How to calculate the width for assets
Hello
I want to have a large image that covers the entire width of a device.
How can I calculate which corresponds to the width I want?
I'll probably have 3 versions, each for one of the 3 DPI settings.
Thank you.
A desktop application is very different from a mobile application. On the desktop, you usually have a threshold of width/height that you know that each monitor will be at least in bulk, for example 800 x 600. Some people design applications for just this minimum resolution and some people create applications that can grow bigger than, but in the end you basically the exact same application on each monitor.
The story is very different on mobile devices. The range of screen size and screen DPIS is much more important and should be taken into account. You have cell phones that are often something like 480 x 800 in portrait orientation, but then also 800 x 480 in landscape orientation. If you really can't design an app that can be only 480 x 480 because it's just not lots of space and all devices will have a ton of valuable space that is not used.
Then put in the form of tablets, which usually have a screen size much more important for the provision of application you have a mobile phone often is not make sense on a tablet. Many applications have a completely different user interface on tablet vs on the phone.
So in the mobile applications you will want to use relative sizing and positioning as much as possible (width/height=100%, top, left, right, down, VerticalLayout/HorizontalLayout, etc.), you'll want to learn more about the options you have available in the Flex SDK kit to treat the different PPP (dpi scaling and CSS media questions), and you also need to think if your application needs to act even on shelves as on mobile phones or if the interface User should be completely different.
Tags: Flex
Similar Questions
-
How to calculate the deduction for Initial depreciation for assets?
Hello
I am trying to set up books FA tax to calculate the initial allowance (depreciation) active @ 10% regardless of the date of commissioning.
For example. Year Jan - Dec. -rated Convention's same month. If an asset is added in Dec-2010, it should still depreciate 10% instead of 0.8333333333333333
Pointers would be appreciated.
Thank youFound a way to do it.
-
How to check the expense for assets posted account
Dear,
can someone explain how to verify the account of capital Asset Workbench?You can see the expense in financial investigation 11i account, but you can see in R12 to the account of expenses in respect of assignments.
-
How to calculate the percentage for two columns?
Hello friendsUse the DECODE or CASE structure
-
How to calculate the number of Out_flags for the PIPL?
Hey everybody!
I'm kinda new to After Effects of programming, so I hope I'm not asking an obvious question.
I searched the web and this forum but just could not find a solution to this problem.
Compilation of my plugin works fine, but as soon as I select it from the menu effects I am presented with an incompatibility error.
My question (already in the title): how to calculate the correct number for the global_out_flags pipl?
Thanks in advance,
Markus
If you want the easiest option, just start with the debugger and to break in the General preferences where is defined, or, if you find amusement in the bit and other Boolean arithmetic shift, please do not hesitate to look at the macro
-
How to calculate the second and minisecond for audio landmark
I'm doing a sound synchronization for the clip audio and video in Flash. I found a tutorial on the web, and it seems to work. However, I do not know how to calculate the second and the mini (deuxieme from mp3 file. The first frame has the following lines to set the duration for each animation:
Import class
Import net.quip.sound.SoundSync;
Stop the main timeline
Stop();
Create an instance of SoundSync
var ss:SoundSync = new SoundSync();
ss.addCuePoint ("IT", 20100);
ss.addCuePoint ("admin", 20000);
ss.addCuePoint ("maintenance", 19800);
ss.addCuePoint ("treatment", 16479);
ss.addCuePoint ("engineering", 14598);
as.addCuePoint ("logo_epa_npdes", 12356);
ss.addCuePoint ("construction", 8967);
ss.addCuePoint ("370 mg/j", 7896);
ss.addCuePoint ("mc_650, 000 ', 5439);
ss.addCuePoint ("130 mg/j", 3254);
ss.addCuePoint ("1938", 2439);
ss.addCuePoint ("vintage_mc", 0);
Use the instance of loading external MP3
ss.loadSound ("Scn04 - 05.mp3", true);
Create a listener object for the
cuePoint and onSoundComplete events
var listener: Object = new Object();
listener.cuePoint = function (): Void {}
Play();
}
listener.onSoundComplete = function (): Void {}
Play();
}
ss.addEventListener ("cuePoint", listener);
ss.addEventListener ("onSoundComplete", listener);
and the soundsync.as file as follows:
Import mx.events.EventDispatcher;
Import mx.utils.Delegate;
class net.quip.sound.SoundSync extends its {}
PROPERTIES
private var _cuePoints:Array;
private var _currentCuePoint:Number;
private var _interval:Number;
private var _intervalDuration:Number;
private var _secondOffset:Number;
Event dispatcher
public var dispatchEvent:Function;
public var addEventListener:Function;
private var removeEventListener:Function;
CONSTRUCTOR
public void SoundSync(target:MovieClip) {}
Super (target);
init();
}
METHODS
private function init (): Void {}
Initialize properties
_cuePoints = new Array();
_currentCuePoint = 0;
_intervalDuration = 200;
_secondOffset = 0;
Initialize the instance of the class as the valid event broadcaster
EventDispatcher.initialize (this);
}
Add Cue Point
public void addCuePoint(cuePointName:String,_cuePointTime:Number):Void {}
() _cuePoints.push
{
type: "cuePoint",.
