How to assign a process to some people/role to start?

Similar Questions

• Assign pedal for only some sounds in a patch?

  I'm a newbie on MainStage 3, and I ran everywhere I can not solve a problem on many patches that I am programming.

  I would assign my pedal to some sounds in a patch, but not others.  (For example, I want to support to the sounds of piano, carpet and string in a patch, but not for a sound of arp in the same patch.) How would I go to do this?  (A lot of searching through forums/YouTube tutorials has not yet found the solution of it.)

  Thanks for any help you can give!

  In edit mode, click on the channel strip for the sound you don't want to respond to the sustain pedal.

  Then, in the Inspector of channel (down to the center of the screen), click the input tab MIDI.

  On the left side, you will see a list of check boxes labeled "filter". Select the item of "pedal of Sustain (64) ' in this list, and the synth assigned to this channel strip no longer meets the sustain pedal.

  I use this feature a lot in my plots of control meets various controllers synths. For example, I often will filter the controller "Expression (11)" so it does not affect the piano sounds (because the volume of this noise is controlled by the speed), but it affects organ or horns or other.

• How to assign values to the application points to leave on a table

  Hello

  I have a FORM on a table with two or three elements. How to assign values to the elements of the application with the values in the elements of form, every time the value of the element is entry, change or page is sent?

  I created a dynamic action to the region level with Event - change to run the suite of PL/SQL, I tried with 3 different ways in PL/SQL, as shown below, but it didn't work.

  BEGIN

  : APP_FY: =: P1_FY;

  END;

  BEGIN

  APEX_UTIL. SET_SESSION_STATE ('APP_FY', v ('P1_FY'));

  : APP_FY: =: P1_FY;

  END;

  BEGIN

  APEX_UTIL. SET_SESSION_STATE ('APP_FY', v: P1_FY);

  END;

  Then I created an action dynamic at the ITEM level with change event to run the suite of PL/SQL and tried with PL/SQL, as shown below, but it didn't work.

  I need to assign values to the elements of the request form as these elements of the application will be used in many other pages in the application. How to I get there?

  Thank you.

  If a dynamic action of PL/SQL execution, you must send your list of page elements in the parameter "Elements of Page to submit.

  See the section 'run pl/sql' for this post.

  If the page is submitted, the elements of the page will be automatically set to session state, and you can have a page process make the code you have.

• How to assign the value to the application-level element

  Hello

  I'm learning to APEX.  I use version 4.2.6.

  My question is, I set a text field called 'FINANCIAL_YEAR' in the login page.  I wanted to know how to assign this value to a text element of Application level (on page sent), so that I can get this value through at my request.

  Thank you

  -Anand

  anand_gp wrote:

  Yes, I created a 'text area' under 'HTML' in the 'Home' page  Who accepts the exercise of a table through LOV.  I intend to assign this value to a global variable so that this variable can be read in any of the application to filter the result set from different tables (not yet built the rest of the application).  To do this, I was intending to use "Shared components"-> "Elements of Application".  I'm still not quite sure how it works.

  Start by reading the documentation on elements of application.

  Go to the shared components > Application parts and create your G_FINANCIAL_YEAR item. Value Session State Protection Restricted - can not be set the browser so that the value is not editable by the user, falsification of URLS or scripts.

  On the home page, if there is not already a button to submit the value of the fiscal year, add one in the HTML area, with the Action as a submit Pageclick. Otherwise, you can do without the button and using submit Page in Page Action when the changed value select the parameter in the list so he can undergo.

  Then, in the section of the Page processing, create a calculation:

  Point Type: Application-level element

  Calculate Item: Application: G_FINANCIAL_YEAR

  Point calculation: After submit

  Type of calculation: Value of the element

  Calculation:

  Run the application, select a value in the list of the fiscal year and submit the page. Review of current session state in the viewer of session state by clicking on the link of Session in the toolbar developer. Select the Elements of Application in the view list, and then click set. The element of your application and its current value must be visible. You can now reference value throughout your application by using the appropriate syntax.

  You should also consider if a default value (for example the current year) using a calculation Application from the point of calculation on the new Instance and coordinate the application point and part of the homepage using point application as the Source of value or an expression with Source page element, the value always, replacement of value that exists in the session state.

