How to assign another admin as main administrator

Similar Questions

• How to change the main administrator in my CC team?

  How to change the main administrator in my CC team?

  Hello

  I'm afraid that the admin can be modified to your order at the time, but you can add more than one administrator console. You can also consider to reorganize with the correct email address.

  To add multiple administrators, see help here - manage your cloud creative teams membership

  ^ Ani

• How to remove a user account from microsoft since the local account main administrator?

  Basically started nitialy I entered my email incorrectly. Then I created a new profile with the correct e-mail and he agreed to become a microsoft account. Then I deleted the old start microsoft account via the browser, as it was useless, because I could not verify that the email was incorrect, and I could not change this without checking the account... Bit of an odd he implemented.

  anyway. Now my main Administrator profile is not a profile of microsoft and electronic mail microsoft profile has no administrative privileges. I also want that one account as theres not point have two if they are identical. I tried to go to the users and manage the account but can't see anywhere. Please help me through this mess

  Hello

  I understand that you are unable to remove a user account that is not listed in the control panel under users, manage account.

  Follow these methods and check if that helps.

  Method 1:
  Please refer to these steps on how to remove a PC user account.

  To remove an account from your PC

  You must be logged in as an administrator to perform these steps.

  a. drag from the right edge of the screen, tap settings, and then tap Change PC settings.
  Press or click accounts, and then press or click on other accounts.

  b. press or click the account that you want to remove, and then press or click delete.

  c. press or click delete the account and data. (Please back up all important data before you delete the user account).

  d. it may take a few minutes, if the account has a lot of associated data.

  Method 2:
  If you are not able to find the user account, and then follow these steps.
  a. press Windows + R and type netplwiz, and then press ENTER.

  b. in user accounts, select the user tab.

  c. now, click the account you want to remove and click Remove.

  Check if it helps. If the problem persists, we would be happy to help you.

• How can I change id of e-mail as a main administrator

  you wanted to change my id as primary administrator for a centralized control over licensing. as I owe to my connection records two of the company ID, which can be common?

  If the CC for the team is an indirect purchase IE through a new seller, then you can contact the Support from Adobe to change the main administrator.

  If the purchase of the CC for the team is directly from Adobe store, purchases the main Admin cannot be changed however secondary admin can be added.

  There are certain privileges attached to the primary admin as your billing information console.

  You can cancel this CC & buy new CC team with the desired main admin. Members have just unassigned from their seat & then on purchase costs, they must send invite them again.

  Users must simply disconnect & reconnect once they accept the invite command new CTC.

  Concerning

  Baudier

  Change the main administrator

• How to assign a value of the element from page to main page in the column element when Cre

  I have a form build on table T1. The T1 has a primary key defined (T1PK) and four other columns (C1 - C4). I have a form in this table. This form accepts the values of C1 to C4 and displayis an extra point, is not based on columns of T1 - P1_DUMMY. The form for T1PK element has the value "hidden and protected.
  When creating the form, I wanted that the value of the primary key (T1PK) will be obtained through existing trigger. I want to use the value stored in the page called "P1_DUMMY" for P1_T1PK.
  
  No matter what I do, I always get this error when I hit the button 'CREATE' on the page of the form:
  
  ORA-01400: cannot insert NULL into ('DEV'. "" T1 ". ("' T1PK")
  
  The Create button is a condition not to show if the the P1_T1PK page element is NULL. I created page rendering process, the process of transformation of page like this bock of PL/SQL:
  
  : P1_T1PK: =: P1_DUMMY
  
  But I still get ORA-01400. The form has the P1_DUMMY as display only, not not to store the State, so I can see that the P1_DUMMY element has the value I want (2).
  
  How to assign the value stored in P1_DUMMY in P1_T1PK when I click on the button CREATE on this form?
  
  Thank you for your time.
  
  Daniel

  Hello
  The belief question is the way in which the calculation is being defined. You are not using the &. rating (dot ampersand) in PL/SQL and SQL.

  Try this.

  1 define the calculation on P1_T1PK of Type calculation of value of the element
  2. on the next page to load textarea, enter P1_DUMMY. No. colon or &
  3. give appropriate conditions

  Kind regards

• Change the main administrator

  The lead Director on our account left, so it needs to be changed for me.

  I see that there is in "Team management", then "Licenses" Xs "remove users from this license." What is the way to do it?

  I read a lot of related issues. They all seem to conclude that it is impossible to do unless you contact support.

  Change the primary administrator

  How to move from the role of the Chief Executive to another Member of the team?

  I need to retire as the main administrator for a CC account and give way to another administrator. How should I proceed?