name: cuePointName,.
time: cuePointTime,.
target: this
}
);
_cuePoints.sortOn ("time", Array.NUMERIC);
}
Get cue point
public void getCuePoint(nameOrTime:Object):Object {}
var counter: Number = 0;
While (counter < _cuePoints.length) {}
If (typeof (nameOrTime) == 'string') {}
If (_cuePoints [meter] .name == nameOrTime) {}
return _cuePoints [counter];
}
} Else if (typeof (nameOrTime) == 'number') {}
If (_cuePoints [meter] .time == nameOrTime) {}
return _cuePoints [counter];
}
}
counter ++;
}
Returns a null value.
}
Get the Index of the current Cue Point
private void getCurrentCuePointIndex(cuePoint:Object):Number {}
var counter: Number = 0;
While (counter < _cuePoints.length) {}
If (_cuePoints [meter] .name == cuePoint.name) {}
return the meter;
}
counter ++;
}
Returns a null value.
}
Get the next Cue Point index
private void getNextCuePointIndex(seconds:Number):Number {}
seconds (seconds) =? seconds: 0;
var counter: Number = 0;
While (counter < _cuePoints.length) {}
If (_cuePoints [meter] .time > = seconds * 1000) {}
return the meter;
}
counter ++;
}
Returns a null value.
}
Benchmark deleted
public void removeCuePoint(cuePoint:Object):Void {}
_cuePoints.splice (getCurrentCuePointIndex (cuePoint), 1);
}
Remove all Cue Points
public function removeAll_cuePoints (): Void {}
_cuePoints = new Array();
}
Beginning
public void start(secondOffset:Number,_loops:Number):Void {}
Super.Start (secondOffset, loops);
dispatchEvent ({type: "onStart", target: this});
Reset benchmark
_secondOffset = secondOffset;
_currentCuePoint = getNextCuePointIndex (secondOffset);
Poll for cue points
clearInterval (_interval);
_interval = setInterval (Delegate.create (this, pollCuePoints), _intervalDuration);
}
Load sound
public void loadSound(url:String,_isStreaming:Boolean):Void {}
super.loadSound (url, isStreaming);
clearInterval (_interval);
_interval = setInterval (Delegate.create (this, pollCuePoints), _intervalDuration);
}
Stop
public void stop(linkageID:String):Void {}
If {(linkageID)
Super.Stop (linkageID);
} else {}
Super.Stop ();
}
dispatchEvent ({type: "onStop", target: this});
Kill the ballot
clearInterval (_interval);
}
Survey benchmarks
private function pollCuePoints (): Void {}
If the current position is close to the cue point.
var time: Number = _cuePoints [_currentCuePoint] .time;
var span: Number = (_cuePoints [_currentCuePoint + 1] .time)? _cuePoints [_currentCuePoint + 1] .time: time + _intervalDuration * 2;
If (position > = time & & position < = span) {}
Send event
dispatchEvent (_cuePoints [_currentCuePoint]);
Advance to the next landmark...
If (_currentCuePoint < _cuePoints.length) {}
_currentCuePoint ++;
} else {}
_currentCuePoint = getNextCuePointIndex (_secondOffset);
}
}
}
EVENT HANDLERS
onSoundComplete
public function onSoundComplete (): Void {}
Kill the ballot
clearInterval (_interval);
Reset benchmark
_currentCuePoint = 0;
Send event
dispatchEvent ({type: "onSoundComplete", target: this});
}
}
any help will be greatly appreciated.Wuzhishan,
> Hi Dave, your tutorial is very cute and it is very useful.
Thank you! My daughter is cute. She inherited all of
me, so I have not left. ;)> I'm sorry that I don't have my question clearly.
No worries. :)
> I have listen mp3 in Windows Media Player and try to
> get both for the tail, I found it on the bottom of the
> player time indicates 00:26.I'm with you.
