = items[f].value;
    }
   }
  }
  </script>
  

  and as attributes of the element of the SAL column, I have:

  onfocus="javascript:copyPrevious(this);"
  

  Andy

• How to access all the files in a directory.

  I want to get the path for all files exist in a directory.

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:439619916584

• How to access all the properties of a generic object

  I am trying to create a simple Tester utility to allow editing the attributes of UI during execution, and I want to get a list of all an attributes of objects and display them in a tree.

  Many examples are found with a google search, but I don't understand why the 1st example below does not work (no properties are identified by the loop for), and the second example works as expected (the object tree has been chosen arbitrarily, and cleary has many attributes).

  Example 1: Typed objects do not seem to work, any output of this code.

  var testTree:Tree = new Tree();
  for (var o: * in testTree) {}
  trace (o + "=" + testTree [o]);
  }

  Example 2: This works as expected

  
  var dynamicObj:Object = {param1: 'test1', param2: 'test2'};
  for (var x: * in dynamicObj) {}
  trace (x + "=" + dynamicObj [x]);
  }

  ".." means XMLList of all nodes with name accessor

  the same effect could be achieved by using this syntax describeType (imgPhoto) .descendants ("accessor");

  to learn more about the documentation of XML type:

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=13_Working_with_XML_01.html

  If you think this message responds to your question or assistance, please mark respectively

• My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files. How do I take the old bookmarks if there is no backup?

  My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?

  In fact, it can be easier...

  If you have the old drive connected as, say, drive E, go to:

  E:\Users\username
  

  Then click in the address bar and paste it after this and press ENTER to open it:

  \AppData\Roaming\Mozilla\Firefox\Profiles
  

  Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.

  If you find multiple profile folders, look inside to find the most recently updated backups.

  To restore the backup files, see: restore bookmarks from a backup or move them to another computer

• I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  Hi PJG_918,
   
  To resolve this problem, you must turn off Simple file sharing and then take over the folder.
   
  Here is an article that will explain the procedure to the same thing:
   
  "Access denied" error message when you try to open a folder

• How to filter data according to internal application and in case if returns nothing outside the query must return all the lines

  create table ab (a number, b varchar2 (20));

  Insert into ab

  Select rownum, rownum. "" sample "

  of the double

  connect by level < = 10

  create table bc (a number, b varchar2 (20));

  Insert into BC.

  Select rownum + 1, rownum + 1 | "" sample "

  of the double

  connect by level < = 10

  Select * AB

  where b in (select b BC where b = "2sample")

  This query will return me 1 row, but there are cases where the value of the parameter b is null

  and that it should return all rows in the table

  as

  Select * AB

  where b in (select b BC where b = "2sample")

  which return specific values, but I want to change in a way when the inner query returns nothing then outer query should return all the lines and works as

  Select * AB;

  Is it possible to put in a single query

  Hello

  You seem to ask for different things.  You want all the lines AB when

  1. The parameter ("2sample' in the example) is NULL, or when
  2. There is no corresponding row in the 2 tables (which could happen even if the parameter is not NULL)

  ?

  Assuming you want the option 2, here's one way:

  WITH got_rnk AS

  (

  SELECT ab.*

  DENSE_RANK () (ORDER IN CASE

  WHEN b (IN)

  SELECT b

  BC.

  WHERE b = "2sample" - parameter

  )

  THEN "A".

  OF ANOTHER 'B '.

  END

  ) AS rnk

  AB

  )

  SELECT a, b

  OF got_rnk

  WHERE rnk = 1

  ;

  This does not assume b is unique in each table.

  Thanks for posting the CREATE TABLE and INSERT statements; It is very useful.

• How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  Hello Jmbtexas4,

  By default, you will need to individually click on the fields of the form and check the 'read only' and save it. From now on, it is not possible to select all together and make the changes.

  -Usman

• How to print all the files in a folder without having to open each one?

  Hello

  Can someone tell me how to print all the files in a folder? I often need to print multiple files in a folder and it would allow me to save a lot of time!

  Thank you!

  I've done some testing, and it seems that Windows 7 allows print several files when they are all the same type of file.  So, for example, you can select and print 15 Word documents, but not a Word document and a single PDF document.

  To work around this limitation, you can print each file type separately.  For example, to print PDF files in a folder:

  1. Type *. PDF in the search for top-right box.
  2. For 1-15 files, press on CTRL + A to select all the.
  3. For 16 or more files, select 15 of them (click on the first, SHIFT + click the last).
  4. Click any file, and then click print .
  5. Repeat steps 3 and 4 as needed.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Why can't access all the options on the options screen

  Using Firefox 40.0.2 and find that when I try to access the options screen, it shows, but I can't access all the options it contains, including passwords. This has only just begun, so this would indicate a problem with this version. How can I or yoy, solve this problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Firefox is unable to access all the pages of an HTTPS site.

  We have a computer cannot access all the pages on a specific HTTPS site. I don't want to advertise the URL here. "" We can connect to the site and navagate to half pages, but the other half give ' (error code: sec_error_unknown_issuer). We have uninstalled FF and spilled the appdata. Renamed the cert db and he had to recreate. IE working on it from that computer to the website. All computers in the office can access the web site without any problems, some using ESR some with regular FF. This system uses the latest version of FF ESR, but we also tried the regular version. The only thing we haven't tried is disable the AV (Symantic). One thing I noticed, is that the URL of this web site are extremely long.

  Why the FF honors cert for some pages but not others. It also does us not add an exception.

  Thank you

   Mesept
  

  The first thing I checked was the cert chain, all certificates are valid. Time on computers is very good, the second thing I checked.

  As I said in a previous post, a few pages work, some do not which means that certificates are valid for certain pages, may not be a problem of cert, sometimes they work. Same site also works with IE and chrome on the same systems.

  Cannot ignore and accept the cert in he won't let me. Which is off and I don't know how to turn it on.

  In any case, I submitted a ticket for the owners of the website last week and now everything works.

  Thanks for the answers that I don't have a resolution, I guess that developers found a bug and fixed it.