Memory problem - Split file

Similar Questions

• When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours Unite

  When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours uninstalling a bunch of useless software on my laptop and still photography will not merge the HDR sequence. It worked once before, but now it does not work. Help!

  I just 8 GB of RAM and have been able to put together five separate images HDR images. I compared these files 5-image HDR with files - 2 and 3-image and see improvement very few (if any) using all five. Your results may vary, but you can try to reduce the number of images until you get your new laptop.

• external memory problem E280 v2

  I have a 16 GB external that I threw about half a GB of music on test and it worked well.  Now, I've added about 6 GB of music him and when the player is turned on, it hangs in mode 'update the database.  I searched this forum and found where if you reduce the amount of this help files, so I reduced the amount of files to only 14 with MP3s inside and always a problem.  There are about 1700 total songs on the count of the internal drive unit.  Any help would be appreciated!

  Thanks, I ran the check, but there is a lot of files.  I then deleted large blocks of files/songs until she has refreshed correctly.  I then reduced to a single file that has been performing it and just put that one on the internal memory.  Suffice it to say, he now works correctly.

  Thanks to all who have helped, as knowing that it was a problem of file/song, he started me on the road looking for whoever it was.

• Problem signature__Problem Event Name:_BlueScreen__OS Version:_6.0.6002.2.2.0.768.2__Locale ID:_18441____Files that help describe the problem (some files may no longer be available)__Mini092710-01.dmp__sysdata.xml__Version.txt____

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 18441

  Files helping to describe the problem (some files may be is no longer available)
  Mini092710 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: a
  BCP1: 00373DEA
  BCP2: 00000002
  BCP3: 00000000
  BCP4: 821C2F64
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  http://msdn.Microsoft.com/en-us/library/ff560129%28VS.85%29.aspx

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can look at landfills.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• My data hard drive is about to die, or it is related to a memory problem?

  My windows 7 x 64 operational system joined as well as all my applications is installed in an ssd and there is a hard drive to store data. My system is as follows:

  Motherboard: GIGABYTE GA-X58A-UD3R

  MEMORY: KINGSTON KHX1600C9D3K3/12GX DDR3 12GB (3X4GB) PC12800 1600 MHZ HYPERX GENESIS TRIPLE CHANNEL KIT

  CPU: Intel Core i7 930 (s1366, 2.80 GHz)

  PSU: Enermax MODU87 + 700W 80 + gold PSU EMG700AWT

  HARD drive: Western Digital Caviar Black 1 TB HDD (64 MB of Cache, 7200 RPM, Sata III)

  SATAIII SSD : SSD Samsung 840 PRO Series 265 GB (model MZ-7PD256)

  I rarely have the problem which is depicted in the icons following (I speak for hard drive data storage):

  No preview of the photo, but I can see a specific image when I double click on it

  

  

  records are missing

  

  After this problem, I went to check if the same thing was happening in the icons in the primary system ssd. Therefore, I went to start--> pictures--> sample photos and I could see a glimpse of the images.

  

  I was also able to move through each folder I wanted in the ssd. Then I double clicked on 'computer' icon and the following happened.

  

  I was able to close the window without any problem. I think that it is a hard drive problem, but could also be a memory problem. What is your opinion on that? Another weird thing that happens, is the loading time on a cold start the msconfig.exe file. Sometimes the file loads instantly and other times it takes several seconds (7-10) to load on the screen. If it is not a cold start, then the file always loads instantly. The same thing happens also with the Task Scheduler. It seems very strange to me. Please note that Superfetch, Prefetch, Defrag, Windows backup and indexing are disabled.

  Finally, I found the solution to my problem. When I got a memory low message (12 GB of installed RAM memory) I couldn't believe my eyes.

  

  I immediately opened the resource monitor, went to the memory tab and I just saw the dllhost.exe file has consume all memory. I thought that this file was infected and I checked both versions of them (x 64 & x 86) with virustotal, but it wasn't the issue. When I read that this file system is loaded to restore media files in thumbnail view in windows Explorer, I remembered that I had a defective mp4 file that could not be opened. I knew I had to do. I had to delete this file. The problem is that while you try to remove a defective media file, the dllhost.exe file tries to make it, so you are not able to delete until the end of dllhost.exe through process Explorer process.

