How to adjust each layer frames so late to the selected position

Similar Questions

• How to remove each layer except the selected layer?

  Hello

  I would like to delete all layers including the background sets and layer except for the selected layer.

  It seems easy to first, but it stops... I tried in several ways; What I am doing wrong?

  #target photoshop
  cTID = function(s) { return app.charIDToTypeID(s); };
  sTID = function(s) { return app.stringIDToTypeID(s); };
  
  app.bringToFront();
  var doc = app.activeDocument;
  var currentLayer = doc.activeLayer; // remember the selected layer
  var selectedlayername = currentLayer.name;
  currentLayer.move( activeDocument, ElementPlacement.PLACEATBEGINNING );  
  
    function DeleteLayer(layername) {  var desc1 = new ActionDescriptor();
      var ref1 = new ActionReference();   ref1.putName(cTID('Lyr '), layername);
      desc1.putReference(cTID('null'), ref1);     var list1 = new ActionList();
      list1.putInteger(17);  desc1.putList(cTID('LyrI'), list1);  executeAction(cTID('Dlt '), desc1, DialogModes.NO);
    };
  
  function DeleteBackground() { var desc1 = new ActionDescriptor();  var ref1 = new ActionReference();   ref1.putProperty(cTID('Lyr '), cTID('Bckg')); desc1.putReference(cTID('null'), ref1);     var list1 = new ActionList();     list1.putInteger(1);   desc1.putList(cTID('LyrI'), list1);    executeAction(cTID('Dlt '), desc1, DialogModes.NO); };
  
  function initial () {
  for(var i = 0 ; i < doc.layers.length;i++){    if (doc.layers[i].isBackgroundLayer == true ) {  DeleteBackground();} }
  var layerNum = doc.layers.length;
  for(var  s = 1 ; s <= layerNum;s++){
     if ( doc.layers[s].name != selectedlayername ) {   
         DeleteLayer (doc.layers[s].name);
         }
     else if ( doc.layers[s].name == selectedlayername ) {
         }
     }
  }
  
  initial();
  

  Thank you

  Best regards.

  Hi arteangelus,

  Try this Code...

  #target photoshop
  var docRef = app.activeDocument;
  var layName = docRef.activeLayer.name
  var l = Number(docRef.layers.length)+1;
  while(--l){
      if(docRef.layers[l-1].name!=layName && docRef.layers[l-1].name!="Background"){
          docRef.layers[l-1].remove();
      }
  else{continue;}
  }
  

  -yajiv

• How to create a drop down that list after the selection of an item on the list, an action is performed (for example, open a document)

  I have already created a drop to downgrade

  

  But can't seem to select each and create a separate 'action' for each name... i. e open file 1 if name 1 is selected in the drop down... There must be something right forward, Miss me here!

  

  You must use a script than the custom validation script. It should look like this:

  If (event.value == "name 1")

  app.openDoc("/c/temp/1.pdf");

  If (event.value == "name 2")

  app.openDoc("/c/temp/2.pdf");

  If (event.value == "name 3")

  app.openDoc("/c/temp/3.pdf");

  If (event.value == "name 4")

  app.openDoc("/c/temp/4.pdf");

  Make sure that check the option to validate the selected value immediately (under Properties - Options) for the script launched as soon as the item is selected.

• How to cut a textframe and place it in the specific position in an another textframe?

  I need to export to RTF. So I have to select the content of the textframe.

  As you can see below,

  first of all, I have to replace all the master page objects (like the task bar and the page number).

  Second, then cut the two objects and paste them into the bodytext and set the anchor and position.

  I have so many files to do from time to time.

  

  So I write the code below (indesign cs 3 javescript, just trying to make a simple example):

  var = app.documents jobbar [0] .pages [0] .textframe [0]

  var pagnum = app.documents [0] .pages [0] .textframe [2]

  var bodtex = app.documents [0] .pages [0] .textframe [1]

  App.Cut (App.Select (jobbar))

  bodtex.insertionPoints [0] .silence = app.paste)

  App.Cut (App.Select (pagnum))

  bodtex.insertionPoints [0] .silence = app.paste)

  bodtex.textFrames [0].anchoredObjectSettings.anchoredPosition = AnchorPosition.ANCHORED

  bodtex.textFrames [1].anchoredObjectSettings.anchoredPosition = AnchorPosition.ANCHORED

  .....

  It does not work.

  I want to like this. The main problem is that I don't know how to put an object into the position of a textframe specfic.

  

  Thanks in advance.

  Ah, you want to create an anchored object (or an inserted object).

  Refer to the instructions on the CS5 Scripting Guide p.89.

  You will need to create a new image with bodtex.insertionPoints [0].textFrames.add () and then manipulate the properties. You may or may not have some success with the .properties property.