  Chief Executive Officer of change for the cloud team

  How to move from the role of the Chief Executive to another Member of the team?

  The purchase of the CC for the team is since Adobe store directly, in these purchases that the main Admin can not be changed however secondary admin can be added.

  There are certain privileges attached to the primary admin as your billing information console.

  You can cancel this CC & buy new CC team with the desired main admin. Members have just unassigned from their seat & then on purchase costs, they must send invite them again.

  Users must simply disconnect & reconnect once they accept the invite command new CTC.

  Concerning

  Baudier

• How to restore my admin account corrupted? (No available backup.)

  Detailed explanation

  A few days ago I started my computer and was taken directly on repair screen windows because my computer was seemingly impossible to start. After you run the tool to repair for a few minutes, Windows told me that there was no solution, then I just restarted the computer. After that he started off very well and I thought that everything was resolved. But yesterday, after that I connected with success, my mouse and keyboard suddenly stopped responding. I used the power button to manually restart my computer. I tried to log in again, but I got the error message "user profile Service failed.

  Now, whenever I try to login, I get the message "The user profile Service failed" immediately after entering my password. I've logged the standard guest profile and tried to change the registry, according to the first method found here, administrator privileges are required to change the registry but whenever I type my admin password in the administrator privileges prompt, nothing happens (it accepts the password, but then does nothing). So it appears I can not use my admin password for administrator privileges.

  Then I booted safe mode and tried to login to my admin account. It actually allowed me to login using the admin password, but whenever I tried to click anything like 'Create an account', nothing happened. So it appears I can connect to the Safe Mode admin account, but I can't do anything on this account.

  I'm downloading 15.2 Hiren's BootCD because that this discussion leads me to believe that he might be able to copy files from my admin profile to a new profile without asking me administrator privileges. Another problem is I got lazy, so I have not backed up the files or programs in months, so I need to create a new admin account and somehow copy all my files and programs without losing them accidentally. I have a terabyte of hard drive that is over half full of games and important documents, so I can't lose the data stored in my damaged account.

  Summary

  I can't login to my admin account only because it is damaged. I can access safe mode, but I can't do anything in Mode safe (for example when I click on "Create an account" nothing happens). I can't edit the registry profile comments, or do anything that requires administrator privileges because the admin password doesn't seem to work. None of my programs or files are saved. I need a method by which I can repair my current admin account or create a new admin account and copy it on all my files and programs.

  Information System

  Windows 7 Home Premium
  64 bit
  Avast! Free antivirus (it is likely is the free version of avast! a virus slip by and corrupt my account?) I've never had any problem with avast! in the past).

  I did turn my PC of house built for almost two years now without any major problems. It is pretty quiet most of the time, but I noticed some hum slightly stronger and clicking while starting from the beginning of these problems. There again, I could just be imagine. I can post the exact hardware specs if anyone thinks that profile corruption could be caused by a hardware problem. When I have time I'll pop the case open and see if I can see obvious internal damage.

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Whento download iTunes for separate iTunes accounts linking 10 separate Windows to make user accounts, I download iTunes from the first main administrator account, or does it download it separately in our own Windows user account

  If we want to have separate iTunes accounts running from Windows 10 separate user accounts can I download iTunes on the first main administrator account, or does download it separately in our own Windows user account

  Install it from the admin account, and then all user accounts will be able to use it.

• Satellite L300-2 - How to assign a new email address when registering

  I am writing this message on behalf of the end user of our Toshiba.

  She bought the TOSHIBA Satellite L300-2This and because she didn't have an internet connection at home, I order him to register his new Toshiba by our care.
  I took his laptop and I made a mistake by e-mail. I wrote the wrong email address. How to assign a new email address?

  Best regards

  SAMO Praprotnik

  Hello Samo

  If you have registration problems, please contact Toshiba [email protected]

  You should contact Toshiba in your country. Details are at http://eu.computers.toshiba-europe.com/innovation/contact_toshiba.jsp

  Explain what is the problem and I hope someone will help you.

  Post edited by: ADMIN

• my main administrator password is not letting me access my laptop?

  can someone help me as soon as possible! my main administrator is not be accessed through the password that I used and I need to access my files.

  Hello

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126/en-us

  I also suggest you to perform the system restore and check.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  http://support.Microsoft.com/kb/940765/en-us

• How to find out who is the administrator account on my laptop if there are three users

  My son and daughter created the user account on my laptop how I tell me who is the administrator user and change in me. now, I can not even run or install your antivirus to protect my laptop because it asks me to the administrator. any suggestions?   either by the way, I have version XP of Windows 7... the gardener in version in the forum section has no XP version of windows 7.

