How to close a form in script

Similar Questions

• How to close a form automatically if it is idle for a minute?

  We are talking about 10 forms here. We want to do this: we have a forms applications. Open a form in the menu and the user uses. Now, if the user does not use the form for 1 minute, i.e. If the form is idle for one minute without keyboard or mouse activity we want to give a message to the use and close the form or to block/gel form.
  
  How do this pls?

  The only way to support to do would be to create a java bean that monitors the activity of the client. Demonstration of how to do this is available on the forms download page:

  http://www.Oracle.com/technetwork/developer-tools/forms/downloads/index.html

  Search: "timeout Java Bean". Remember that this is only an exampleof _____. To use this example in your production application, it may be necessary to adapt the java code to meet your needs. This example is not supported by the Support of Oracle. Use it at your own risk.

  You will probably get suggestions to set FORMS_TIMEOUT to a value less than the PULSATION. It is strongly discouraged because it can cause unpredictable results and let the end user with a comparing browser hanging. Again, using a java bean is the preferred method.

• How to 'Close' included form

  Hi, I have attached a few forms of comic bubble which have "tails" on them (the pointy part little you put near the mouth of people who speak the dialogue). I would like to remove these cocks and close the shape so that it is symmetric (as if the tail has never existed). How would I go to do this?

  

  

  Thank you.

  Then do this

  

• How to close a form image drawn to create a clipping mask?

  Hi friends,

  I hand - drew a skirt, took a picture of my design and trace the image to create a vector of my image.  I now use the clipping mask to fill my skirt with a pattern of drawing. See my skirt of drawing and model below.

  

  The only problem is that my drawing is not closed.  In the upper left corner of the skirt, there is this opening in the drawing (detail shot below).  What is the best way to bridge that gap, so I can use the image as a clipping mask?

  Thank you!

  

  Use the shapebuilder tool to fill the inside of the skirt with a color (any color)

  To close the gap, first double-click the tool in the tools Panel to enable detection of space.

  The colorful filling can be used as a clipping mask.

• How to create a form of free paths using script?

  Hello

  I want to create a form in which I add multiple points

  I try to use GraphicLine, but it adds no way point in this

  var myGraphicLine = myPage.graphicLines.add ();

  myGraphicLine.paths.item (0).pathPoints.item (0) .anchor = [72, 72];

  myGraphicLine.paths.item (0).pathPoints.item (1) .anchor = [72, 144];

  myGraphicLine.paths.add ();

  myGraphicLine.paths.item (1).pathPoints.item (0) .anchor = [72, 144];

  myGraphicLine.paths.item (1).pathPoints.item (1) .anchor = [90, 100];

  myGraphicLine.paths.add ();

  myGraphicLine.paths.item (1).pathPoints.item (0) .anchor = [90, 100];

  myGraphicLine.paths.item (1).pathPoints.item (1) .anchor = [110, 144];

  myGraphicLine.paths.add ();

  myGraphicLine.paths.item (1).pathPoints.item (0) .anchor = [110, 144];

  myGraphicLine.paths.item (1).pathPoints.item (1) .anchor = [144, 72];

  I want to create a W shape using script type.

  How to create a form of type free paths (like those drawn with pencil or pen tools) using js?

  
  

  Thank you

  This is because you create separate ways. Create just a first, and then add all the pathpoints.

  Do not forget that all first path you create comes with free first 2 points, so just move these in the position as shown above. Then add the new points to the same path, rather than create new ones (lines #4, #8, and #12 in my example).

• How to remove the Save dialog box before you close the form?

  Hi all

  I've created a form that will open a data connection to a button click.

  I get the error on failure and the code to close my form of app.execMenuItem ("Close");

  but a save dialog box appears before I can close.

  (maybe because I did something on the opening form),

  It is able to remove it? Or simply impossible?

  Best rgds.

  Hmmm,

  What happens if you add?

  Event.Target.Dirty = false;

  app.execMenuItem ("Close");

• How to close the window of IE on exit_form

  Hello
  
  Is it possible to close the Internet Explorer window on exit_form?
  
