How to align managers Ref in head

Similar Questions

• How to align the c4100 series ink cartridge

  I have problems hologram out, so far I did 8 pages of alignment, and they look the same all OK for me, now I'm trying to align the cartridges.  My laptop uses windows 8.1.  How to align the cartridges.

  Thanks in advance.

  Hi @lyjonne

  You can install the full software features and use the Printer Wizard to align the cartridges, or you can use the printing and scanning doctor.

  Use this link to download and run the HP printer install wizard for Windows

  The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.

  Or click here to download and run the printing and scanning doctor > www.hp.com/go/tools

  

  

  As you can see the Print and Scan Doctor allows you to print a page, to perform the alignment, to clean the print heads, get print diagnostic information and more.

  I hope this helps.

  -In support of Movember

• How to center the entire page; header, footer and body?

  This could be something basic, but I can't understand how do. I have a header that is a flash of 1100px wide band. And it seems strange, if the window is larger than the width. So the solution, I think that is to have the page whole centerd, that will give him regular spacing on both sides, regardless of the resolution it is viewed on.   help please, thank you.

  Hello

  You must select the content in foooter the header and the body independently and focus then among the paragraph alignment options in the toolbar. Hope this will help

  Thank you

• How can I get the read head to return to the location, it's immediately before starting playback. This used to be a preference but I don't find it in the latest version of logic.

  How can I get the read head to return to the location, it's immediately before starting playback. This used to be a preference but I don't find it in the latest version of logic. What I want to do is; Once playback is stopped the playhead returns to the previous starting position. Where is the setting for this? Is it still an option that I can find nothing in the online help.

  Hi there, don't you mean this one?

  

  Good day!

• How to align the Hcenter fields in VFM?

  How to align the Hcenter fields in VFM? its giving problem

  solution on mine! years of posting for reference...

  what I did earlier.

  I wanted to have a manager of fixed size (maximum size) and put fields here, during an aliging then using stylebit it did not work. I used sublayout and fixed to what extent a perticular dimension

  resovled doing problem.

  It is not sufficient (or necessary) to if you want to use sublayout to have a fixed size, if you use the alignment, bcz setting hardcodedly properties, the other model overridden, so u must override the methods 'getPrefferedWidth & height', not the two held all the time, but according to the needs, if you want to:-alignment, you can try only method "width" and comparable to V-alignment. I included these methods and found that half of my UI related issues would have resolved more easily, if I tried this previously.

  Thank you best regards &.

• How to align form fields in 4.2.6

  Hello

  I use apex 4.2.6.  Wanted to know how to align the fields according to my condition.  For example, 3 fields through and again a few 4 fields in the row.  I use 'Checkerboard'-> 'New Start line' attributes.  But this seems a little dirty.  Is there another way?

  I created an example on oracle for the EMP table.  If someone can clarify.

  (workspace: test_ws_anand user: anandgp password: cable123)

  

  Thank you

  -Anand

  anand_gp wrote:

  I use apex 4.2.6.  Wanted to know how to align the fields according to my condition.  For example, 3 fields through and again a few 4 fields in the row.  I use 'Checkerboard'-> 'New Start line' attributes.  But this seems a little dirty.  Is there another way?

  I created an example on oracle for the EMP table.  If someone can clarify.

  (workspace: test_ws_anand user: anandgp password: cable123)

  

  Your layout grid settings were:

  Sequence	Name of the element	New line	New field
  10	P4_EMPNO	Yes	Yes
  20	P4_ENAME	NO.	NO.
  30	P4_JOB	NO.	NO.
  40	P4_MGR	NO.	NO.
  50	P4_HIREDATE	Yes	Yes
  60	P4_SAL	NO.	NO.
  70	P4_COMM	NO.	NO.
  80	P4_DEPTNO	NO.	NO.