  I can't see why you want to use the selection. It's always bad, but it can be easier.

  app.select(jobbar);
  app.cut();
  app.select(bodtex.insertionPoints[0]);
  app.paste();
  

  But good scripts do not change the selection. Which should be reserved for interactive works.

• Problem of effect time adjusted each layer

  Hello

  I made an adjustment layer above two footages. Everything is working (colors, levels, etc.) with that except for the effects of the weather. When I drag twixtor him the video turns red. The original image:

  

  The twixtored one:

  

  And when I use time warp effect in this case:

  

  The lower side has crapped out and even my black and white color has been removed. It's because of the size or fps or what else?

  (720 p footages, 50 frames per second, I changed the size of the model, the version is CS6 AE 11.0.0.378)

  You cannot use Twixtor on an adjustment layer; adjustment layers is not frame rates.  You apply it to a real video layer.

• Newbie question - how to effectively check if photo is part of the selection

  Hi all

  Sorry for the newbie question, but I do not know how to solve, and I'm sure that there is a quick and easy answer to this:

  My goal is to get all the 'stack heads' (photos with Position 1 in batteries) selection ('photos' below).

  for I have, make photo in ipairs( photos )
  local date = picture:getFormattedMetadata("Filename")

  if Photo:getRawMetadata( "isInStackInFolder" ), then
  - Photo is in a stack
  local photoHeadOfStack = picture:getRawMetadata("topOfStackInFolderContainingPhoto")

  local stackPos = picture:getRawMetadata( "stackPositionInFolder" ), - get the position in the stack
  local photoHeadName = photoHeadOfStack:getFormattedMetadata("Filename")

  app:logVerbose(' Photo nb ^ 1, name ^ 2 is in a stack with the position ^ 3 ', i, date, stackPos"")

  if stackPos == 1 then
  - photo is the master of the battery
  stackTop[#stackTop+1] =photo
  app:logVerbose(' picture ^ 1 is the top of the stack ^ 2 ', date, #stackTop)

  -check if couple if it is correct
  elseif photos. photoHeadOfStack then
  app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") (Top of the stack already selected", date)

  other
  stackTop[#stackTop+1] =photoHeadOfStack
  app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") Top of the stack ^ 2 - ^ 3 ", date, #stackTop, photoHeadName)

  end
  end
  end

  
  

  In the if structure in the center of the Position in the stack control, if the Position is not 1, I would check if the photo to the stack ("photoHeadOfStack'") is part of the 'pictures '. I tried 'elseif photos.photoHeadOfStack then' and ' elseif photos [photoHeadOfStack] then ' but it doesn't work-> This elseif is never true even if 'photoHeadOfStack' part of the 'photos'.

  Any way to have this check done without checking the photos "manually"? (via e.g. a loop for)

  I'm sure that Lua offers this, but I do not know how...

  
  

  Thank you for your support!

      --[[ This code creates "stackTops", an array of LrPhotos that are the
      tops of all the stacks containing photos in the array
      "photos". ]]
  stackTopSet = {}
  for _, photo in ipairs (photos) do
      local stackTop = photo:getRawMetadata ("topOfStackInFolderContainingPhoto")
      if stackTop ~= nil then stackTopSet [stackTop] = true end
      end
  stackTops = {}
  for photo, _ in pairs (stackTopSet) do table.insert (stackTops, photo) end
  

• How can I remove an xp installation failed and the selection menu at startup? (The two menu items offer XP but one is incomplete)

  Somehow managed to smeg but now a fresh install of xp and tried again successfully must select one of the two at the start.

  Y at - it an easy way to fix cela or do I have to go in the way of reformatting/reinstall?

  Thanks for any help you can provide.

  Please see: remove invalid boot.ini entries

• How to fill out a drop-down list on the selection of items in another drop-down list using adf 12.1.3

  Hello

  I have a page that has the load drop-down lists and a "submit" button. The first drop down menu got filled using query based VO (IE read only VO) for LOV. The requirement is as below

  -on the selection of an element any in the first drop-down list, the user must fill the second dropdown.

  -Once the second dropdown is completed, the user can select element in the second drop-down list.

  -capture the second drop down menu items value selected in the method of action of the click on the submit button.

  Any help in this scenario will be useful.

  ---

  Rabindranath

  Sameh salvation,

  Thanks for the reply. Your code

  1. DCIteratorBinding iter is BindingContext.getCurrent () .getCurrentBindingsEntry () .get ("iteratorNameInPageDef") (DCIteratorBinding);.
  2. Object secondDropdownValue = iter.getCurrentRow () .getAttribute ("AttributeName");  has been really helpful to get the selected value.

  Thank you very much.

  ---

  Rabindranath

• How layer comps are linked to the layers in the PSD file?