> How can I writer this number in the code? Is it 0026 or 26?
The code expects milliseconds, then 26 seconds would be written as
this:26000
If he said 01:22 (one minute and 22 seconds), you must write it like this:
82000
... which is 60 seconds for now, 22 seconds
side, then multiplied by 1,000 to get milliseconds.David Stiller
Adobe Community Expert
Dev blog, http://www.quip.net/blog/
"Luck is the residue of good design." -
Stupid question, but I cant find it through various research.
How can I calculate the width of the code and relate that back on my sensor units.
If I have a 24 bit ADC with a range of 500mV I get 2.98 mV E-5 steps. How to convert to the engineering units.
Solved the stupid question.
a gain factor for sensor that is (in increments of V/unit)
Then, just multiplied by my calculated voltage code entry.
to get unit/data acquisition engineering bit
=(DAQVoltage range) EU / (bit) *(Sensor Gain)
-
How Illustrator calculates the height of box Em?
I am trying to determine how Illustrator calculates the basic position of the top of the a Point text object bounding box. She seems to be the same distance as an object of text box with the game setting of first base to box Em height line. I just do not know what assets within the scope of the police which matches. Help of the Illustrator defines it as:
"The top of the box em in Asian fonts touches the top of the type object. This option is available regardless of the preference show Asian Options. »
For some fonts, this distance seems to be near the pole of the police, but this is not true for each font. The clues how Illustrator calculates it?
Here you go
var idoc = app.activeDocument; var itext = idoc.selection[0]; var top = itext.position[1]; var base = itext.anchor[1]; alert('Em? size: ' + (top-base));
-
How to calculate the execution time of a SCTL in FPGA VI?
Hello
Can someone guide me that how to calculate the execution time of a SCTL for an iteration in the FPGA VI?
Thank you and best regards,
Rashid
Hello r,.
A SCTL will always run in a beat the clock it has been linked to. So, if you use a 40 MHz clock, this loop will run in 25 ns. If the code cannot complete in that, or if it requires two graduations of the watch to do the calculation, your code does not compile, then you have the guarantee that this will always be how long it takes this piece of code to run.
-
Formula to calculate the SGA for 12 c of OLTP database
Dear Experts,
What is the formula to calculate the SGA for an OLTP database application.
This will surely depends on several variables such as
(1) the maximum number of connections application would have
(2) growth of database
- users connected
- Server connections
- total number of connections
- connection memory
- OS/application memory
Thanks John.
Is below the formula makes no sense?
Why thank me when you don't know what I said:
You will not find a formula.
You formula has nothing to do with the numbers suggested for EBS, which could (only "might") be a reasonable starting point. You have not given any indication of how you arrive at these figures. You just apply that 80% of the RAM formula suggested by Mr. Faruq? If so, you might want to ask him how he justifies the algorithm.
One point, that you should study management PGA. Your formula assumes that all connected sessions required 30 MB of RAM, all the time. How can you come to this conclusion? On your development system, you can observe how PGA is necessary for the optimal performance of your queries. Then you can ask "how many sessions is actually running a query at the same time?", adds on the non-negotiable PGA by session and calculate the requirement on the PGA TOUR as a result. You should also think about what you call ""memory connection ' and what you call 'PGA Pool'. " These aren't words that I know.
-
How to calculate the CPU Ready on Cluster DRS via Powercli?
Hi all!
I have a DRS Vsphere cluster. I want to know what is the value of the loan of CPU I have in my group.
For example, I get 20% of powercli value, it is normal for the cluster, but if I have 100% or more, I have a problem.
How to achieve via Powercli? And how to calculate the percentage values correctly?
I know, I can get all values of CPU Ready of VMs cluster, but IT is not the same thing, I need overall value of CPU Ready.
Thanks in advance!
As far as I know you can get the cpu.ready.summation for ESXi nodes or VMs.
For a cluster, you will need to get the value of each node in the cluster ESXi and then take the average.
The metric cpu.radey.summation is expressed in milliseconds.
To get a percentage, you need to calculate the percentage of loan period during the interval during which it was measured.
Something like this (this will give the loan current %)
$clusterName = "mycluster.
$stat = "cpu.ready.summation".
$esx = get-Cluster-name $clusterName | Get-VMHost
$stats = get-Stat-entity $esx - Stat $stat - Realtime - MaxSamples 1 - forum «»
$readyAvg = $stats | Measure-object-property - average value. Select - ExpandProperty average
$readyPerc = $readyAvg / ($stats [0].) IntervalSecs * 1000)
Write-Output "Cluster $($clusterName) - CPU % loan $(' {0:p}'-f $readyPerc).
