How to boot from a virtual Windows disk - 10 Workstation - TPG

Similar Questions

• How to boot from a USB - Portege R500 flash drive

  Hello

  I have a Portege R500 running Windows XP, presented about 2 years ago and recently contracted a virus that has infected some of the startup files as the minute I connect it disconnects again, even in SafeMode! The quickest way I can think sorting is to reformat with the XP Recovery disk and reinstall windows.

  Problem! The CD/DVD drive on the computer laptop stopped working earlier, tried almost everything in the thread on this site, but had no luck.

  So my plan was to boot from a USB flash drive and do it this way. However in the boot parameters I only have the options of HARD drive / floppy drive / CD-ROM / LAN, none of them work. Does anyone know how to boot from USB flash drives?

  Any help would be really appreciated

  Hello

  As far as I know, it should be possible to boot from USB FDD

  I don't know if you would be able to boot from a USB flash drive, but it of certainly worth a try m

  Generally, you can try to press the F12 key when the laptop is turned on.
  A start menu should appear on the screen, then you should see all bootable devices.

  PS: as far as I know the USB startup was available in ToshibaHWSetup (tool of Toshiba which changes the settings of the BIOS under windows OS.) So I guess boot from USB must be possible.

  Welcome them

• Satellite 1800-804: how to boot from a USB device?

  I have a 1800-804 satellite and I would like to know how to start Notepad from a usb device.

  Hello

  If you want to boot from the external HARD disk or USB stick key this option is not possible.

• How to boot from simulated USB (flash drive) mass storage device?

  I do some development work on the anaconda, the Installer used by Red Hat Enterprise Linux and reconstructions based off of him.  I'm testing support of USB flash drive facilities and would rather test my changes using image files from a USB drive physical - a bit like editing an .iso image to a CD instead of using a physical CD of closure.

  I found a reference to the Framework of Linux-USB Gadget API, which looked exactly like what I was looking for.  After the reconstruction of the almond, I was able to run:

  • modprobe dummy_hcd
  • modprobe g_file_storage file = CentOS - 6.2 - i386 - netinstall.iso

  After that, the office immediately get the image as if I had actually plugged a USB stick with the same content.

  I am also able to connect this virtual USB device to a virtual machine, but when I start the virtual machine, it has no option to boot from the virtual USB device.

  Any ideas?

  VMware Workstation does not directly support boot from USB but you can use a third-party utility called Plop Boot Manager to boot a bootable USB disk and you may be.

• Satellite M40-185 - how to boot from USB?

  I have a Toshiba Satellite M40-185

  I could not a off of usb because the two Mafany usb boot option

  Options for the device
  1. HARD DRIVE
  2 CD-DVD
  3 FDD
  4 LAN

  How to boot from usb?

  Hi esc.

  I think that you have answered the question yourself because you've posted all the startup options that are available and there is no option to boot USB on this laptop.

  All you can do is to install the latest BIOS, but as far as I know Satellite M40 can t boot from USB!

• Qosmio G35-AV600: I don't know how to boot from a CD - R

  I'm having the problem of 'Bad Machine' and I downloaded the utility DMI.
  I don't know how to boot from a CD - R. I don't have a floppy drive. Help me Toshiba.

  In fact, I burned the .iso to a CD image file and kept pressed 'c', while starting my computer was. I did not work.

• How to boot from USB FD in HP Pavilion Sleekbook 14-b035tx

  How to boot from a flash drive? I pressed F10 and go into the BIOS menu > System Configuration > start, in the start options Options, I have not found my flash drive...

  Hello:

  See if you change the setting to enable the legacy mode/disable secure boot bios to start on a different device.

  See this link...

  http://support.HP.com/us-en/document/c03736054

• XPS 12 / Win 8: how to boot from the recovery partition / reinstall Windows?

  Messed up things on a newly purchased 12 XPS in Windows 8, and I want to boot from the recovery partition and reinstall windows.

  Support online pages point by pressing F8 during startup, but this does not at all.

  How can I access the recovery partition?

  To access to the menu of, , press F2.

  To enter the boot options menu, press F12.

  Because the XPS 12 boots so fast, it is better to repeatedly press F2 or F12 after restarting the machine. During the startup process, texts for options should appear at the bottom right of the screen. If you enter Windows, you will need to restart again and press F2 or F12 until it works. However, I don't think there is an option in the BIOS to restore the computer to its factory condition. The previous post by DELL-VIKRAM M describes how to properly restore the machine to its factory state.

• How to boot from USB-drive on Compaq Presario CQ57 400SO

  Hello!

  I have a Compaq Presario CQ57-400SO I want to install Windows XP instead of Windows 7, which is included. I had two questions now since I hit a few bumps.

  1 at - not, at all, driver support for Windows XP to get their hands on?

  2. How am I suppose to boot from USB (my DVD-ROM is broken)?

  + Have converted my installation of Windows XP on USB disk.

  -J' have tried to change the boot order, and no, the USB is not marked with! so it should work.

