How to analyze the log file which generates the SFC.exe?

Similar Questions

• How to analyze the image url in json?

  Hello

  I get the response from the server and crawled through json. And display it in the field

  Like name1 as:

  try {}
  labelField1.setText (jsonObject2.get("name1").toString ());
  }

  catch (JSONException e)

  {
  System.out.println ("JSONException Description");
  }

  Similarly, I want to make the image. How to analyze the url of the image and display it in the BitmapField?

  You must create a separate thread to extract the bytes of the image of the URL you have.

  You can use the following code to get the image to the server.

  public EncodedImage getImageBytesFromURL(String url){
          ConnectionFactory connFactory = null;
          ConnectionDescriptor connDescriptor = null;
          HttpConnection httpConn = null;
          InputStream inputStream = null;
          byte[] response = null;
          try {
              connFactory = new ConnectionFactory();
              connFactory.setConnectionTimeout(10*1000);
              connFactory.setAttemptsLimit(1);
              connDescriptor = connFactory.getConnection(url;interface=wifi);
              if (connDescriptor != null) {
                  httpConn = (HttpConnection) connDescriptor.getConnection();
                  inputStream = httpConn.openInputStream();
                  int responseCode = httpConn.getResponseCode();
                  if(responseCode == HttpConnection.HTTP_OK){
                      response = readStream(inputStream);
                  }
              }
          }catch (IOException e) {
  
          }finally {
              try {
                  inputStream.close();
                  httpConn.close();
                  inputStream = null;
                  httpConn = null;
                  connDescriptor = null;
                  connFactory = null;
              } catch (Exception e) {
  
              }
          }
          EncodedImage encodedImage = null;
          if(response != null){
              encodedImage = EncodedImage.createEncodedImage(response, 0, response.length);
          }
          return encodedImage;
      }
  

  Remember that this method should be in a background thread. Otherwise, your user interface crashes. The encodedImage that returns the method above can be easily converted to bitmap and set in your bitmapfield.

• How to use the sfc/scannow utility?

  I tried to enter sfc/scannow command prompt, but says my command prompt: you must be an administrator running a console session in order to use the sfc utulity.  It is not necessary to enter an administrator password or log in.  So can not run it.  I logged as an administrator at the start of my pc.

  Hello

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Usually a good idea to run checkdisk afterward.

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to solve the questviewer.exe has stopped working windows 7

  How to solve the questviewer.exe has stopped working windows 7

  using the analysis

  http://www.Malwarebytes.org/

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  Also look for viruses either using avast and spyware using superantispyware

  go to msconfig (type in the search box in startmenu or run in xp, and then press enter) then prepare your computer to clean boot by disabling all startup items and any of the services of windows, and then restart your computer. See if it makes a difference? If it did then you know who caused the problem.

  you will also need to know is that "questviewer.exe"? It belongs to a program? If the answer is Yes try to update or reinstall the program, but before that make sure that the program is not hamful to your pc.

• How to stop the bridge.exe active as to install the new application for example. Flash CC?

  How to stop the bridge.exe active as to install the new application for example. Flash CC? Help, please?

  I can not install any new demand every time.

  Please see:

  http://helpx.Adobe.com/Creative-Suite/KB/error-installation-cannot-continue-bridge.html

  Kind regards

  Ashutosh

• How to analyze the logs in ESX / ESXi

  Can someone explain to me - what are the basics that we must follow to analyze logs in ESX / ESXi?

  Thank you

  Vinay

  See:

  http://www.vadapt.com/2010/03/vSphere-securitylog-files/

  http://www.vmwarewolf.com/which-ESX-log-file/

  http://KB.VMware.com/kb/1021800

  http://download3.VMware.com/VMworld/2006/tac0028.PDF

• How to analyze the files using Lexmark 2600 Series

  To the right:

  I have a Lexmark 2600 Series 3-in-1 printer. It is supposed to be able to scan. However, I can't figure out how to parse the files and I've lost the installation disc. However, the printer is already installed on my computer. I can't analyze. Can someone help me on how to scan files with this printer? Or, is there something I need to do first before that I can use the scanner fuction?

