How to configure a remote server?

Similar Questions

• How to configure a FTP server and the web and integrate with 5.2 DMM

  Hi all...

  I need to set up an external server only for publishing content to reduce the overhead of the DMM server.

  can someone guide me on how to configure the external server and it intergrate with the DMM 5.2

  Thank you

  semuthu,

  
  

  Notes from the Release Notes:

  
  

  Limitations of compatibility with Microsoft Internet Information Server (IIS)

  DMP who use firmware version 5.2 is compatible with a single version of Microsoft Internet Information Server.

  This supported version is IIS 6.0 for Windows 2003 Enterprise Edition. If you do not have the support for IIS version but

  want your DMP to recover the assets of a Web server, we recommend that you use Apache instead of IIS.

  
  

  
  

  I suggest to use Apache instead of IIS for the Web Server service. IIS can be used as FTP if necessary.

  There are a lot of Documents on the Internet concerning the implementation of Apache and FTP servers.

  
  

  Using Apache with Microsoft Windows

  http://httpd.Apache.org/docs/2.0/platform/Windows.html

  
  

  Quick HOWTO: Ch20: Apache Web Server

  _ http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO: _Ch20_:_The_Apache_Web_Server

  
  

  Once the Web server is configured and operational. You simply record your multimedia content on the Web server

  and then have your DMS assets in the library using an external URL address for its location.

  
  

  If you want to use the external server for other features in the DMM, you can see how to set up

  here:

  
  

  http://www.Cisco.com/en/us/partner/docs/video/digital_media_systems/5_x/5_1/DMM/user/guide/DSM+ETV.html#wp1073210

  Goto the section just below the CNSC & WAAS...

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

• How to configure the SMTP server for the osb 10.3.1

  Hi all
  
  Anyone can share information on how to configure the SMTP server for the osb 10.3.1
  and then how to send an email to OSB 10.3.1
  
  Thanks in advance!

  See this url:
  https://blogs.Oracle.com/christomkins/entry/sending_an_email_from_oracle_s

• Configure the remote server and test

  I installed Dreamweaver CS 6 and 10 CF and MS SQL server on the same computer.

  I use Dreamweaver CS 6 to create a test web site and to set up the remote and testing server.

  Dreamweaver invite me to enter the host name and the full directory.

  I would like to know what I need to enter information?

  hostname is localhost?

  complete diretory will C:\inetpub\wwwroot or C:\ColdFusion10\cfusion\wwwroot?

  Your information and your help is much appreciated,

  Kind regards

  iccsi,

  Iccsi,

  Yes. Host name to the title of "Test Server" is the hostname of the server test - in your case, since you're using CF, it must be the path in which CF works. It will be localhost:8888 or something similar - depending on what port you have configured for the webroot when installing CF. you could check in CF dashboard. Or, you could start CF server, open your browser, enter localhost. If the loading of the page Web of the CF by default, it's just localhost. If this isn't the case, add the port number.

  The remote server is your real Web server. It may be http://www.somesite.com or if you run it in a separate folder within your main site, it will be http://www.somesite.com/test - depends on you want to download the files of remote work.

  The complete directory under local configuration is the place where your files are located on your local system. Still, if you use CF, you can thus use CF webroot to create / store files - this way, you don't have to make copies of files in 2 places since that you configure the same folder as your test server too.

  -ST

• How to configure the print server on multiple machines?

  Hello
  
  Can you get it someone please let me know the installation process of print server on multiple machines?
  That's what I thought.
  1. install Ghostscript on all machines.
  2 configure the print server on all machines.
  3. I guess I should point the IP address somewhere as a final step?
  
  Thanks in advance
  PM

  The steps you mentioned is correct.

  When you configure the print service, you can set the URL of the web application server financial information in .properties and this file will get stored in the HSS registry (this is the step where you run the FRprintserversetup.cmd). So when you run Setup of each print server there will be created for this purpose in the HSS registry entries. Then, there will be an internal logic that will work on what server should take what process.

  THX

• How to configure the remote agent to talk to the server of OLT

  Hi all

  I just install OAT 12.3.0.1 on Linux server and also install a separate OLT agent on Linux oul5x64

  Issues related to the:

  How can I configure this agent to communicate with the backend of OLT.

  Thanks in advance.

  Hello

  You must configure a system remotely from the console of OLT (menu Tools, I don't have the GUI in front of me).

  You must make sure that your agent is running. There is a script to test the State of the agent.

  You must also make sure that the two machines can talk to each other with the same name & IP. BTA is very sensitive to this. Most of the problems of communication between the server from the OLT and agents is due to resolution of bad reputation. Better to day/etc/hosts on both sides with IP & names.

  Please give a try and let us know

  JB

• How to configure the remote desktop connection

  Original title: home remote desktop connection

  trying to desktop connection remote set-up on a spare home computer how I would go all this? my main computer is wired ethernet my spare part is wireless

  Hey Shawn,.

  Follow the steps in the link to set up a desktop connection remotely on computers.

  http://Windows.Microsoft.com/en-in/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  In addition, through the FAQ for remote desktop connection of

  http://Windows.Microsoft.com/en-in/Windows7/Remote-Desktop-connection-frequently-asked-questions

  For any questions, have a look on

  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-using-Remote-Desktop-connection

• How to configure VPN remote access to use a specific Interface and the road

  I add a second external connection to an existing system on a 5510 ASA ASA V8.2 with 6.4 AMPS

  I added the new WAN using another interface (newwan).

  The intention is to bring more internet traffic on the new road/interface (newwan), but keep our existing VPN using the old interface (outside).

  I used the ASDM GUI to make changes and most of it works.