  My son and daughter created the user account on my laptop how I tell me who is the administrator user and change in me. now, I can not even run or install your antivirus to protect my laptop because it asks me to the administrator. any suggestions?   Incidentally, I have version XP of Windows 7... the gardener in version in the forum section has no XP version of windows 7.

  What does that mean? There is a Windows 7 or Windows XP, but not the version XP of Windows 7. Or do you mean "Windows XP Mode", which has been installed on a full Windows 7 Edition-Professional host? I'm a bit confused.

  Next the administrator account number-> may request to your son or doughter - they know what account is a member of the admin group (and they also know the password for this account).

• How to remove an admin account and create a new user profile

  Hi, I have been using my 2 in 1 PC since July last year and I'd like you guys to show me the steps on How to remove an admin account and create a new user account.

  Hello Nicolas,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you try to delete a local administrator account?
  2. are you able to connect using the Microsoft account?

  Thank you for your query details.

  I also like the fact you want to know how to remove an administrator account and create

  a new user account.

  If you are able to connect on the Microsoft account, I suggest you try the following steps to remove an administrator account.

  a. press Windows + X keys and click on computer management.
  b. click on "local users and groups" and then click on "users".
  c. right-click on the account which you want to remove, and then click 'Remove'.
  d. click 'Yes', if the prompt message.

  To create a new user account, please see this article:
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  See also:
  User accounts: FAQ
  http://Windows.Microsoft.com/en-us/Windows/user-accounts-FAQ#1TC=Windows-8

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to find information from the Team administrator

  Hello

  We try to make changes to the composition of our team, but we are unable to find information on the search for the connection that has been created for the administrator of our team. We hoped to find additional information on how to locate this information, or how to assign the administrator account on the team to someone else.

  Thank you

  -Jim

  Hi Jim,.

  In addition, you can refer to the CC for teams FAQ: Creative cloud for teams FAQ: How can I manage my account teams?

  Hope that helps!

  Kind regards

  Sheena

• How to assign a screen configured messaging task in the workflow

  Man of me but I can't seem to find the solution for this.

  I created a whole screen for task and together the screen created a messaging for the new job template.

  Then I add a task of e-mail to a request workflow, but nowhere can I find a screen parameter which defined the task of e-mail must use.  The properties of e-mail has a drop-down list for which model to use, but it has only one value: e-mail task and who uses the Standard Messaging task.

  I missed a setting that allows me to decide what model/game screen it should use?

  Thank you

  .. Mick

  Hi Mick,

  I guess you missed a step - you must assign the new model to a particular file type "Task - email task" (200).

  Reach

  Admin-> system-> System Administration-> the Types of messages

  and assign to this model.

  After that, you should be able to specify the new e-mail template in e-mail task.

• How to assign multiple responsibilities of user OBIEE

  Hi all
  
  How to assign multiple user when responsibilities OBIEE integrated with EBS R12.
  
  For example, I XXX_Custom, XXXX_Custom1 responsibilities of user1 in EBS. When I navigate to EBS to OBIEE how to get these two responsibilities. It is currently only a single responsibility.
  
  Thank you
  Srikanth.

  Ensure that EBS GLOBAL security context. User_name is assigned to the: variable system target session USER.

  Also in init block group change cela roles and use SQL in DataSource code change.

  SELECT '' DISTINCT ROLES, RESPONSIBILITY_NAME OF
  FND_USER, FND_USER_RESP_GROUPS, FND_RESPONSIBILITY_VL
  WHERE
  FND_USER.user_id = FND_USER_RESP_GROUPS.user_id
  AND FND_USER_RESP_GROUPS. RESPONSIBILITY_ID = FND_RESPONSIBILITY_VL. RESPONSIBILITY_ID
  AND FND_USER_RESP_GROUPS. RESPONSIBILITY_APPLICATION_ID = FND_RESPONSIBILITY_VL. APPLICATION_ID AND
  FND_USER_RESP_GROUPS. START_DATE< sysdate="">
  (CASE WHEN FND_USER_RESP_GROUPS. End_date IS NULL THEN SYSDATE TO_DATE (FND_USER_RESP_GROUPS.end_Date) to ANOTHER END) > = SYSDATE
  AND FND_USER.user_id = (SELECT USER_ID FROM FND_USER WHERE USER_NAME = ' VALUEOF (NQ_SESSION.) THE USER) ";

  In order to change, just check the initialization of sage online and do not allow caching.

  Save the changes and deploy this RPD, restart OPMN services and you should now see all the responsibilities of the EBS to OBIEE.

  Have you created roles in EM with the same name of responsibility?

  I hope this helps. Pls mark if he does.

  Thank you
  SVS

  Thank you