How to combine the large number of tables of pair key / value in a single table?

Similar Questions

• How to add the large number of RoboHelp docs to SharePoint version control

  I'm on RH11 and some versions of SharePoint, which I'm not sure. I am able to add a document to both HR SharePoint Versioning (file > Version control), but I must have about 49 000 with version control in RoboHelp.  I was able to get the files in SharePoint, but now I have to get RoboHelp to be managing the large number of files.

  How can I get RoboHelp to give version control a large number of documents at a time?

  Are - you're talking about individual files or projects? I guess that the individual, since 49 000 project files can be a bit heavy.

  If you add a project to version control, RoboHelp will add all the files in SharePoint. This will take a little time (set HR to add it before you go out for lunch or before going home). At the end of the day, you can check in the entire project in a single click. Or you see something else?

  You can still manipulate the files .apj of HR to very quickly add loads of files to a project. If you have files in SharePoint, you can update the FPJ files (use the following script: missing subject Fixer). Then remove the CPD and start the project.

• How to recover the large number of columns for all items at once

  I have a table (T1) with a large number of columns (50). I am building a page on which I would like to consolidate these columns in some regions:
  
  Region: has
  Items i1 - i10
  
  Region: B
  I11 - i20 items
  
  Region: C
  I21 elements - i30
  …
  Etc.
  
  The majority of the articles on this page are extracted from the same table (T1). So far, the type of each source element has the value SQL query and each item has the motion of the source is defined as:
  
  SELECT column1 FROM t1 WHERE t1id =: global_item
  
  What is the best practical approach to retrieve values for all items on this page? Is there a way to retrieve all the columns point at the same time, something like:
  
  SELECT column1, Column2, Column3, column50 FROM t1 WHERE t1id is: global_item
  
  Instead of:
  
  I1 point source:
  SELECT column1 FROM t1 WHERE t1id =: global_item
  
  Point source i2:
  SELECT Column2 FROM t1 WHERE t1id =: global_item
  
  Point i3 source:
  Column3 SELECT FROM t1 WHERE t1id =: global_item
  …
  Item i50 source:
  SELECT column50 FROM t1 WHERE t1id =: global_item
  
  For each item on this page, when they are displayed?
  
  Thank you for your time.
  
  Daniel

  Set the source of static assignment type item and delete individual values of source of SQL query. Create a process before the header PL/SQL along the lines of

  begin
  
    select
              column1
            , column2
            , column3
              ...
            , column50
    into
              :i1
            , :i2
            , :i3
              ...
            , :i50
    from
              t1
    where
              t1id = :global_item;
  
  end;
  

  OR

  Create an automated process line go through the wizard for the table T1, then set the Source Type of the database column and the source values for each item in the name of the corresponding column in the T1.

• How to combine a large number of jpeg images in a single pdf file

  I have over 200 JPEGs that I want to convert a single pdf file.

  How can I do?

  What should I buy?

  THA

  You can combine the files with Adobe Acrobat.

• How to include the total number of table one fact in another fact table to calculate the percentage

  I have a fact table in the grain of each document created in any organization, say the 1st table of facts. I have another table of facts (2nd fact table) seen those documents which are considered by different commentators. grain of this second fact table is so each review, even if I document in both IDs the fact table.

  Now, I want to calculate the percentage return documents reviewed. For this I need to divide count separate from the document of performance by the total performance document. Now this document of total performance can be obtained from the 1st table of facts, but I don't get how to bring this indictment in the 2nd table of facts to show the percentage.

  Please let me know if there is no ambiguity in my question, because I'm a starter in OBIEE.

  Thank you very much.

  then you can set new logical column with two columns of fact in the formula

• How to manage the large number

  I'm trying to implement portfolio cmdlet, I want credit 1000 for it that I'm passing my apdu as
  CLA ins p1 p2 = 2 lc and 03 e8
  1000 = 03 E8
  When I get this in
  apdu.getBuffer ();
  its value is change, e8 here = 232 but here shows different value byte array, because it supports unsigned, nature
  How can I get 232 in variable shorts for E8

  short sth = Util.makeShort (0x00, 0xE8)

• Get a Virus message "the maximum number of secrets that may be stored in a single system has been exceeded.

  How to remove "the maximum number of secrets that may be stored in a single system has been exceeded?

  Download and run malwarebytes... see if that helps

  www.Malwarebytes.org

• How to create a large group of tables of all different lengths

  Hi all

  I want to create a 2D array that has two coloums and X number of rows (possibly in the hundreds). The first coloum must have a calculated average for this line. The second coloum should have a gap with the average assosiated. I struggle to get to this point. I know how to aqquire the set of values that should be considered for each mean and STD and I also know how to calculate the average and std.