  This means that all elements on each line were placed in the same cell in the grid as the first:

  

  I created a copy of the application and changed the settings of the grid so that each element is in a cell of the grid:

  Sequence	Name of the element	New line	New field
  10	P4_EMPNO	Yes	Yes
  20	P4_ENAME	NO.	Yes
  30	P4_JOB	NO.	Yes
  40	P4_MGR	NO.	Yes
  50	P4_HIREDATE	Yes	Yes
  60	P4_SAL	NO.	Yes
  70	P4_COMM	NO.	Yes
  80	P4_DEPTNO	NO.	Yes

  What gives the layout desired by 3 points in the first row and 4 in the second:

  

  You should consult the documentation on how question attributes affect layout. Note that the best way to control the layout is to change the properties of the layout of all the elements at the same time using the change all button on the page view component. The option Show Grid in the developer toolbar is also useful in showing the layout of the items in the grid.

• How to align the edges of the images

  I have an image that resembles a parallelogram because when the inage has been taken there does not match the grid. How to align the edges?

  Appreciate the help.

  Different ways to do it... but without seeing an image of what you are doing then I would suggest that.

  First SNAP TO GRID.

  View > Snap To > grid

  Then

  Edit > Transform > distort

  This will allow you to move the corners and stretch the image.

  But if you share a screenshot or image we can help you in more detail.

• How to align two forms?

  How to align 2 shape not the stroke in Illustrator CC?

  roxis,

  You can check use limits Preview in Edit > Preferences > General and uncheck it afterwards.

• How to align the text to the right in the text filed using Adobe Acrobat Pro?

  How to align the text to the right in the text filed using Adobe Acrobat Pro? I am able to align the text box, but not the alignment of the text with the deposited text.

  In the Options tab of the field properties dialog box, you can choose left, Center, or right alignment.

• How to align the dialog box in the center of a popup programmatically

  Hey,.

  I use jdeveloper 11g release 2.

  Can someone help on how to align the dialog box programmatically a popup?

  Kind regards

  Steve

  Hello

  As far as I know, if we do not have indications of the dialog then displays on the center of the screen by default.

  This will solve your problem?

  Gud luck!

  HA

• How to align a SWF in the middle in Dreamweaver.

  How to align a SWF in Dreamweaver, so my swf file is located in the heart of the web browser. As for now my swf file is too far to the left in the web browser, even when I put in "Middle" in properties etc. is not to make changes and rest to the left of the web browser.

  Change the width of

  100% to 1214px and add margin: auto to the css...

  #flashContent {width: 100%; height: 100% ;}}

  TO

  #flashContent { width: 1214px; height: 100%;} { margin: auto;}

• How to align photos in a slide show?

  Hello

  I tried to figure out how to align photos in a slide show so that they don't 'jump around' on the page, when they have different formats. Unfortunately I just read this discussion and learned that it is not possible.

  http://forums.Adobe.com/message/6071838
  But Iguiva then writes: «now, I only can do manually, one by one...» »

  
  If I can't control exactly where the picture is displayed, I don't see that I can use the Muse.
  So here's my question: How can I do it manually?

  
  Thank you
  Tine

  Hi Tine,.

  You can go up to the level of the hero Image in the slide show, and then double-click the Image of heroes.

  Which would give access to the actual Image (you will see the left corner of the strip control bed 'Image' rather than 'Hero Image').

  Once at this level, you can handle and place your image in the container Image of hero as you wish and it will keep the position you set.

  Hope that helps.

  See you soon,.

  Vikas

• How to align the position of a node in a pane of the grid using CSS?

  Hello
  
  I have an interface defined in FXML:

  <?xml version="1.0" encoding="UTF-8"?>
  
  <?import java.lang.*?>
  <?import javafx.scene.*?>
  <?import javafx.scene.control.*?>
  <?import javafx.scene.layout.*?>
  
  <BorderPane xmlns:fx="http://javafx.com/fxml" >
      <center>
          <GridPane alignment="top_center" hgap="8" prefWidth="450" vgap="8" style="-fx-padding: 10;" >
              <styleClass>
                  <String fx:value="form"/>
              </styleClass> 
                      
              <children>
  
                  <Label text="From" GridPane.columnIndex="0" GridPane.rowIndex="0" />
                  <TextField fx:id="from" GridPane.columnIndex="1" GridPane.rowIndex="0"/>
  