  Hi Xnygga,

  You will need to go to the Lexmark Web site to download the latest software/drivers for your scanner:

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US & segment = DOWNLOAD

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to analyze the data of 10 bytes encoded in the HH306 of Omegatte data logger/thermometer?

  I am trying to write a simple code for a HH306 of OMEGAETTE thermometer/travailleursduweb.com data recorder.

  That is the problem. I communicate with the device via RS - 232, using Labview 8.5.1 and windows xp. I ask her for "all the coded data", which is actually the only option. He returns 10 bytes of encoded data, the manual describes the meaning of each byte and I understand that. The problem is that I can't analyze the information for use in labview, for example: I want to extract the temperature and simply display it.

  on request, I get: 10bytes (read as a string from the serial port read buffer): display HEX: 02 00 A8 48 FF EF B6 49 B6 03 is perfect, and what I expect.     Display codes: \02\00\A8\B6H\FF\EF\B6I\03 The Normal display is a series of special characters, I don't understand, especially since I don't think they are ascii characters that must match returned hexadecimal numbers!   For the life of me, I can't understand how to extract the information (what are the 48 6 hexadecimal display) of what is returned. All string manipulation functions seem to work only on what is given in Normal view. (The 4th and 5th byte of the data are the codes of the BCD for temperature: for example the temperature was 64.8 degrees farenheight when I took this reading).

  Can someone help me to analyze the data returned by this device?

  Ok... I think that I thought about it. I found this: http://digital.ni.com/public.nsf/websearch/77C8F61D36F5A23086256634005ACB38?OpenDocument.

  I guess the normal display garbled is corresponding to each hexadecimal ascii characters. I'm just not used to seeing characters beyond the decimal number 127 ascii or hex 7F.

  So, basically, to analyze the 10 bytes of data:

  (1) break the string read from the serial port in the 10 ascii characters (using String subset vi)

  (2) son of each output string in the left input of 10 separate Type vi Cast.

  (3) wire a constant U8 in each terminal 'type' VI Type Cast.

  cables of 4) the chain of each Cast of Type vi output to the input of a number hexadecimal string vi.

  (5) concatenate or use as you wish as hexadecimal numbers (now in string format) which cause.

  See you soon.

• How to analyze the data of the cDAQ and Signal Express, especially after analysis?

  In the first series of tests of my instrument, it took longer than expected for the race.  Thus, the data was saved in 6 days.  The file is too large for export to Excel.  At the beginning of the project, I was as ignorant as I could go ahead and add analysis and the scaling of measures.  By the scaling, I mean my data of switching current dew points or whatever it is that I record.

  How to evolve the data to read the output data as expected 4mA = point of dew of-20 C or 0 PSIG?  Can I pre program this to be recognized for each event?

  For real analysis I am doing – I would first analyze the data I recorded and choose different points to send to Excel to graph and analyze.  Is this possible?

  Secondly, I would like to know how to scale and analyze my data in the project without having to do this later analysis in the future?

  I have a cDAQ-9172 with LabVIEW signal Express 3.0 that uses four modules - 9211 2 modules of thermocouple, my 4-20 1-9201 module +/-10V module and 1-9203.

  Thank you for any assistance.

  Hi Patricia,

  "' You can do this by adding a step Load/Save signals ' analog '.  I hope this helps!

• How to analyze a .asx file

  I just want to know all the links in the .asx file.

  How can I parse the .asx file?

  is there a class or a method available to analyze the asx file?

  I just analyse because we are parsing XML and it works fine...

• How to analyze the .m3u?

  Hi all

  I get a file m3u of URL containing the playlist. can someone suggest me or give any idea to analyze the .m3u file and how to get the url of file m3u mp3.

  Thank you...

  Download the m3u as a string. then extract the location of the mp3 files and feed them to the application of data flow.

• How to delete temporary internet files which are described as "access denied."

  I tried to erase internet files temporary 'temp' and '%Temp%' records "prefetch". Some I can't delete and I get a message that says "access denied" or "this file is used by someone else. I think I have been subjected to some Martin

  Hello

  1. what operating system is installed on your system?