  A loop will tell me what is the value of tag and which line in X put in. I want to be able to have the X number of tables each representing a row with values before calculating the avg and std. Each table would be of a different duration.

  I don't know how tag on the unique values of the loop to the appropriate line to create the Group of X tables.

  The only way I can think to do is the initialization of a 2D table large exessvly and replacing the first available null in the row with the value form the loop. Then only, I wouldn't consider zeros when I do the final 2D picture. What I don't love about it, is that it would be exesive and it is possible that there wouldn't be enough zeros for all the values that I wanted to consider in a specific line.

  I do not want to calculate averages and STDS for every line, every time I have add a value from the loop either. That would allow me to pass the table groups but would also slow the program. Can someone give me some advice on how to run this? Thank you in advance!

  MechaCool

  Use a cluster.  In your case, the cluster contains a data table and two digital inputs for the mean and std dev.  Look at the joint.  I created a control of Type Def the type of data I think you want.  In vi, you can see how to use the cluster to write your data.  For multiple series of data, you would have a picture of this cluster.  Each could have an array of different lengths and his averages dev partners and STDS.

• How to combine the different saturation sliders?

  I'm not sure that understand how LR4 combines the overall saturation slider and local adjustments. Two questions in "BOLD" at the bottom.

  I did the following experiments:

  1) begins with an image raw color, version 2012 process, intact.

  (2) bring a lower overall saturation to-100

  (3) add a graduated with a + 100 saturation filter (I added, say, sharpness-100 to see precisely which side the filter is applied)

  I would expect half of the picture to color and a half b & w. Instead, the filter is totally ineffective (that is, it has absolutely no effect, you can see this turning point). So I assume that the total saturation is not "additive" (i.e. - 100 + 100), but perhaps "compound" (i.e. the product of 1 + p/100). If this were true, then any cursor to-100 equal would bring saturation at least. Let's see if this is true:

  (4) set overall saturation to-100. any value for the saturation of the filter is ineffective

  (5) set saturation to-100 and 0 overall saturation filter. now (say) in my photo, the sky is blue on the left and the gray on the right.

  (6) slowly move overall saturation from-50 to + 100: changes in the gray sky. a.... less saturated gray to a sort of... supersaturation in gray (more blilliant and slightly yellow?).

  so, the conjecture is false, and it seems that the filter is applied first, and the overall value is applied last, IGNORING what the filter may be done (so if the blue transformed filter in gray, then "saturate" the gray).

  (A) is - this documented anywhere?

  B) in particular, if I want to do everything except a very small area, Desaturate I have to paint the complement of the area including the saturation - 100 who feels quite natural (I want to do something on the small surface paint). Is there a solution?

  Thank you
  HD

  Yes.

  In addition to the local against the global problem of clipped pixels command, most algorithms have limits, and what happens when adjustments push them these limits depends on the adjustment.

  For example:

  local highlights:

  (assuming that global highlights = 0)

  -50 & -50: same effect as-100

  but

  -50-50 & -50: effect is stronger than-100, but not as strong as-150.

  Why?

  because you're to reach the end of this who-highlights can do, and instead of just stop working completely (and suddenly), the effects of other residents begins to roll-off (large cone). Similarly for the shadows. Highlights/shadows points threshold is 100 - nothing more than that and you get diminishing returns.

  FWIW - that's why the globals for those who are limited to 100 - so there is enough clearance for the inhabitants to have some effect, even if it is as you would expect.

  Also big problems because of the order at the local negative values have a different meaning than positive values.

  One of the most critical, especially if the conversion of photos of 2003 with a local negative sharpening (radical change to negative (local) sharpening) introduced in PV2010:

  Total amount local sharpening > 0 adds to overall (not sure what is happening to the limit max).

  -1 to-50 (partial sharpening total is hidden)

  -50 to-100 (blur)

  Another biggie - local clarity. Since negative local clarity is applied before overall positive clarity (as opposed to being consolidated) and negative clarity works radically different "less positive" clarity, there is a huge difference between the setting of high overall clarity and applying negative clarity (locally) too specified regions, versus applying lower overall clarity and complete within the regions clarified using local clarity with positive values. It is the one that bit me a bunch, but thanks to the issue raised by this thread, there will be no more...

  I really wish that Adobe documents such things, then we'd know since him commenting rather than find out later...

  Rob

• Hi, how to set the maximum number of connections of FMS on the same IP address

  How to set the maximum number of connections of FMS on the same IP address?

  The application.clients object available in action script server-side maintains a list of all clients connected to the Court at this moment here.

  You can browse the table and compare the property Client.ip to determine the max connections from an ip address and therefore accept/reject connections.