-
How to increase the width of the form in the forms of oracle Designer
Hey friends, I googled many times but could not find a solution for my problem. As you can see this link below, you will see screenshot of my form.
https://community.Oracle.com/docs/doc-887527
As you can see my form width is too small and there are a lot of empty space on my browser window. Can you please help me and tell how to increase the width of the entire form.
Thank you
In the formsweb.cfg, set the parameters width and height accordingly.
-
How to calculate the size of a VMFS volume?
Creating a new partitiontable after ESXi 4 wiped empty was pretty easy with fdisk.
These days with partedUtil and ESXi 5 is not so trivial.Consider that we have a disk/Lun, which looks like this
~ # partedUtil get /vmfs/devices/disks/mpx.vmhba1:C0:T4:L0
93990 255 63 1509949440and suggests that the original - now messed the Volume was created with ESXi 5.
How to calculate the value of the end in the sector so that I can recreate the VMFS partition like this:partedUtil setptbl ' / vmfs/devices/disks/mpx.vmhba1:C0:T4:L0 ' TPG '1-2048 ? '. AA31E02A400F11DB9590000C2911D1B8 0 "
In this case, the correct value is 1509949349, but how do I calculate if I don't know the correct value?Hello
the output of the command "partedUtil get /vmfs/devices/disks/mpx.vmhba1:C0:T4:L0" will be useful in your case, it's "93990 255 63 1509949440".
gives us the values for C/H/S (cylinder/head/sector).
A VMFS volume partition must end on the limit of a cylinder, so selecting the last sector of the partition table should be done using the formula endSector = (C * H * S - 1).
who is '1509949440-1' = 1509949349.
Concerning
(Ref: http://www.virtuallyghetto.com/2011/07/how-to-format-and-create-vmfs-volume.html)
-
How to calculate the number of days/weeks/months between 2 dates?
Hello
I would like to know how to calculate the number of days/weeks/months between 2 dates in OBIEE 11 g, for example, I have 26/05/2013 and 19/05/2013, then I want to get 7 days.
Thank you!
JamieHi Jamie,
Through this links...
http://www.bravesoft.com/blog/?p=682
http://twobiee.blogspot.in/2012/01/working-with-date-differences.htmlMark as correct it allows u...
Thank you... -
How to calculate the size of HFM Cube in SQL Server 2005
Hello
How to calculate the size of the HFM Cube in SQL Server2005
Under application used to Oracle. So what's application to SQL Server?
***********************************************************************************************************
SQL > select sum(bytes/1024/1024) from dba_segments where nom_segment like 'FINANCIAL_ %' and owner = 'HFM;
SUM(BYTES/1024/1024)
SQL > select sum(bytes/1024/1024) from dba_segments where nom_segment like FINANCIAL% HSV' and owner = 'HFM;
SUM(BYTES/1024/1024)
**********************************************************************************************************
Concerning
SmileeWhat is your goal? The subcube in HFM is a concept that applies to application layer - not so much to the database layer. The size of the subcube is the unique number of sheets (data values for January - December inclusive, for example) for the given entity, a triplet of currency or node Parent.Child. Should be considered for accounts of parent and customs that do not exist in the database, but are calculated in the RAM of the application layer.
So if your goal is to find the largest subcubes, you could do this by querying the database and by counting the number of records per entity value (tables DCE) or combination of entity parent.child (tables of the DCN). I am not versed in SQL, but I think the script below you would just the size of the pattern and not the sizes of subcube.
See Accelatis.com for a third party software product that can do it for you. The function is called the subcube Analyzer and was written by the same team that wrote HFM, then they should know how :-)
-chris
Maybe you are looking for
-
Help me, please. Its always like that. I don't know what to do. After the they do not give a solution for this. Please help me Skype. Thank you
-
calendar of implementation pilot
I'm still waiting for the scanner to my officejet 4355 driver & waiting is irritating. HP will come out a timetable for implementing pilot? so that we won't have to keep wondering.
-
My viurus (AVG free edition) software, constantly appears "blocked threat, Exploit * scam" and gives the following description: C:\Program Files (x 86) \MSN\MSN Coire Files\MSN.exe Process ID 5376 Can someone help? They want $129.00 to remove, too mu
-
is not completely going into hibernation, but can not be stopped
-
Play .avi with Windows Media Player files
Try to play the .avi with Windows Media Player