  Thank you

  How do I close the browser that started a Session of forms [865745.1 ID]
  ________________________________________
  Updated August 11, 2009 Type HOWTO PUBLISHED status
  In this Document
  Goal
  Solution
  Directions for use:
  Manual steps required for FireFox:
  References
  ________________________________________
  Applies to:
  Oracle Forms - Version: 10.1.2.2.0 to 11.1
  Information in this document applies to any platform.
  Goal
  This document will describe how to close the browser window (without confirmation of the user) who was responsible for starting a session of forms.
  IMPORTANT:
  The sample program in this article is provided for educational purposes only and is NOT supported by Oracle Support Services. It has been tested internally, however and works as described. We do not guarantee it will work for you, so be sure to test it in your environment before relying on it.
  The code in this document uses Java Scripting to achieve his goal. If the client computer does not have Java script active or is blocked, this code will not work correctly. In addition, although this document was written as it applies to Oracle Forms, the functionality of the browser and how Java Script responds that it contains, is not related to the product forms. If, for some reason this code does not work for you, the problem is probably the result of changes (for example, updates) made by the supplier of the browser, or a client configuration that prevents the correct execution of the Java Script code. These problems are not related to the Oracle product and you should refer to the manuals of browser or Java script repository to debug the problem.
  This code has been successfully tested with Oracle Forms 10.1.2.3 using Internet Explorer 7 and Firefox 3.0. Be aware that FF3 is not currently certified for use with Forms 10.1.2.3 or more. Other versions may or may not work for the aforementioned reasons.
  Solution
  Directions for use:
  1. using an html editor or text, create a file html with the following code:
  
  
  
  
  
  
  
  

  Your browser or system settings prevented this window to close.

  
  

  To ensure the highest level of security,

  
  

  Please close/quit immediately this browser session.

  
  
  

  2. save the html with the following name: close.htm
  3 store this file on the middle tier in a directory that has an associated virtual path configured on the HTTP server. You can use an existing path or create a new. For example, in the version 10.1.2 you can copy the html file to this directory:
  ORACLE_HOME\tools\web\html
  Practically, the above corresponds to the following by default:
  genres/html /.
  For more information about creating a virtual path to the HTTP server, refer to the HTTP Server Administrator's Guide.
  4. in the Forms application, choose the desired relaxation, where you want to run the browser is closed. Don't forget that by executing this code, the application will be suddenly terminated, therefore, it is recommended that the following code only appear in the trigger of FORM post forms.
  Web.show_document ('/ forms/html/close.htm','_self');
  5. compile and run the form.
  Out of the form, the browser calls close.htm, resulting in the closing of the browser.
  This has been tested successfully using IE7 on XP - SP3. While this code works with other browsers, for example, FireFox 3, a change of configuration in FF are needed to make it work properly.
  Manual steps required for FireFox:
  1. open an instance of the FireFox browser.
  2. in the address bar, enter the following command and press enter on the keyboard:
  Subject: config
  3. in the list presented, locate the following setting:
  DOM.allow_scripts_to_close_windows
  4. double-click on this setting to set its value to TRUE
  5. exit the browser

  References
  http://msmvps.com/blogs/paulomorgado/archive/2007/11/02/how-to-close-browser-Windows-in-Windows-Internet-Explorer-7.aspx

• How to close the popup window after executing PL/SQL?

  Hello

  To see a junior question: we use APEX 5.0.2

  On a page of the modal dialog (of an interactive report), for the button create, I created a dynamic action that runs the specific code from PL/SQL to insert a new item.  Then behind the insert clause, I have the code to close the pop-up window, so that it executes successfully the insert clause without closing the window.  Please let me know what I can do.  Thank you.

  HTP.p ("< script > '");

  HTP.p ('window.opener.Location.Reload ();) Window.Close ();') ;

  HTP.p ("< /script >" ");

  Kind regards

  Jian

  OK, thanks for all your help and ideas. Finally, I gave up running JavaScript, instead, I created another dynamic action that closes the dialog box with a later sequence (for example, it runs after the PL/SQL code).  Now, it closes the windows properly after running pl/sql clause.  Although I still wonder how to run JavaScript because it doesn't do anything, even when I create a process to run javascript directly.

• How to run multiple parallel sql scripts?

  I try to execute multiple sql scripts parallel to the short run of the process via sqlplus. Are there opportunities to do? LINUX ORACLE 5. XX

  I do it too via Scheduler, but now I need to do this via sqlplus or shell + sqlplus?

  How do I start using shell script several xterminals and ech session begins all the sql scripts?

  nohup./SQL1.sh &

  nohup./sql2.sh &

  nohup./SQL3.sh &

  The '&' causes the script1.sh to run in the background so that the command prompt is returned immediately.  This means that sql2.sh can start immediately and at the same time as sql1.sh.  It doesn't have to wait for sql1.sh.   This assumes that there are no dependencies between scripts!  This meets your need to run scripts in parallel.