  It can be as simple as this in the application.onConnect

  application.onConnect = function (clientObj)

  {

  var totalConnections = 0;

  for (i = 0; i< application.clients.length;="">

  {

  If (application.clients [i] [ip] is clientObj [ip])

  {

  totalConnections ++;

  }

  }

  If (totalConnections > 10)

  this.rejectConnection (clientObj);

  on the other

  this.acceptConnection (clientObj);

  }

  Above the piece of code is untested so you may have to make some changes to make it work, but your solution should look something like this.

• How to use the Type of Oracle Table values in the Select statement.

  Hello
  
  I get the initial set of values in the Table of Type Records of the Oracle and want to use the list of values in the Select statement.
  
  For example, try something like the following:
  
  TYPE t_record () IS RENDERING
  ID TABLEA.ID%type,
  NO TABLEA.NO%type
  
  );
  v_record t_record;
  T_table TYPE IS the v_record TABLE % TYPE;
  v_table t_table;
  
  -Code to fill the values of v_table here.
  
  SELECT ID, NO, COLLECT in BULK IN < some other table variabes here > FROM TABLEA
  WHERE ID IN (i) v_table USER.USER;
  
  I want to know how to use the Type of Oracle Table values in the Select statement.

  Something like this:

  create or replace type t_record as  object (
  id number,
  no number
  )
  /
  
  CREATE or replace type t_table AS TABLE OF t_record;
  /
  
  set serveroutput on
  declare
  
    v_table t_table := t_table();
    v_t1 t_table := t_table();
  
  begin
  
    v_table.extend(1);
    v_table(1).ID := 1;
    v_table(1).No := 10;
  
    v_table.extend(1);
    v_table(2).ID := 2;
    v_table(2).ID := 20;
  
    SELEC t_record (ID,NO) BULK COLLECT INTO v_t1
    from TableA
    FROM TABLEA
    WHERE ID IN (select t.ID from table(v_Table) t);
  
    for i in 1..v_t1.count loop
      dbms_output.put_line(v_t1(i).ID);
      dbms_output.put_line(v_t1(i).No);
    end loop;
  end;
  /
  

  No test!

  P;

  Published by: bluefrog on March 5, 2010 17:08

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• I try to combine a picture of my sister with a picture of a poem next to her. How to combine the two into a single photo?

  Paint or Windows Photo Gallery

  I try to combine a picture of my sister with a picture of a poem beside it, how to combine the two into a single photo?

  If you have the poem recorded in an image format,
  the following freeware can create a side by side
  Panorama.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download IrfanView
  http://MajorGeeks.com/IrfanView_d4253.html
  (filename: iview433_setup.exe)
  (uncheck if you don't want Google Chrome)

  Download plug-ins too...

  IrfanView plugins
  http://MajorGeeks.com/IrfanView_PlugIns_d4908.html
  (filename: irfanview_plugins_433_setup.exe)

  When the program is installed... read more...

  Open IrfanView and go... Image / create the Image of the Panorama...
  (this will open the screen to "Create a panorama image")

  On the screen to "Create a panorama image"... left click on the add images"" button.
  (Displays the 'Open' screen. Now, drill down to the
  the folder that contains your saved Photos of veterinarians.

  Now... click left (highlighted), the two images, you want to join.
  (you can select more than one if you hold down your Ctrl key)
   
  The two images highlight... left click on the button 'open '.
  (Or... you can add the images one at a time... which is always easier)

  Now, go back to the screen "Create the panorama image.
  and the file names of the selected pictures need to be in the
  Field "Input Images.

  Now with the names of two files in 'Images of entry' field...
  You can left click on the button 'create Image '.

  (the positions left and right of these images can be swapped in)
  selection of a file name and using the "mount image" / "Move."
  Images down"buttons...)

  Now you should see a display of the combined image.
  Reach... File / save as...

  Choose a backup location / enter a file name / choose a format...
  On the left, click on the button "Save..."

• How to change the phone number of Simulator

  Hi Experts,

  Please help me on how to change the phone number of blackberry Simulator.

  Thanking you in advance,

  In JDE:

  Edit-> preferences-> Simulator-> network-> phone number

• How to get the maximum number of days in a month?

  How to get the maximum number of days in a month?

  I use a dateField. where I can get the month. Now, I want to get the maximum number of days in a month.

  How can I get it?

  Please help me. and thanks in advance... []

  NET. RIM. Device.API.util
  Class DateTimeUtilities

  getNumberOfDaysInMonth (int month, int year)
  Returns the number of days in the specified month

  It took me like 10 seconds to find it in the API, I guess you spent more time writing the post...