                  <Label text="Recipient(s)" GridPane.columnIndex="0" GridPane.rowIndex="1" />
                  <TextField fx:id="recipients" GridPane.columnIndex="1" GridPane.rowIndex="1"/>
                  
                  <Label text="Subject (defaults to title)" GridPane.columnIndex="0" GridPane.rowIndex="2" />
                  <TextField fx:id="subject" GridPane.columnIndex="1" GridPane.rowIndex="2"/>                   
                  
                  <Label text="Send mail as ..." GridPane.columnIndex="0" GridPane.rowIndex="3" />
                  <ListView fx:id="mail_format" prefHeight="100" GridPane.columnIndex="1" GridPane.rowIndex="3" />  
                  
                  <Label text="Plain Text Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="4" />                  
                  
                  <Label text="Template" GridPane.columnIndex="0" GridPane.rowIndex="5" />
                  <TextField fx:id="plain_template" GridPane.columnIndex="1" GridPane.rowIndex="5"/>                
                                    
                  <Label text="Send as is (do not dump into plain text)" GridPane.columnIndex="0" GridPane.rowIndex="6" />
                  <CheckBox fx:id="plain_noconvert" GridPane.columnIndex="1" GridPane.rowIndex="6"/>
                  
                  <Label text="HTML Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="7" />
                                  
                  <Label text="Template" GridPane.columnIndex="0" GridPane.rowIndex="8" />
                  <TextField fx:id="html_template" GridPane.columnIndex="1" GridPane.rowIndex="8"/>               
  
                  <Label text="Other configuration" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="center" GridPane.rowIndex="9" />
                  
                  <Label text="Reply-To" GridPane.columnIndex="0" GridPane.rowIndex="10" />
                  <TextField fx:id="reply_tos" GridPane.columnIndex="1" GridPane.rowIndex="10"/>
                  
                  <Label text="Cc" GridPane.columnIndex="0" GridPane.rowIndex="11" />
                  <TextField fx:id="ccs" GridPane.columnIndex="1" GridPane.rowIndex="11"/>
                  
                  <Label text="Bcc" GridPane.columnIndex="0" GridPane.rowIndex="12" />
                  <TextField fx:id="bccs" GridPane.columnIndex="1" GridPane.rowIndex="12"/>
                  
                  <Label text="HTML base (defaults to current server)" GridPane.columnIndex="0" GridPane.rowIndex="13" />
                  <TextField fx:id="html_base" GridPane.columnIndex="1" GridPane.rowIndex="13"/>
                                                                                                                 
                  
              </children>
          </GridPane>
      </center>
  </BorderPane>

  I want to align the labels to right using CSS:

  .form *.label {
    -fx-alignment: right;
    -fx-font-weight: bold;
    -fx-hpos: right;
    -fx-text-alignment: right;
    -fx-text-wrap: true;
  }

  However I have not found any way to align the labels in the GridPane using CSS, or - fx-alignment: right, - fx-node-hpos: right. -fx-hpos: right. -fx-text-alignment: seem to work well...
  
  
  The only way to make it work is to define the attribute of each label Grid.halignment:

                  <Label text="HTML Mail" GridPane.columnIndex="0" GridPane.columnSpan="2" GridPane.halignment="right" GridPane.rowIndex="7" />

  But what happens if I want to change that at a later stage-> I need to change this attribute for each node.
  
  
  How can align the labels to right using CSS only?

  Currently CSS in JFX cannot really be used for layout page (or calibration). This is one of those grey areas between what is style (which should be in the CSS) and what is layout (which should be in the FXML). I think I remember Richard mentioning once in a forum or an article that he did not want to add alignment stuff to the CSS at a certain point, but don't quote me on that. You might have a search through Kenai to see if there is a feature request for it and if not add one.

  Perhaps you could it with fake labels stretch to fill the available space in the GridPane. For this, you need to disable the restriction of maximum size (setMaxWidth and setMaxHeight to Integer.MAX_VALUE) and ensure your forced GridPane are such that the label will fill the cell. Once you have a stretched label alignment will come into play as the text is aligned relative to the area of the label (as opposed to a manager that aligns the entire label compared to its parent). I think that put a border on the label when debugging to work on what's going on.

