How to check using file space

Similar Questions

• How to check the file for the virtual machine size Esxi shell

  Anyone who can tell me how to check the file for the virtual machine size Esxi Shell. I tried this command-h ls but does not work.

  Have you checked "ls-lh', it will provide information as the attached screenshot." "

• How to check the files of Microsoft to be legitimate?

  I have a Compaq Presario desktop computer comes with XP Media Center 2005.  It has been updated to SP3.

  Recently, I ran free TDSSKiller from Kaspersky Lab to check my PC for the DNSChanger Malware.  After executing TDSSKiller, he registered 6 files to be suspicious. Two are Microsoft files. The files and their paths are:

  (1) mhn.dll.  Path: C:\WINDOWS\System32\mhn.dll

  (2) mhndrv.sys.  Path: C:\WINDOWS\System32\DRIVERS\mhndrv.sys

  How to check that these files have not been modified by a virus?

  Thanks, Terry

  Scan the files with your antivirus application (which is...?)

  You can also download on Virus Total, as long as the file size is less than 32 MB.

  Total virus scan files downloaded with about 39 different tools antivirus and you provides reports:

  https://www.VirusTotal.com/about/credits/
  https://www.VirusTotal.com/about/
  https://www.VirusTotal.com/FAQ/

• How to check using unit tests

  Hello

  How can we test using ASMocking unit if an event is called and the next screen is displayed

  I use tools

  ASMOCK

  FlexUnit 4

  Praveen,

  A few questions. First of all, it is a forum of FlexUnit, so I don't know how to help you with questions of ASMock. You can certainly post here, but I don't know that you will get a response. You will probably need to reach out in an ASMock forum or site to help.

  Second, I'm not sure that FlexUnit is the right tool for you. It is a framework, which means testing a single unit... usually a class isolated both unit tests. If you want to see that when an event is dispatched a new screen, you see dozens to hundreds of classes depending on whether your project is ActionScript or Flex-based.

  If this is the type of test you want just be sure that you really want to try to do this in a framework of unit tests. It will be much more difficult and probably not meet your needs as well. If you need other tests to that high of a level, I would consider more than one tool of functional such as FlexMonkey or many tests

  Mike

• How to check a file suspect .docm

  Hello world

  I opened recently, stupidly, a spam message (which seemed very authentic).

  He had an attached file: OrderConfirmation.docm

  He opened a blank document in Pages.

  I have removed from the file and send it, but worried that some malware (recorder keystroke etc?) perhaps installed the file macro enabled without my knowledge?

  In any case, I say? I always assumed that this malicious program could not be installed without system Admin password, but maybe these macros did something nasty backstage? Or maybe because it was in the Pages, perhaps they have not been activated at all?

  Thank you

  Adam

  Since Pages don't support any, probably nothing to worry about, MS Word macros.

• [AS] [CS5] How to check if a book file has missing documents?

  Hello

  Does anyone know how to check a file to Active Directory for missing documents using Applescript?

  Thanx

  John

  Hello

  I have not been able to access all of the properties of the content of a book like the book State, but I can get the "full name" of each one, the content of the book. As is the full path of the file to where InDesign thinks is the file, you can try to make an alias, if the file is not there it will fail. If you use a try you can take the file paths failed.

  Tell application "Adobe InDesign CS3"

  Set missingBookFiles to {}

  Repeat with x 1 as the content of the book of book 1

  value bookPath full name of book content x of volume 1

  Try

  bookPath bookPath as an alias value

  in case of error

  Copy bookPath at the end of missingBookFiles

  try to end

  end repeat

  tell the end

  return missingBookFiles

  I hope it's useful.

  Gareth

• How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?

  How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?)

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  There is no practical way to do it.

  If you do not enable iCloud Drive on your Mac, you can upload files to iCloud by car via the web interface at https://www.icloud.com

  But you can access the files from the web interface and won't icloud drive as drive in the Finder.  You cannot use the Finder to access the files. You need to download it to use.

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning

• How to check disk space total used by virtual machine

  Dear team,

  I rec was a demand of the customer, he ask us to share the total disk space used by a virtual machine. I don't have any credentials to the total used space of control to verify. Is there a way I can check the disk space total used by the virtual machine offline.

  Note: we have implemented a virtual machine with the thin disk.

  concerning

  Mr. Vmware

  When you say that you have no credentials, I guess that this is designed for the guests, rather than to the ESXi hosts/vCenter Server operating systems! You can see the disk space used in the data store browser, executing CLI ls-lisa or by using a tool like RVTools third 3rd.

  André

• How can I free up space on my C drive without dumping files I need to power my computer? Windows XP 2002

  How can I free up space on my C drive without dumping files I need to power my computer? I have currently 40,4 GB used and I don't know how or what is out there that I don't need? I have a backup of system restore that takes a lot of space, but Im saying that I can not remove it by a pop-up box that says access denied even though I have since transferred it on my external backup hard drive. Can someone please help? Thank you

  {You can remove C:\{folder-name with lots of letters and numbers like this: 2b4892ncf73d63db37db37}------(these files are temporary and have been created by installers)
  C:\Temp
  C:\Documents and Settings\\temp
  C:\Documents andSettings\Temp Settings\
  C:\Documents and Settings\\Local Settings\Temporary Internet Files\ (all the folders inside this folder)

  To remove manually restore points, you will need to login to safe mode and change the permissions in the Security tab of the restore point. However, I do not recommend this.

