How to compile .vi to .rxe

Similar Questions

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• How to compile the single form?

  Hi all

  EBS R12.2.4

  RHEL6.5

  How do you compile a single form? or all forms in a single module as AR?

  In fact, I have compiled all forms for all modules in our case of BSE, and it took a lot of time. After that, the functional a user issue has been resolved.

  Now, I do not understand why another encounter similar error again functional:

  
  

  While it opens a form, the FRM-40735 displayed error message: a TIME-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-20002

  

  

  

  

  ---------------------------------------
  Current form
  ----------------------------------------
  Request form: claims
  Name: ARXRAATR
  Train path: /u01/appuat/UAT/fs2/EBSapps/appl/ar/12.0.0/forms/US/ARXRAATR.fmx
  Form Version: 12.0.30.12020000.2
  Last modification of the form: $Date: 2013/03/10 06:49 $

  How to compile this form ARXRAATR.fmx?

  Help, please...
  Thank you very much
  JC

  Check this document:

  Accounting revenue and sales credits: unexpected error while initializing FRM-40735: trigger once - new - form - Instance (Doc ID 1386372.1)

  Kind regards

  Bashar

• How to compile procedure Oracle procedure throught ODI

  Hello
  
  Can someone help me how to compile procedure oracle through ODI11g
  
  I'm Aguerre, how to call the oracle in ODI procedure and run it.
  
  Please help me
  
  Kind regards
  Phanikanth

  Hello

  We can invoke step by odi procedure below.

  modify the procedure compile

  Thank you
  Anuradha

• How to compile a customized in 11i jsp page

  Hi gurus,
  
  Please help me on how to compile a .jsp in 11i instance.
  
  Thank you
  Rambaud

  What version of 11i is your EBS? As I remember, no need to compile JSP in earlier versions of 11i; JSP pages is compiled during the loading of the page.

  Thank you
  Shree

• help on how to compile and run the awt programs

  any1 can tell how to compile and run the awt programs
  
  Published by: 863765 on July 18, 2011 03:29

  The same way you compile and run any other Java program.

• How to compile the forms in 11i

  How to compile form (APXINWKB.fmb) 11i Linux operating system.

  f60gen module = APXINWKB.fmb userid = apps/apps module_type = FORM output_file=/u001/appltech/appl/ap/11.5.0/forms/US/APXINWKB.fmx compile_all = special

  done above seems to compile.

  Yes.

  and make that FORMS60_PATH points to the correct path.

  FORMS60_PATH =: FORMS60_PATH: AU_TOP/resource$: $AU_TOP/forms/US;
  export FORMS60_PATH;

• How to compile the sdk

  Hello

  How to compile the sdk for windows Vista 64 bit and 32 bit?

  Frankly, it's really the first hurdle. If you can not get a sample project to compile and run using only the information that is available here and in the SDK, you will probably not much luck doing anything of your own work.

• How to compile files of pld using adadmin

  Hello
  How to compile files of pld. I used adadmin several times but want to know hoe to compile the files of the LDP.
  
  
  Sorry, now I don't have time to read many pages. If any what a coulr you please tell me the numbers of navigation, it is appreciated. Sorry again
  Concerning
  Taher

  Hello

  If you give option

  You want to regenerate forms Oracle PL/SQL [Yes] library files? YES

  Concerning

• How to compile and run a Pro * C under Unix program?

  Hello gurus,
  
  I'm new to the Pro * C. I just wrote a sample Pro * C program 'first.pc' to read some information in tables and print it on the screen.
  I do not know how to compile and run to see the release of my first program.
  
  After searching a lot, I tried following...

  -- Step 1 compile the program into .c program
   
  $->ls -lrt first.pc
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  $->proc first.pc
   
  Pro*C/C++: Release 8.1.7.0.0 - Production on Sat Oct 31 05:43:35 2009
   
  (c) Copyright 2000 Oracle Corporation.  All rights reserved.
   
