How to compile a cobol file

Similar Questions

• How to recompile the COBOL files?

  Hi all
  
  Can anyone provide some documentation to see how to recompile the COBOL files using Net Express 5.1 in the command prompt?
  
  Thanks in advance.
  
  Thank you and best regards,
  Siva Prasad B

  1. set up two environment variables, PS_HOME and COBROOT, on the computer where you are going to compile COBOL. (This should be your file server or a machine that has access to your file server.) You can do this from a DOS command prompt window.

  Set PS_HOME = C:\hr840
  Set COBROOT = c:\netexpress\base

  2. open a DOS commands prompt window, if you have not already, orders and access
  \Setup.

  3. run CBLBLD. BAT as follows
  cblbld
  where is the drive where the compilation takes place, is the temp
  Directory where the compilation is done

  The CBLBLD. BAT file will create the directory to compile for you, if it does not already exist.

  Novel make sure to include a space between the and parameters; they are treated as two different settings within the CBLBLD. Bat batch program. Also to ensure that you have permission write to and that the compilation process will take place there.

  For example, the following command will have the COBOL source of \src\cbl and the compilation process under c:\temp\compile:
  cblbld c: \temp\compile
  Take note of the information that appears on the screen during the process is running. It provides the location of important files that you need to consider.

• How to compile the package file?

  I have an actionscript file, it has a package name, it locate C:\demo directory, as follows:

  package demo {}

  import flash.display. *;

  ABC/public class extends Sprite {}

  public void ABC() {}

  ......

  }

  }

  }

  Then I compile code like following the command, but it increase suite above error:

  C:\ > mxmlc demo\ABC.as

  C:\sdk\frameworks\flex-config.xml loading configuration file

  C:\demo\ABC. As: Error: a file in a source path must have the same package structure ", as a package of the definition,"demo ".

  Where not right above the command?

  Thank you

  Set the source path, for example

  mxmlc demo\ABC.as -source-path=.
  

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/

• I got 60 frames in my application, how to compile in bar file?

  Of what I got through research, only the work of the command line, but not the export version build in burrito of flash player. But the command line is that what I mean hav to add one by one up to 60? I can put these files in a folder, but inside my code, it would mean that the setImage reference all would HAV to change. Is there a simpler way?

  Hey torres.

  Just do a search for .setImage (" and replace by .setImage (" images / just like that with this one quote. ")") and it should be replaced without problem! Good luck!

• How to compile files of pld using adadmin

  Hello
  How to compile files of pld. I used adadmin several times but want to know hoe to compile the files of the LDP.
  
  
  Sorry, now I don't have time to read many pages. If any what a coulr you please tell me the numbers of navigation, it is appreciated. Sorry again
  Concerning
  Taher

  Hello

  If you give option

  You want to regenerate forms Oracle PL/SQL [Yes] library files? YES

  Concerning

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• How to decompile the *.cod file

  Hello!

  It might look like you a stupid question or kind of odd or even exceptional.

  But the lack of time available to us, I hope that one of you might be able to point me in the right direction.

  However, ist the problem/question I face in fact:

  We have a few files *.cod which one of our developers has written and compiled in cod-files.

  Now, it is not available for all of us and we need to modufy these files - it you just change the hardcoded IP addresses.

  We do not find the binaries, because none of us have access to its local workstation.

  Is there a way to decompile the *.cod file and so, HOW do I doi it?

  Cod files are for the 8110 and the BB Storm!

  I hope you mind or will not be bothered to help me!

  Best regards and many thanks in advance

  ciphercore

  Unfortunately you're practically no chance, the only 'real' decompilers for * .cod are flaky and when they work they spit of bytecode, not Java just so to change an address IP will be more than one test then you might think depending on the size of the application.

  In other words, you want to either try hard to find the person or his computer because otherwise a complete rewrite may be a better idea.

• Compile the JSP files in R12.2.4

  Hello

  How we compile JSP files using the command line. Could you please give me the steps.

  Thank you

  Jeremy

  Just to add my personal experience.