• How to assign shared ASO members

  Hi all
  I am not able to understand how to assign shared ASO members. Tried the same model that used in OSI, however, I am not able to get the shared member property.
  There are in our case:
  
  In the same dimension, we have multiple hierarchies, the level 0 members of one of the highest hierarchy must be shared by other hierarchies in the same dimension.
  
  Some doubts are:
  
  1 we need to allow members to duplicate.
  2. is there that a setting needs to be changed "to activate the shared members' ASO.
  
  
  Kind regards
  Krishna

  Hello Krishna,

  There are three different types of hierarchies in the model of the ASO.
  (1) stored
  (2) dynamic
  (3) several hierarchies enabled.

  I guess your dimension is stored type.
  Just change your dimension with multiple hierarchies enabled property and follow the below three rules

  (1) not shared instance of the Member must take place in outline before all instances of the shared member.
  (2) the first hierarchy in a dimension where multiple hierarchies are activated cannot contain a shared member.
  (3) size of the stored hierarchy cannot have shared members. Hierarchies stored in a multiple hierarchies dimension can exchanged members.

• How to assign the value to the particular text box field

  Hi all
  
  My requirement is to call the Web service with the participation of the ADF page.
  
  The steps I did:
  
  1. I created a data control to the WSDL-based Web service.
  
  2. simply drag and drop the process, it is automatically created the form with the fields of entry, press the Process button
  
  3. when I entered the values and then process button, it'il pass web service values corretly.the is called with the values entered correctly.
  
  4 but when I try to assign the value of some other material that does not work.
  
  I am assigning value to the value field navigate to the properties of the particular field = "CRΘER."
  
  When I like what the value is displayed on the screen. But it will not pass the value to the web service.
  
  I think that the value is only the display on the screen. Stored not at the level of links. Kindly guide me in this.
  
  Thanks in advance
  C.Karukkuvel

  Hello

  Just the previous value placed on the next to put that into the first field level JSpx
  

  If not put a valueChangeListener and EL Expression to set the value

  Kind regards
  Suganth.G

• How to assign a value of the element from page to main page in the column element when Cre

  I have a form build on table T1. The T1 has a primary key defined (T1PK) and four other columns (C1 - C4). I have a form in this table. This form accepts the values of C1 to C4 and displayis an extra point, is not based on columns of T1 - P1_DUMMY. The form for T1PK element has the value "hidden and protected.
  When creating the form, I wanted that the value of the primary key (T1PK) will be obtained through existing trigger. I want to use the value stored in the page called "P1_DUMMY" for P1_T1PK.
  
  No matter what I do, I always get this error when I hit the button 'CREATE' on the page of the form:
  
  ORA-01400: cannot insert NULL into ('DEV'. "" T1 ". ("' T1PK")
  
  The Create button is a condition not to show if the the P1_T1PK page element is NULL. I created page rendering process, the process of transformation of page like this bock of PL/SQL:
  
  : P1_T1PK: =: P1_DUMMY
  
  But I still get ORA-01400. The form has the P1_DUMMY as display only, not not to store the State, so I can see that the P1_DUMMY element has the value I want (2).
  
  How to assign the value stored in P1_DUMMY in P1_T1PK when I click on the button CREATE on this form?
  
  Thank you for your time.
  
  Daniel

  Hello
  The belief question is the way in which the calculation is being defined. You are not using the &. rating (dot ampersand) in PL/SQL and SQL.

  Try this.

  1 define the calculation on P1_T1PK of Type calculation of value of the element
  2. on the next page to load textarea, enter P1_DUMMY. No. colon or &
  3. give appropriate conditions

  Kind regards

• How scam assignment affects iPad and iPhone

  How scam assignment affects iPad and iPhone

  UH... What? Could you elaborate?

• Satellite L300-2 - How to assign a new email address when registering

  I am writing this message on behalf of the end user of our Toshiba.

  She bought the TOSHIBA Satellite L300-2This and because she didn't have an internet connection at home, I order him to register his new Toshiba by our care.
  I took his laptop and I made a mistake by e-mail. I wrote the wrong email address. How to assign a new email address?