  Conclusion: When you see a media file that it is not rendered in the thumbnail, view then this file is probably defective and the dllhost.exe goes to an infinite loop, while he tries to make this file, until it consumes all your RAM memory!

• Microsoft Photo Viewer memory problem / unable to print images... (2 questions)

  The other day I tried to print a photo (.jpg file) color - so I deactivated the "Print in grayscale" checkbox in the properties of the printer (just like always).

  But after clicking on the OK/Print button in the Print Wizard Photo, 4 the same error windows pop up.

  Translated from Danish:

  "An error occurred during printing.
  "The images cannot be printed due to the following error:

  ... But there is no description of error?

  Now 4 error popups every time I try to print an image (.jpg or .png) - but NOT when you print documents containing images (.pdf and .odf) that prints very well.
  .txt files print as well...

  Standard Windows 7 Photo Viewer no longer works. He tells me that I have not enough memory on my system to display the selected image (.jpg-file 3 MB)...

  I'm on a system Windows 7 Home Premium with 4 GB of RAM installed - I'm only using about 1 GB of them at the moment - is NOT a memory problem.
  The CPU usage is also about 1%...

  Any thoughts?

  Kind regards

  I hate this chime late trying to solve this problem, but I had the exactly the same problem (per month) and finally resolved.

  What has not worked:

  • Reinstall Windows 7 as an upgrade on the spot.
  • Upgrade to Windows 8 (improved the situation, but did not fix)

  What makes:

  • Create a new user account, it set until I transferred the old user account settings.
  • Set the color management settings.

  Before you reinstall, I suggest to create a new user account and try printing once logged into the new account. If the photo printing Wizard works when logged in with a user account, the problem is specific to the settings for the user account with the problem.

  To check the color management settings try this:

  • Click Start
  • Color in the search box type
  • Click on color management in the results of the research
  • Click the Advanced tab
  • Make a note of any settings that do not start with the system default
  • Change all settings that are not listed as default from system to system default
  • Close the color management dialog box and try again the Print Wizard

  In my case it was a colour profile Adobe corrupted causing the problem.

• New PPr upgrade and memory problems now

  I upgraded my version of PPr CC 2015 20 days ago and I went back to make a project that I had previously worked on and made more than 3 weeks. Now, it will not be made and the computer is just running out of memory and encoding is abandoned. I am on Windows 7 with a 2 years old i7 processor and have been able to use the first Pro CC 2015 without problem until the upgrade to the latest version that came out about 20 days ago. Are there bugs that are being developed here? Thanks for any info. I had the project made out by removing all effects to make sure it was a memory problem and quite sure the file render out with effects off the coast. However, I could make with effects on before this update.

  Thanks for you response Brian.

  Can you remove the effects of light and then give it a shot? Effects of light seem to be common with those who have reported this problem.

  Thank you

  Regalo

• Random problem, download files

  I have a random problem, downloading files on different web sites. I click on the file to download and retrieve the backup file with the file name box instead, I get something like "attachment.php". He always seems to be php files.

  By clicking on the file many times to download later, it will download, but it is very frustrating.

  I went through all the guides and troubleshooting suggestions. Nothing makes no difference. I disable add-ins, antivirus etc. nothing works.

  For example, this is the last download, I tried (click on the download button):

  http://www.Pixologic.com/ZBrush/getting-started/

  I got "download.php", which is not just the zip file with a different name. It is in fact different.

  Do it a few times I finally got the zip file.

  It seems to happen on any web site. The common theme is that this '.php' is involved.

  Is this a bug? Any ideas?

  Do you not see the correct link I posted above at the bottom of the browser window if you hover over the download button?

  • http://download.pixologic01.com/download.php?f=documents/ZBrush_Getting_Started.zip

  You can have security software as a software firewall or antivirus which is at the origin of the problems if safe mode did not help.

• Equium L20-197 - memory problem

  I have memory problem with pc-world of computing L20 and currys sell the L20 with suite spec 256 MB of main memory and 128 MB of video memory (up to 128 no) when this is not the first case of all memory is shared and there are 64 MB main memory and when you try memory video in bios , it won't let you upward in rising to 128 unless you install another memory stick no matter who else noticed this problem? I know that the previous model of the L10 with intel video chipset was supposed to allocate depends of the video memory load, but there is no mention of this on the ati chipset model. all the ideas!