  I am developing an application of external command line c ++ to analyze a PSD file (using the PSD specification - http://www.adobe.com/devnet-apps/photoshop/fileformatashtml/PhotoshopFileFormats.htm#50577 409_17115) in order to extract important information. One of the main things I need is information linking layers to the layers themselves. Digging through the section Image resource specifying "Layers - 1065" I'm only able to extract the name, comments, etc. on the comp. layer is the question I have: how the layers are referenced by the layers in the PSD file? I need to know what layers are applied to each layer comp. Looking through the scripts provided with the PS (for example layers in files), the composition of layers is always "applied" before watching to see what are the layers inside this model. It seems to be the creation of an Action and the implementation of this action with the class identifier of the layer comp before watching his diapers, so this method should know on which layers are referred to by this layer comp. Specifically, what do I need to be able to do and, so far, have failed.

  It is important that I stick with c ++ & that it be an external application, so the Plugin SDK is not much help here.

  I would really appreciate any ideas/suggestions on this subject.

  Thank you all.

  If someone falls on this issue once again, last night, I found the data using a control of the layer comp binary ID I have model layer section. The composition of layers--> data layer is inside a section of "undocumented"data under the tag Layer Records: shmd

  Hope this helps someone.

  TREV-

• How to execute each block in a canvas close while that select the tab?

  Hi all
  
  How to execute each block in a close canvas by selecting a tab? I mean when I select a specific tab in a canvas tab that records should run. How can I configure this?
  
  
  
  Arif

  Arif,

  Make sure that the correct block name is used in the GO_BLOCK statement. As directed by your post, you try to navigate to USERDELETION block when the tab page is USER_CREATION_LIST. Modify the code to

     IF GET_CANVAS_PROPERTY('CAN_SUPERVISOR', TOPMOST_TAB_PAGE) = 'USER_CREATION_LIST' THEN
        go_block('USERCREATION');
        execute_query;
     ELSIF GET_CANVAS_PROPERTY('CAN_SUPERVISOR', TOPMOST_TAB_PAGE) = 'USER_DELETION_LIST' THEN
        go_block('USERDELETION');
        execute_query;
     END IF;
  

  Kind regards

  Manu.

• Auto crop each layer before export layers to files

  The integrated script "export layers to files" isn't crop jpeg exported to the size of the image on each layer.  Instead, it maintains the initial size of the photoshop file and puts the white around the image of the layer.  Y at - it a script that will trim the size of the layer before export for each layer?

  I modified the original Adobe export of layers to Files.jsx to support the layers of trimming with transparency when exporting to JPEG.

  Because of its size, you can find the script changed to http://ps-scripts.com/bb/viewtopic.php?f=10&t=3971

• When I had family a layer to a corner of the puppet, the layer will move to an unexpected position

  Hello.

  I'm hosting a long-necked bird with the puppet tool and that neck I want to fix a head which is a separate layer.

  To do this, I have pickwhip head Position property of the layer to one of the neck of the puppet pin Position property. I made sure that a layer anchor head is in the same position as the puppet pin position.

  However, when I do this, the head layer jump left some 200 pixels.

  How to change the expression so that this layer head remains in the same situation?

  Adding a printscreen for viewing. Layer of head point of anchorage and puppet pin positions are where the leaders meet

  

  This will never work. The effect coordinates are relative to the layer, not the computer. As a minor, you can use the .tocomp (layer 9 space transform convertthe coordinated, otherwise you have to dial before your stuff.

  Mylenium

• The selection layer handles are not visible

  When you create a layer in DW 8 via the Insert > objects Layer > layer or by clicking on the layer to draw on the tab page layout in the menu Insert, the default layer to the width of the window of my design. When I click on a layer I can't access the selection handles.
  
  Issues related to the:
  1. How can I size a layer to my taste instead of always taking the width of my screen?
  2. What can I do if I see eight selection handles when I click on a layer?
  
  Thanks for the research.
  

  Bingo. I thank you for your time and expertise.

• How to adjust the text layer

  Hello

  I have a pretty simple question on layer adjustments. I have a block of text and a picture, but what I want is for the text remains in front of the image and not behind it. How to set the text frame layer that is at the forefront and not hidden by graphics?

  Thank you.

  Rylenol

  You have in fact two layers, or are the two objects on the same layer? If you have two layers, open the Panel layers, and then drag the layer with the text is above the layer with the image.

  If you now have a single layer, create a second layer in the layers panel, and then select the text. You will see a little point to the right of the name of the layer that represents what is selected - which dot drag the new layer and it will move the selction to the new layer.

  Or you can change the order of stacking in a single layer. When you add new items each new object becomes the top of the stack. You can change this setting by selecting any item and in the menu object, choose layout > and one of the optins to move the object upward or down one position at a time or all the way at the top or bottom of the stack.

  Peter

• How can I tell Multisim 10 drizzle can be on each layer in Ultiboard 10

  How can I tell Multisim 10 drizzle can be on each layer in Ultiboard (multi-layer Board) 10.

  Thank you