  -J' tried by pressing F9, that gets me the Boot Option menu. But once I press the USB it goes right to the Windows (the pre-installed).

  Thank you in advance.

  Kind regards

  Robin

  Hi @kvartsnorsk

  Welcome to the Forums of HP Support!

  I know that you are looking for drivers for Windows XP, unfortunately, this laptop was not sold configured for this OS. Drivers are available for windows 7 and 8 (32 and 64 bit)

  What happens if I do not see my operating system?

  On the boot USB device, it is likely that your bootable usb image isn't UEFI, so you should enable legacy boot in the BIOS to allow boot off this device.

  UEFI and the Start Menu

  The Legacy Boot mode - NeoSmart Knowledgebase

• under win8.1, how to boot from a dvd using UEFI on a hp 700-109 c desire?

  I installed a Kingston ssd 120 GB in the 700-109 c and you want to use clone drive ACRONIS to reduce proportionally the 2T dirve to the win8.1 120 GB and boot from there.  I can't activate the legacy in BIOS support because the software warns UEFI to boot from the disk of destination after the migration, must be enabled before we start the cloning process.   However, I am not able to boot from the dvd Kingston (ACRONIS) with secure boot UEFI active.  How do I proceed?

  Hello

  Cloning of the HD under Windows 8 is sometimes problematic. You must disable Secure Boot and turn on legacy mode. Your PC should reboot. I can boot Windows 8 as well in Legacy and UEFI mode with my HP laptop that the use of Windows 8.

  As a side note, usually with UEFI, you will need to insert the CD, and then the PC power cycle for UEFI to recognize an eligible UEFI device such as a CD or USB flash.

  A problem you will encounter is that the bootloader of Windows 8 will demonstrate to the sata hard drive after the clone so it does not start. Another possible cause is that the HP recovery partition is not going to work. Don't forget that you have a set of HP recovery or USB flash drives.

  Paragon makes one a great migration and cloning for windows8 utility which also contains a boot corrector function to manage the windows bootloader question. It is 8.1 compatible window is available for $12.   There is even a video available.

• How to boot from the CD from Toshiba - Satellite 2450-101?

  Hello everyone,

  I would like to know how to start from the cd to install windows xp.
  I have a toshiba laptop (Satellite 2450-101).
  I'm not sure but I think dat This model has a DVD player in scii. Dat is the problem?

  Kind regards
  Steve.

  Hello

  If you use the internal CD/DVD drive you press simply the C key immediately after starting the laptop or you will simply change the boot order in the BIOS to CD/DVD drive.

• How to boot from USB?

  I was really disappointed when I discovered that my PC always run in error when I chose to boot from USB.
  
  Error: Unable to boot from USB, Press Enter to Cointinue >

  My specs:
  HP SleekBook14 (Windows 8 factory installled)
  CPU: Intel Core i5

  HARD DRIVE: 750 GB
  Graphics: Intel HD Graphic 4000 and Nvidia GeForce GT 740M

  Please HP give me a quicker response... I want to boot from USB in order to install another OS like Ubuntu and Else

  You extract the files on the disk? I forgot extract the iso file when I was installing Windows 8.1 and it showed the same message. I extracted and it was good.

• How to boot from USB CD? (S1800-804)

  My internal CD/DVD unfortunately no longer works.
  I bought an external CD 'HIGH SPEED RECORDING EXTERNAL DRIVE QuieTrack ASUS' that works well.

  But how do I boot from it? I would like to reinstall using the recovery CD.

  Currently using Windows Millennium Edition.
  BIOS 2.0.

  Hello
  so as much as I know your Notebook isn't supports startup by an external device.
  You can just boot from the devices that a listed in the bios (like hard drive, floppy drive, CD-ROM internal).

  Good bye

• J2V78UAR #ABA: cannot boot from Usb when window 10 is installed on the laptop...

  Recently I bought the new laptop HP AMD E1-2100 unfortunately I Format C drive and install the new window 10... Now I have installed window 10 but I do not use the window 10 because it is not perfect as window 8 or 8.1...

  I want to reinstall window 8.1 Bootable USB on my laptop but it does ' t boot from usb even I changed the Boot order... IE

  USB floppy disk hard key/Usb

  USB CD/DVD drive

  OS boot manager

  Network card

  Please suggest me what I do?

  A key USB bootable you have created by recovery media creator?

  Go into the BIOS, use the tab of the System Configuration.

  Enable Legacy Support.

  Plug the USB key into one of the usb ports.

  Press the F10 key to save the changes and exit.

  Now, press the F9 key to select the first boot option.

  You should see the USB key as one of the options if it is in fact a bootable flash drive.

• How to boot from the flash drive which has xp to install an OS?

  Boot from the flash drive

  How to start from the flash drive which has xp to install an OS

  the system's model of netbook rlg

  Intel Valérie mgsone

  How to install Windows XP on a Netbook using a USB flash drive
  http://www.TechSpot.com/VB/topic160906.html

  J W Stuart: http://www.pagestart.com