  The nohup untie your shell script.  So, even if you disconnect, the script continues to run.  Without the nohup, if you were to close your session before the end of the scripts running, they would get fired.

  Hemant K Collette

• How to close all the worksheets at once

  Hello

  How to close all the worksheets at the same time (with one click)?

  It of so annoying to close one by one and asked if you want to save the script or not.

  Thank you

  Have you tried right-clicking on the name of the tab and selecting 'Close All '?

• How to close the scene?

  Hi how to close the scene? The doc says that

   stage.close()

  just mask the window but still exist in memory and frees resources. Y at - it something like

   JFrame.dispose()

  My requirement is first I'll show the step that displays a login form. Once the user s in successfully login I have to close it and open another window that contains information specific to the user. So, what might be the best approach?

  Instead of using the many steps I suggest to use only a step and many scenes.
  Here are some examples:
  Re: How to change several scenes?
  https://blogs.Oracle.com/acaicedo/entry/managing_multiple_screens_in_javafx1

• How to create a form that requires thousands of boxes?

  Hello forum members

  I have Adobe Acrobat 8 Professional.  I searched the internet and forums for the last few hours and I can't seem to find information on how to create a form with multiple check boxes.  I don't want to give individual names to thousands of boxes.  I am hoping there is a simple solution to my problem.  Maybe don't even need to use checkboxes.

  Here it is...

  I'm a DJ and the wedding season is coming.  For every wedding that I do, I usually give the bride and groom a list of my songs and they choose a bunch of songs they would like to have at their reception.  In the past, I've just been sent word to Web page with songs and they would send me their selections in another document or directly in the email response.  I want to make this process easy for them (and me) in a pdf document where they can simply place a check mark next to the songs they want and then send it to me.  Premium (if possible) I would like to be able to export the songs they have selected in a separate document so that I don't have to go through the full pdf (with thousands and thousands of songs) when they send it to me.

  I would be forever grateful if someone help me or direct me to a link with additional information.

  Thanks in advance,

  Mike

  Probably the best thing to do is to have Acrobat automatically adds checkboxes for you. It would take to add a box character by using a font such as Wingdings next to each song title. When you select "forms > run form field recognition", it detects each box on every page and add the checkbox fields.

  You need to activate the reader of the document (Advanced > user rights enable in Adobe Reader) so that users can save the completed form.

  Once you receive it back, you can run a script to create a list of selected songs. Exactly how do you it depends on indications of the final form that you create.

• How to check my form for changes not

  How can I check my form for changes to stop? My form can have one or more blocks of data and I want to detect if the changes are waiting when they try to close the form. They can exit by pressing a button on my form, or X'ing out all together. I need to know if the changes are underway so that I can handle this myself.
  
  Thanks in advance for the help.

  Hello

  If :SYSTEM.FORM_STATUS = 'CHANGED' Then
    -- something to commit
  End if ;
  

  François

• How to close a popup by backing bean?

  How to close a popup by backing bean?

  StringBuilder script = new StringBuilder();
          FacesContext context =  FacesContext.getCurrentInstance();
                    script.append("var popup = AdfPage.PAGE.findComponent('").append().append("'); ")
                          .append("if (popup.isPopupVisible()) { ")
                          .append("popup.hide();}");
                    ExtendedRenderKitService erks =
                      Service.getService(context.getRenderKit(), ExtendedRenderKitService.class);
                      erks.addScript(context, script.toString());
  

• May not know how to create a form of update in a cfwindow tag

  I was finally able to figure out how to make a form for adding inside a cfwindow yesterday. But I want this form to be versatile and thus allow changes. But for the life of me, I can't understand how to move a row of data to the form inside a cfwindow. Normally, I'd spend the primary key through the URL, but if I'm trying to do here, basically it reloads the page and close the cfwindow since I have the window does not display by default value.
  
  My page has a list of departments. My page is called departments.cfm. For each line in the list of departments, there is a link called edit. When the user clicks on this link, I want the cfwindow to open with the completed form with the data of the list of counties for the selected line. It sounds pretty simple, except how pass the department_id to the form? If my link is < a href = "departments.cfm? id = #department_id # > Edit < /a >, displays of cfwindow tag and I can see the data in it, but then closes immediately." I finally understood that he called the page again and the cfwindow closes because I did not display by default. I'm about to drop this cfwindow and just make real via javascript popup windows. And I'm normally not in favor of making the pop-up windows, but the application I'm working on that does not have enough real estate on the screen to make a hidden form, a separate window that contains the form is my best solution.
  
  Someone at - it suggestions?
  
  

  Thanks Peter,.

  It worked!