  System default option values taken from: /oracle/app/oracle/product/8.1.7/precomp/admin/pcscfg.cfg
   
  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  -rw-r--r--    1 sqloper4 staff             0 Oct 31 05:43 first.lis
  -rw-r--r--    1 sqloper4 staff          6648 Oct 31 05:43 first.c
   
  $->
   
  -- Step 2 Generate the .o file
   
  $->cc -I${ORACLE_HOME}/precomp/public -c first.c
  first.c: In function 'main':
  first.c:154: warning: return type of 'main' is not 'int'
   
  $->
   
  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  -rw-r--r--    1 sqloper4 staff             0 Oct 31 05:43 first.lis
  -rw-r--r--    1 sqloper4 staff          6648 Oct 31 05:43 first.c
  -rw-r--r--    1 sqloper4 staff          3709 Oct 31 05:45 first.o
   
  $->
   
  -- Step 3 After that link the .o to libraries and produce the exe
   
  $->cc -o exe_name -L $ORACLE_HOME/lib -lclntsh
  ld: 0711-317 ERROR: Undefined symbol: .main
  ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
  collect2: ld returned 8 exit status
   
  $->
   
  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  -rw-r--r--    1 sqloper4 staff             0 Oct 31 05:43 first.lis
  -rw-r--r--    1 sqloper4 staff          6648 Oct 31 05:43 first.c
  -rw-r--r--    1 sqloper4 staff          3709 Oct 31 05:45 first.o
  $->

  I also tried steps below after some time thanks to the new program

  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  $->
  $->proc first.pc
  
  Pro*C/C++: Release 8.1.7.0.0 - Production on Tue Nov 3 05:42:14 2009
  
  (c) Copyright 2000 Oracle Corporation.  All rights reserved.
  
  System default option values taken from: /oracle/app/oracle/product/8.1.7/precomp/admin/pcscfg.cfg
  
  $->cc first.c
  first.c:142:19: error: sqlca.h: A file or directory in the path name does not exist.
  first.c: In function 'main':
  first.c:170: error: 'sqlca' undeclared (first use in this function)
  first.c:170: error: (Each undeclared identifier is reported only once
  first.c:170: error: for each function it appears in.)
  first.c:154: warning: return type of 'main' is not 'int'
  first.c: In function 'sqlerror':
  first.c:260: error: 'sqlca' undeclared (first use in this function)
  $->

  Can someone help me on above errors?
  
  After all, above yet I don't know how to proceed and "run" the program.
  Could you please help me with the steps 'Compile and run' a Pro * C program?
  
  Oracle DB Version: Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
  OS: Unix
  
  
  Thanks in advance!
  
  Published by: Learning.Oracle on November 3, 2009 17:13

  Hello

  -lsql10

  Which specifies the library to version 10, but it seems that you have your first assignment 8.1.7.

  You will need to look in your lib directory and see what we call the file in 8.1.7 - it's been too long and I don't remember the exact name.

  Kind regards

  Mark

• Plug-in for Eclipse: how to compile a source in several binary files?

  Hello gurus of BB,.

  recently, I spent my development environment of JDE for the plug-in for Eclipse (mainly because the new Blackberry7 is only available for Eclipse). I was able to transfer my apps; one thing remains to be done.

  Knowledge, I would like to compile the same source in two applications: a Lite and a full. Source code, as I said, is completely identical for both; the only difference is in the metadata (icon, name of the application, etc.) and in the fact that once the compilation of the version Lite, I #define a variable (in the source code, there is a certain //#ifdefs).

  How could I do in Eclipse? In JDE, I simply create a workspace and two projects (.jdp files) inside they can share sources. But in Eclipse, the Application descriptor does not seem to support that?

  Eclipse is very deficient in this way.

  That's why I use Netbeans + BB Ant tools to do all my Blackberry development.

  It provides very easy access to the configurations, a great support for ANT and support of editor/preprocessor much better compared to Eclipse.

  I losers to Eclipse debugging Department, so I created an ANT script to copy the files required in JDE and use it for debugging/profiling.   It is possible to get Netbeans to work with the debugger, but requires a lot of work and is obviosly a config not supported.

  A click or script executed and I have 12 + packages of different distribution ready to be distributed OTA/Desktop/BES all carefully packed in their respective folders.

  Configurations + several builds support has been expressed in BB repeatadly plug so far into the team, but no change.   I know that I'm not a point to track down the leads/developers of plugins at each conference of BB and put up a point on the configs... maybe next year that's going to stick

  p. s.