  We tried with bounce apache but have not reflecting the changes but we have seen changes after doing the below.

  -bounce apache (use adapcctl.sh stop)

  -bounce oacore (utilisation./admanagedsrvctl.sh stop managed server name)

  -bounce Association (utilisation./admanagedsrvctl.sh stop managed server name)

  I hope this helps.

  Thank you!

• Simple question: how to export a SWF file?

  Hi, I am quite new to Flex and Flash Builder (having more than ten years of Flash experience tho), I'm on a fast track to learning, and I'm generally unclear as to how to use FB to post projects (in Flash, it's very simple).

  I'm working on my first FB project for a client, and the situation is somewhat unique: I created a new project, however, it is not necessary for the MXML file in this situation, because we have an application server that uses just the product SWF in a Flex remote setting much larger side.  So when I do updates in the local project, I want to just export a new SWF to compile ActionScript class files I created and then upload the SWF file to the remote server for the test.

  Yet, when I try just to launch the project locally (to export a new SWF file), I get errors that I assume are due to inappropriate use of the MXML file (which is usually empty), and it is not relevant the rest ActionScript files (and I did not need to be).

  I have examples of other related projects that have no file MXML at all, when I tried to remove the MXML file, I get an error that says simply: "the file cannot be launched.  And in fact, when I moved the file MXML back, I now get the same error.  It's really hard to know what is happening here.

  I thought about primary control AS file in the Application 'default', but the menu for that option is not allowing me to (grayed out).

  Can someone help me understand what to do here?

  When project-> build automatically is enabled, whenever you make a change to a file that is used by your main Application AS file somehow, the output SWF will be built in the bin-debug folder.

  When project you-> export of output, a quality version of the SWF file will be generated in the bin-release folder.

• to compile multiple indesign files

  Hello

  I need some information.

  How to compile more individual indesign files into one file?

  I added the documents in a new book file but impossible to compile them into a single indesign file.

  Nothing automatic.

  However, you can move pages of one InDesign file to another.

  You don't mention what version of InDesign, you're using.

  CS4, open your source and your documents of desitination.

  With your open source document, go to the side of the page, select move Pages in the Panel menu and set ranging from the page to move, whiich document, and what place in the order of the pages.

  You can do this with master pages as well. If your documents use the Master pages of the same name, but have different content, it would be in your best interest to rename them before moving the pages. Otherwise, be prepared to make changes after you add pages.

• How can you associate VB files in Robohelp 6?

  OS = Windows XP Pro, SP2, Visual Basic 6 Enterprise Edition
  I got am previous post yesday: http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=65 & catid = 447 & threadid = 1189580 & enterthread = y 1 #
  
  I create test help files using Microsoft Compiled HTML Help. Now I have a bunch of files and directories.
  
  How can I connect these files to my VB application? I want to be able to access via the HELP menu or press "F1".
  
  Are there samples or the written description on how to do it? I did a search on "connecting to VB" and came up empty.
  
  Thanks for your help.
  Sam
  

  Hey people, this old man finally got a .chn file and a VB 6 application link. Leon/Rick the documentation context sensitive help has been extremely useful. I must admit, that I created for the tests were very basic; just one or two lines of text with no fancy editing, links, etc. I'm making progress, I'LL BE back.

  Thank you all (Colum/Rick/Leon) for all your help and patience.

  Sam

• How to compile and run a Pro * C under Unix program?

  Hello gurus,
  
  I'm new to the Pro * C. I just wrote a sample Pro * C program 'first.pc' to read some information in tables and print it on the screen.
  I do not know how to compile and run to see the release of my first program.
  
  After searching a lot, I tried following...

  -- Step 1 compile the program into .c program
   
  $->ls -lrt first.pc
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  $->proc first.pc
   
  Pro*C/C++: Release 8.1.7.0.0 - Production on Sat Oct 31 05:43:35 2009
   
  (c) Copyright 2000 Oracle Corporation.  All rights reserved.
   