  Read this article on how to remove safely restore points:
  http://support.Microsoft.com/kb/555367

  If your computer is slow too, I can check for you and let you know what you have running, you know not everything in the background with a newspaper.

  -Alex

• How to check the space on the asm and raw device?

  Hi all
  
  I want to know how to check the space on the device of the DSO.
  We use a feature of the asm, which is on a raw partition.
  Our archive is full. I need to check the space on asm archve partiotion.
  How can I check the destination space archive?
  We are using partition raw device for crs and voting system.
  How can we check the space on the raw device and how do know us which device is currently in use and are not in service
  
  Thanks in advance

  4 - 5 raw partitions...
  What version of oracle?
  Install the OCR + VOTE in gross unit better than OCFS2. If you use 10g to 11 GR 1 material.

  If use 11 GR 2, take the OCR + VOTE in ASM disk group.

  You can check what raw OCR device:
  $ ocrcheck

  VOTEDISK:
  $ crsctl query css votedisk

  On 10g if using the raw device for OCR + votedisk: recommend 1 file = 250M
  11g recommend 1 file = 512M

  Good luck

• How to check my use (data size) of Oracle XE?

  The maximum is 4G, right? How will I know how much there is to the left of sqlplus? Thank you very much!
  
  Also, if I use the space, can I backup my DB and empty for later use?

  Here are a few queries dictionary to find the space used and who owns the blocks...

  select a.tablespace_name ts, a.file_id,
  sum(b.bytes)/count(*) bytes,
  sum(b.bytes)/count(*) - sum(a.bytes) used,
  sum(a.bytes) free,
  nvl(100-(sum(nvl(a.bytes,0))/(sum(nvl(b.bytes,0))/count(*)))*100,0) pct_used
  from sys.dba_free_space a, sys.dba_data_files b
  where a.tablespace_name = b.tablespace_name and a.file_id = b.file_id
   and a.tablespace_name not in ('SYSTEM', 'SYSAUX','UNDOTBS')
  group by a.tablespace_name, a.file_id
  order by 1
  

  System, sysaux cancellation are not supposed to count towards 4G. To display totals by schema...

  select OWNER, TABLESPACE_NAME, sum( BYTES ) from dba_segments
   where tablespace_name not in ('SYSTEM', 'SYSAUX','UNDOTBS')
  group by OWNER, TABLESPACE_NAME;
  

  If you are bumping into the limit of 4G and you decide one of these owners can be trashed, which will certainly free up space.

  drop user [username] cascade;
  

  Check the export and datapump utilities docs, save a username is to do an OWNER = user name of dump or simply close the database and make a backup of data files some safe place.

• How to move a file to the rear using the Terminal

  Hello world

  I just recently started to learn how to use the terminal in OS X I learned how to move files from one directory to another, but I don't know how to move a file back again. Here is an example:

  (I'm already in the Desktop directory) In my office, I have a folder named "music" and a file called "algo.rtf". In order to move the "algo.rtf" file in the "music" folder, I type the following command: "musica algo.rtf mv / '. That works perfectly fine, when I check, the file is now in the new folder.

  But what happens if I want to move the file "algo.rtf" which is now in "musica" on the desktop? I can't understand. I tried the following:

  'cd musica' (so now I'm in the folder where the file is) and from there I typed: "mv algo.rtf Desktop /" (but then it is said; no such directory not found)

  I understand that he says no "found" because it is looking for a folder named "Desktop" in the folder named "music" and this is why it does not work.

  But that still doesn't help me much because I still don't know how to bring it back to "Desktop". If anyone knows how to do this, I would be very happy for your response!

  Thank you.

  Use:

  MV algo.rtf...

  (140623)

• How can I move files to memory stick using Vista

  Can anyone throw any light on my new problem.

  I use Windows Vista Home on my Toshiba Satellite 350 and I'm trying to save a file on memory stick.
  I find the right file and click on 'send to removable disk '.

  I then get an "Item not found" box that contains the message, "

  "Could not find this point, this point is no longer in C:\Users\Desktop.
  "I (or any place seeking) check the location of the elements, and then try again.
  I checked the site and I have the right pair.

  I tried several times with different types of files/places and I get a similar message whenever I try to move the file to anywhere, not only the memory stick

  I tried dragging the files to the box and get the same message, copy and paste do not work I still get the same message?

  Anything I'm doing wrong?

  Are you kidding me?
  You n t know how copy/move the files on the other machine?

  You must mark the file, and then press CTRL + X (shortened for CUP) then go on the memory stick and open it. Press CTRL + V (paste).

  All that s!

• How to check the amount of memory used during execution of the program to save data in the table?

  Hi any idea how to read or check use all memory space by accumulating the table with the data?

  My program works like this: -.

  (1) values are acquired and displayed on the table

  (2) the values are acquireduring the next event and appear in the next row in the table.

  (3) and this continues...

  Please notify

  Thanks in advance

  Hi astroboy,.

  You can use 'Flatten channel' to get the size of your data.

  Mike