  Another less confined but more flexible alternative might be to use variables in your FXML files. You can do this in a number of ways. We must create a bean that has all the variables of your on it with accessors get and then you can move it to your charger FXML namespace and then reference it by using things like ${myConstants.gridAlignment}. Another is to create static methods on a class that a node, these can then be called from the FXML using a notation similar to GridPane.alignment. This second approach only works for things where you want to work directly on the node, but for your scenario which should be ok I think. And then there is always the option to activate a script language in your FXML, allowing you to perform more nothing.

  Hope that helps,
  zonski

• How to align the text with fields of the table values

  Hi friends
  
  My Baisc requirement is to display some values of address with some raising in boxes at the same level as the half left of the page displays address and other half right side of the page displays the values in the boxes, but when I created a table to display the value in boxes, he does not insert text of the Ant at the same level on half of the page as my requirement is
  
  My requirement is
  
  AddressAddressAddressAddress val in a val in a box2 box1 / / I m not able to display any square here box
  AddressAddressAddressAddress val in a box3 val in a box of 4
  AddressAddressAddressAddress val in a val in a box6 box5
  AddressAddressAddressAddress val in a val in a box8 box7
  
  but it comes as
  
  Val in a val in a box2 box1 / / I m not able to display any square here box
  Val in a box3 val in a box of 4
  Val in a val in a box6 box5
  Val in a val in a box8 box7
  AddressAddressAddressAddress
  AddressAddressAddressAddress
  AddressAddressAddressAddress
  AddressAddressAddressAddress
  
  and that's my problem I do not know how to align bot at the same level, any advice would be very help full
  
  Thanks in advance
  
  Thank you
  Pratap

  You can send me your sample xml and RTF, it would be better that I can see the RTf.

• How place of content between the header and tabs?

  I have the header part which must be constant through the portal but below that I have 3 links
  as I AM an employee, employer, broker...
  
  which showed that in the homepage above the tabs...
  How can I do this...
  
  How place of content between the header and tabs...: () kindly help...

  Hey djo
  Try these approaches and see if it works.

  1. in the header Section, page footer you shell header and add a Portlet header. This JSP file associated header Portlet will be all static content in the upper part. In the lower part, add these 3 links say right. Show these links only based on certain properties of the query as isHome. Now for the main book House and another page associate a BackingFile. In this backup file in the lifecycle methods preRender or handlePostBack, get BookManager instance and all pages and see which page is active. For this page, see its page definition label which will be always unique. IF the page def label is like home_page_def (it is the wording of the page def you give to the homepage), then set the value of the key in the request as isHome = true property. The only doubt is after book backingfile is triggered, the header needs to be reloaded, because only then can he pick up the attributes of the request.

  2. create a new portlet as HomePageLinks portlet. Its title property is not Visible and other properties of the UI as NoBorder, etc. NoTheme. The associated JSP will be the 3 links you mentioned fixed right. You can use css styles to make it right. Now dropping this portlet in the header Shell box. You have already HeaderPortlet in the upper part, lower than that, you will have this portlet HomePageLinks. Now associate a backup file for this Portlet show, only if the current active page of books is the home page comparing the label def etc. as mentioned above.

  In both scenarios, only concern is when clicked on different Pages, the entire portal is to be made directly from the header at the top. Only then the backup file will be set the key and the portlet HomePageLinks can show or hide as a result.

  Try to raise an event when the user clicks on the homepage. This port listening for that event can be HomePageLinks Portlet. I guess the event mechanism should work regardless of where the portlet is placed. In the event listner, see if you can show/hide this portlet.

  The only challenge is reloaded must section header whenever you click on a tab.

  Start putting a few files of backup and System.out.printlns to see if the header section gets recharged on, click on the tabs.

  These are just my thoughts on the top of my head. Other users of the forum may have better alternatives or a different version of the above approaches.

  Thank you
  Ravi Jegga