  Best regards

  SAMO Praprotnik

  Hello Samo

  If you have registration problems, please contact Toshiba [email protected]

  You should contact Toshiba in your country. Details are at http://eu.computers.toshiba-europe.com/innovation/contact_toshiba.jsp

  Explain what is the problem and I hope someone will help you.

  Post edited by: ADMIN

• I download the ios9.2 but I can't download the application on the Apple App Store. Some people say to delete the old App Store, but cannot download the new App Store. Please help me. Thank you.

  I have download the iis 9.2 application, but I can't download the application on Apple App Store.Some people say need removes the old App Store and download the new AppStore.I can not download the new app store. Please help me. Thank you.

  Can't download what app? What happens when you try? The App Store is part of the operating system. You can not download separately.

• How to assign a keyboard macro to a keyboard shortcut

  Does anyone know how to assign a keyboard macro to a keyboard shortcut?  I'm spoiled CodeWright by, if there is no selected item only when a 'Ctrl c' is issued, CodeWright automatically copy the line that the cursor is located. I'm trying to replicate this feature and the only way I can see it's a macro of the "copy line" keyboard right click on command.  Any thoughts?

  NABI:

  Looks like you're talking about modifying the source code.  I don't know a way to create your own keyboard macro.  You can change the shortcut key assignments (CVI 9.1: Options-> change the shortcut keys), but it seems that you need more than that.

  To make your example (a line no copying), I often have to press Ctrl-O, to cut the current line, immediately followed by a Ctrl-V to restore the original line.  This line is still in the buffer zone of the Clipboard, so I can go where I want the copy of the original line and press Ctrl + V.

  In the event that you do not change the code but create shortcuts for your users in your application, you can catch the EVENT_KEYPRESS in your panel or command callback callback and check for key code combinations.  See the multikey.prj example program comes with CVI and the CVI for EVENT_KEYPRESS help.

• How can I email a card for people who use my SkyDrive?

  How can I email a card for people who use my SkyDrive?

  How can I email a Christmas card to people who use my SkyDrive?

  It has nothing to do with Word, but you either put the Christmas card in the Public folder and send link to this folder for people who want to 'receipt' card, or create a new folder and invite these people to access this folder in which you put the Christmas card.

  Should ask questions about SkyDrive in http://windowslivehelp.com/

• How to assign the TAB sequence?

  Hey...

  Can someone tell me how to assign tab...? I mean if I have a few buttons and controls on the front panel are trying to view the login Panel; whenever I press TAB on the keyboard, I want that the selection of buttons & controls should be in order... Can someone tell me how...?

  See the order of Edit\Tabbing, and with the right button on the control of Navigation Advanced\Key

  See you soon!

• How to assign different drive letter in the new hard drive?

  My hard drive for OS window is broken, which is the C: drive, so I buy a new HARD drive, but my original D: drive become a C: drive and new HARD drive is assigned with drive E:, I can't restore my Ghost in new HARD drive image, because the image is restored in the C: drive only.

  Anyone have any suggestions on how to assign different drive letter under cmd?

  Thanks in advance for your suggestions

  Hi oem7110,

  Follow the steps in the article.

  How to change drive letter assignments in Windows XP

  How automatically assign a drive letter by using the Diskpart.exe command on a Windows Server 2003-based computer or on a Windows XP-based computer

• How can I use process explore check PID 1176 60% CPU svchost.exe? Help, please.

  As the title, how can I use process Explorer to check PID 1176 60% CPU svchost.exe? Help, please.

  The task manager has PID 1176-60% CPU, all the time, which I believe is the reason my pc works so slow.

  How to use Exp Pro to know what is actually using 60% of my cpu, via svchost 1176 PID?

  I found the Exp Pro Geek guide - but are struggling to pass for a non geek.

  Using Vista 32 bit.

  Thanks in advance for any answers.

  Process explore uses more resources than svchost, it works automatically using a lot of memory. Anyway, the open task

  Mgr, locate the svchost, R.click on the location of TI/properties/open a file. You will find that it is a service of microsoft.

  The drain is usually in BITS, try to go to run, or cmd, type: services.msc in msc, locate BITS, R.click on it, open,

  Set to manual start, exit msc, restart the pc.