  Hello

  AFAIK usually specification is 32 to 128 MB shared memory. Probably, it should be possible to put it in the BIOS. On some units with ATI graphics card, it is possible to put it under properties of ATI (display properties > advanced). There is an option to change the value of the AMU which will change the RAM allocation shared to the graphics card. It's usually adjustable 16 MB, 32 MB, 64 MB and 128 MB.

  Can I really don t give you answer correct but my friends a laptop with 512 MB RAM and it works fine.

  Good bye

• Windows has increased my virtual memory or page file for 2 days

  original title: Windows and virtual memory

  Windows has increased my virtual memory or page file for 2 days. Anyone know how long it takes, and if there is anything I can do to speed it up please?

  Also, will that be the reason I can't install programs?

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

• I need help with a problem of file softdub.dll any answers or how to replace it?

  I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Problem xlsx file type Association

  For some reason my windows does not associate the xlsx for excel file type. She open xls files, but it does not change excel file associations. I tried to 'open with', but excel does not list in the known alications window. I then walked to the exe file, but even after that I selected, it does not use the selected exe file

  Initially the computer had office 2003, and the compatibility pack did solve some problems. But I upgraded the 2007 office system and he doesn't want the excel 2007 list in the program group when I 'open with '. Even after I selt the real exe always saves used to list. If I open excel 2007 on his own and made to drag the file on it opens but it still does not resolve the problem laboratory file...

  Hi Synaps3,

  See if repair Office/Excel 2007 help. Otherwise, you can try this program and enroll in the "Open with" list Excel executable

  Record the programs with the "Open with:" dialog box
  http://WindowsXP.MVPs.org/openwithadd.htm

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Problems with file extensions, Vista is slow and crashes

  Salvation of problems with file extensions...   My computer is very slow and is stuck...

  Hello

  Use the startup clean and other methods to try to determine the cause of and correct problems.

  -----------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• I have a problem with file compression and then not be able to extract their share at a later date

  original title: file compression

  I am running Vista Home Premium on my laptop. I have problems with file compression and then not be able to extract their share at a later date. For example, I sent a file compressed to my instructor and she pointed out that she had a .zipx extension and the fact that she was unable to extract the files of ranking. Can someone help me with this problem?

  Hello

  1. do you have a third party compression/extraction of software installed on your machine?
  2. do you get an error message when you try to extract the files?
  3. is the relevant question for the particular file type?
  4. don't you make changes to your computer before the problem?

  Follow the steps and check if they help.

  Step 1:

  Open zip files is to open the folder and drag the content to another folder.

  See article:
  Compress and uncompress files (zip files)

  Step 2:

  If you have a third party software to Compress/decompress, I'd Uninstall it employs the way Windows compression and decompression of files/folders and see if they help.

• Memory problems and questions related to the process

  Does this look just for you, because the modified memory does little until after I had computer problems and had to do a factory reset

  The operating system is Windows 7 64-bit edition SP1

  I disabled SuperFetch is told by the way, if this help anyone on this issue.

  Resource monitor

  

  Windows process

  

  Services

  

  

  

  Performance

  

  Hello

  When your computer doesn't have enough memory for all the actions it is trying to perform, Windows and your programs can stop working. To help prevent information loss, Windows will inform you when your computer is low on memory. You can also learn to recognize the signs of low memory and take measures to prevent the problem. Insufficient memory problems occur when your computer is running out of RAM and becomes virtual memory. This can happen when you run more programs that the RAM memory installed on the computer is designed to support. Low-memory problems can also occur when a program free up memory that it needs more. This problem is called memory overuse or a memory leak.

  You can consult the following Microsoft articles and check if it helps.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-AU/Windows7/diagnosing-memory-problems-on-your-computer

  Prevention of problems of memory

  http://Windows.Microsoft.com/en-AU/Windows/preventing-low-memory-problems#1TC=Windows-7

  You may receive an "Out of Memory" error message because of the limitation of in Windows Vista or Windows 7 desktop heap

  http://support.Microsoft.com/kb/947246

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.