  2 are connected to the system as an administrator?

  Appropriate files and see if you can remove the files.

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

  Method 1: Remove temporary files in safe mode networking.

  Follow the link below and start in safe mode with network and check if you are able to delete temporary files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode  (For Windows Vista)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode  (For Windows 7)

  Also, follow the link below and run the fix - it and check if the problem persists.

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  It will be useful.

• How to analyze the object in the soap response in Blackberry

  I am new to blackberry develipment.i developed using Momentics IDE. Now, I'm working on the integration of Soap Web service. Now my webservice function call works. I answer also. My webservice response, it's like

  http://shidhints.com/">booleanstringstringint    string    string
  

  While parese the answer, now I can analyze and get the token, NumberofReferral but I can't analyze the ListEmails object. How do I analyze this ListEmails, me, pleasehelp

  const QtSoapMessage& response = m_soap.getResponse();const QtSoapType& responseValue = response.returnValue();
  
  m_Token = responseValue["Token"].value().toString();
  m_NumberofReferral = responseValue["NumberofReferral"].value().toString();
  

  use QtSoapArray for that.

  I think this could work:
  QtSoapArray & email = (QtSoapArray &) responseValue ["ListEmails"];
  work with count() and iterate over the table to retrieve the values.

• How to analyze the results?

  Hi Adobe community.

  I am new to creating forms and I was wondering if there is a way to analyze the results? The tutorial presentation stops at creating forms. I searched on the analysis of messages, but found none. Looking for probably is not the right terminology.

  Thank you

  LF

  You can merge the results of several forms in a CSV file very easily. In Acrobat XI, it is under Tools - forms - more form Options - merge data files into spreadsheet...

• How to write a log file?

  I have this function at the bottom and I tried to write the query result in the log file, but it failed each time that I ran. the CFLog tag as third line from the bottom. Any suggestion is appreciated.

  < name cffunction = "getCommonSpotPages" access = "public" returnType = "query" >

  < cfset var qryCSPages = queryNew("") >

  < cftry >

  < name cfquery = "qryCSPages" datasource = "#application.sitemap.sDSN #" >

  Select p.ID, s.subsiteURL, p.filename, p.DateContentLastModified, u.publicFileName, p.uploaded as bIsUploaded, s.uploadURL,.

  (select fieldValue dfv data_fieldValue where p.ID = dfv.pageID and dfv.fieldID = #application.sitemap.nPriorityFieldID # and dfv.versionState = 2) as nPriority,.

  (select fieldValue dfv data_fieldValue where p.ID = dfv.pageID and dfv.fieldID = #application.sitemap.sFrequencyFieldID # and dfv.versionState = 2) as sFrequency

  of PagesContrat p

  Join s subsites

  on p.SubSiteID = s.id

  left join UploadedDocs u

  on p.id = u.pageID

  where (p.expDate is null

  OR p.expDate > GETDATE()

  and p.pageType = 0 <!-downloaded documents and content pages only->

  and p.approvalStatus <>1 <!-/ / exclude inactive pages-->

  and s.siteState <>0 <!-/ / exclude inactive subsites->

  and s.subsiteURL not like '% training %' <! - specify all pages within the subsite to be excluded from the site map - >

  and not s.ID (< cfqueryparam value = "" #application.sitemap.lstExcludeSubsites # "cfsqltype =" list CF_SQL_INTEGER"="yes"/ >) <!-/ / exclude particular subsites->

  order by p.ID desc

  < / cfquery >

  < cfcatch > < cfdump var = "#cfcatch #" > < / cfcatch >

  < / cftry >

  < cflog text = "' #qryCSPages # ' type = 'Information' leader 'queryPages' = >"

  < cfreturn qryCsPages >

  < / cffunction >

  The tmpResult.sql is that print the SQL that is executed from query.

  You can't SEE where to save newspapers.  They are available at [DRIVE] / cfusion/logs - go and look for your newspaper.  It is accessible also through CFAdmin, under DEBUGGING AND LOG.

  HTH,

  ^_^