  You can get the 7.0 files outside Eclipse... you really have nothing other than the Javadocs and the net_rim_... jar, perhaps Cap updated as well.   All of you who are located in the folder of the eclipse plugin.  Just copy JDE6.0 and replace only the files required with the version 7.0 and you are ready to go.

• How to compile highlights and notes?

  I would like to print/compile the highlighted sections and notes to a document. How can I do this?

  Hi joe! a33522560,

  Please see this document for more information on printing notes in a PDF file: Print comments | Acrobat, Reader (this document is about instructions for Acrobat/Reader X, but they apply also to the Acrobat/Reader XI.)

  Please let us know if you have any additional questions.

  Best,

  Sara

• How to compile person entering masks a PSD?

  Hello! This is my first time posting in the Adobe community forums.  I tried to figure out how to make an image that has a photo assigned to each letter.  I've been using for each letter clipping masks in their own separate documents, but now I'm trying to figure out how to put all the letters with their photos in a single document.  The problem is that I don't want to merge the text and clipping masks because I want to be able to adjust the image of each letter in order to groom after that I see all the letters in the picture together.  To give you an idea of what I'm trying to recreate, here is a link to the image: http://designaglow.com/wp-content/uploads/2011/08/alphabet-frame-shadow-box-080411-1.jpg

  So, is it possible to compile individual files of a letter with a clipping of an image mask into a PSD?  Or I go about it the wrong way?

  Thanks in advance!

  Nice day!

  I recommend to do so with a text layer and cut Masksing images to that and giving the individual image layers, layer masks, and vector masks (in many cases a simple rectangular selection or a path should be sufficient).

  Kind regards

  Pfaffenbichler

• How to compile for Flash Player 11.3 in Flash CS6

  Hello

  How I can compile for Flash Player 11.3 using Flash Professional CS6, the menu has only up to 11.2

  What of 11.3 and the forthcoming 11.4?

  I already downloaded and added AIR sdk 3.3 for the skds AIR paths

  Hello

  The provision of compiling FP11.3 and FP11.4 would be available in the next version of updater for CS6.

  Thank you and best regards,

  Meenakshi Tiwari

  Team Flashpromanager.new Engg.

• How to compile and test the SIM card applet

  Hi all
  I have a sample applet:

  package sim.access.sample;
  
  import sim.access.*;
  
  public final class helloFile extends Applet implements ToolkitInterface
  {
         private static SIMView  theGsmApplet;
         private static USIMView aUsimApplet;
         private static AID theGSMAppletAID;
         private static AID theUSIMAppletAID;
         
         private static final byte[]  baGSMAID = {(byte)0xA0,(byte)0x00,(byte)0x00,(byte)0x00,(byte)0x09,(byte)0x00,(byte)0x01};
         
         protected helloFile(){
         
  
         public MyApplet () {
              theGSMAppletAID = new AID();
              // get a reference to the GSM interface
              theGsmApplet = SIMSystem.getTheSIMView(theGSMAppletAID);
         }
         
         
         public void doSomethingWithAFile(){
              
                 // returns the SIMView of the currently selected Applet 
                 // allows to implement services that are depend on specific 
                 // file in GSM or USIM application as well as to implement 
                 // technolgie independent applets.
                 SIMView theView = SIMSystem.getTheSIMView();
                 if(theView instanceof SIMView){
                      // do something with a GSM file
                 }
                 else if(theView instanceof USIMView) {
                      //do something with a USIM specific file
                 }
                 
                 // Or request a View to a specific application
                 USIMView theView = SIMSystem.getTheSIMView(aUSIMAppletAID);
         }
  
  }

  I want to compile and test, how can I do?

  Muhammad Umer wrote:

  safarmer wrote:
  You need the EXP files to be on the road to construction. This can be in the form of a POT that has a record of javacard under each package with the EXP file.

  I downloaded the package, but I wonder that, on compiling EXP file is automatically generated in the class path in the bin folder. But the I downloaded the package contains java card folder and EXP files inside of them, where should I put these files?

  JCOP generate EXP files for source code compiled for you. If you have it in a jar on your way of construction, then they are not replaced. I managed to unpack the java files and EXP files in the ZIP file of 3GPP. When combined into a single JAR file (with each package having a javacard subfolder) JCOP tools recognizes files and is able to use to build my project. All the necessary files are in the ZIP of the Web site.

  See you soon,.
  Shane