  System default option values taken from: /oracle/app/oracle/product/8.1.7/precomp/admin/pcscfg.cfg
   
  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  -rw-r--r--    1 sqloper4 staff             0 Oct 31 05:43 first.lis
  -rw-r--r--    1 sqloper4 staff          6648 Oct 31 05:43 first.c
   
  $->
   
  -- Step 2 Generate the .o file
   
  $->cc -I${ORACLE_HOME}/precomp/public -c first.c
  first.c: In function 'main':
  first.c:154: warning: return type of 'main' is not 'int'
   
  $->
   
  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  -rw-r--r--    1 sqloper4 staff             0 Oct 31 05:43 first.lis
  -rw-r--r--    1 sqloper4 staff          6648 Oct 31 05:43 first.c
  -rw-r--r--    1 sqloper4 staff          3709 Oct 31 05:45 first.o
   
  $->
   
  -- Step 3 After that link the .o to libraries and produce the exe
   
  $->cc -o exe_name -L $ORACLE_HOME/lib -lclntsh
  ld: 0711-317 ERROR: Undefined symbol: .main
  ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
  collect2: ld returned 8 exit status
   
  $->
   
  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  -rw-r--r--    1 sqloper4 staff             0 Oct 31 05:43 first.lis
  -rw-r--r--    1 sqloper4 staff          6648 Oct 31 05:43 first.c
  -rw-r--r--    1 sqloper4 staff          3709 Oct 31 05:45 first.o
  $->

  I also tried steps below after some time thanks to the new program

  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  $->
  $->proc first.pc
  
  Pro*C/C++: Release 8.1.7.0.0 - Production on Tue Nov 3 05:42:14 2009
  
  (c) Copyright 2000 Oracle Corporation.  All rights reserved.
  
  System default option values taken from: /oracle/app/oracle/product/8.1.7/precomp/admin/pcscfg.cfg
  
  $->cc first.c
  first.c:142:19: error: sqlca.h: A file or directory in the path name does not exist.
  first.c: In function 'main':
  first.c:170: error: 'sqlca' undeclared (first use in this function)
  first.c:170: error: (Each undeclared identifier is reported only once
  first.c:170: error: for each function it appears in.)
  first.c:154: warning: return type of 'main' is not 'int'
  first.c: In function 'sqlerror':
  first.c:260: error: 'sqlca' undeclared (first use in this function)
  $->

  Can someone help me on above errors?
  
  After all, above yet I don't know how to proceed and "run" the program.
  Could you please help me with the steps 'Compile and run' a Pro * C program?
  
  Oracle DB Version: Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
  OS: Unix
  
  
  Thanks in advance!
  
  Published by: Learning.Oracle on November 3, 2009 17:13

  Hello

  -lsql10

  Which specifies the library to version 10, but it seems that you have your first assignment 8.1.7.

  You will need to look in your lib directory and see what we call the file in 8.1.7 - it's been too long and I don't remember the exact name.

  Kind regards

  Mark

• How can I protect some files of the icloud sharing in the sierra?

  How can I protect certain files from the desktop to icloud and sharing documents in the sierra?  Some of my data is private and I don't want it in the cloud.

  Do not put them in the Documents folder or on the desktop.

• How to open a pps file

  A friend sent me an email with an attachment of dpp, how can I open the file? It has a windows computer, and I think he is using Serif?

  Ask him to send content in a format you can view such as PDF.

  TT2

• How to access the textedit files in Icloud on time machine

  Hi all

  Bad, I need your help! I'm trying to access all my text edit files, which I had saved on ICloud.
  My laptop does not run successfully. I was proposed to restore and re - install the op system. So I run a Machine back up full time and I restored my laptop. I should all have backed up, right?
  Problem is: I'm trying to get all my work on Tex Edit, but I can't find it on Time Machine. Does anyone know how can I recover these files? I have two important years of drafting work there!
  It would be good to have your suggestion.

  Thanks in advance for your help

  Did you you save the files in the correct format - OS X Server: how to modify the configuration files - Apple support?