  That is to say. The default route goes via (newwan)

  Coming out of a VPN using a site to character the way previous (out) as they now have static routes to achieve this.

  The only problem is that remote incomming VPN access Anyconnect do not work.

  I put the default static route to use the new interface (newwan) and the default tunnel road be (outside), but that's the point is will not...

  I can either ping external IP address from an external location.

  It seems that the external interface doesn't send traffic to the - external interface (or at least that's where I think the problem lies). How can I force responses to remote VPN entering IPS unknown traffic to go back on the external interface?

  The only change I have to do to make it work again on the external interface is to make the default static route to use external interface. Calling all internet traffic to the (external connection) original

  Pointers appreciated.

  William

  William,

  As it is right now that you will not use the same interface you have road to terminate remote access unless you know their IP addresses by default.

  In one of the designs that I saw that we did something like that.

  (ISP cloud) - edge router - ASA.

  The edge router, you can make PAT within the interface for incoming traffic on port udp/500 and UDP/4500 (you may need to add exceptions to your L2L static) of the router. It's dirty, I would not say, it is recommended, but apparently it worked.

  On routers, this kind of situation is easily solved using VRF-lite with crypto.

  M.

• Draemweaver CS5.5; How to designate a remote server for web site folder

  Having a complete website built w / DW CS5.5 who I am trying to load on my GoDaddy hosting account. Site uploaded to the root directory of my GoDaddy account instead of the 'public_html' folder in the folder root. Want to re - download the 'public_html' folder, but there is no apparent provision in DW to point the upload to a specific folder (i.e., public_html) in the root directory of my account.

  On my GoDaddy website management page, I can spend my file root GoDaddy files downloaded in the public_html folder subordinate, but have to make an image file/t once (against a folder of files). It's a ton of shots, but more importantly, moving them individually will break all the links, so is not an option.

  Any ideas how to target the "public_html" folder in my folder root so I can re - download site here?

  Site > new Site or manage Sites.  See screenshots.

  

  Servers: In your case, the root directory is public_html / htdocs not.

  

  You should NEVER see the root directory in your local files Panel.  If you see in the local files Panel, your site is not properly set and you probably duplicated this folder on your server.

  Nancy O.

• How best configuration connect display server and composer to limit the single point of failure?

  Hi all

  
  Just had a few quick questions:

  1.) how everyone is to limit the Connectoin Server view to a single point of failure.  All the reading I did looks that everyone puts in place two servers connectoin and doing DNS round robbin on it or put two servers behind a load balancer connection

  (2.) what happens if the mode to connect to the server disconnects while users are connected and actively using desktop computers?

  3.) how to protect View Composer of single point of failure.  It seems that most people are installing this on there vCenter server and everything by leaving it with VMware HA.

  (4.) what happens if View Composer breaks down and you have Active Desktop sessions used by users who are linked clones

  (5.) what is the login used for replication partner server view?  This is a new feature in display 6 that creats a form any cluster to the login server?

  
  Let me know,

  
  Thank you

  1. Yes. Need a load balancer. Something better than a round robin DNS since those who go ping (response from the host)-based and not necessarily whether the service is in place (port 80/443 replying with 404)

  2. the user disconnects. When the reconnection that they continue where they left off.

  3. just about everything. Also ensure that regular backups are performed by the login server. Don't forget that if you need to restore, to restore a backup SQL composer both AD LDS.

  4 should be fine. The only problem is during commissioning, a linked clone or create a delete. Then could be a problem. Updating should be ok

  5. a replication partner? Do you mean the replica server? It's just an identifier during the installation as to whether, during the installation of the connection to the server, create you a new instance of the view or expand an existing one. He ends by as a peer to other servers to connect in the same instance (POD).

• How to configure WebLogic Admin Server and the managed server

  Hello
  
  I work to configure a Weblogic admin and the managed server, but fail.
  Can I know the correct steps for the installation system?
  
  
  TX.

  Good. It might be a good idea to mark this question as answered, then.

• How to configure a proxy server to listen to a jms queue

  I have to work the next senario.
  
  
  
  (1) service proxy/business will push the message to a jms queue1
  
  (2) another proxy will query this message from this queue1.
  
  
  
  can any body help how to achieve this.
  
  
  
  Expecting an explanation for each of them... : |

  Before I explain how to do this, allow me to clarify the purpose of a business service and a proxy service:

  -Service business is the representation of Bus Service from a service provider - that is a service that you call the BUS
  -A proxy service is exposed to your good service - service of Bus Service that is a service hosted ON the bus

  So, to place a message in a queue FOR THE bus (your scenario 1), you will need create a business service (need to be e-mail type and use the common JMS transport). You will also need to create the JMS resource (queue/topic plant and connection yourself, because these will be generally on another computer by the service bus). This service can not be called directly by consumers of services - you will need for it from the front with a service proxy to do this. This proxy service could, if you choose, expose this business using a different message format and/or a different protocol if you wish.

  To search for messages in a queue, you need to set a proxy service (also on the type of messaging and the use of the JMS transport). In this case, given that the proxy service is hosted on the Service Bus the JMS resources are created for you (unless of course the queue is remote).

  Please post here if you have any other questions.

  Thank you

  Chris

• Remote server configuration problem

  The problem I have is that the various dialog boxes multiple paths in the configuration of the remote server seem rather amibiguous. I tried what seems like every combination of remote and local access roads, as well as various url strings. Any combination I can't get the file to resolve a URL that works.

  Our current development configuration consists of a central server running Windows 2008 Web Server and ColdFusion 8.0.1. There are three of us using the machine, each developer has their own part on it. We each have our own set of virtual servers running from the share, through IIS on the server.

  This has been a great Setup for us because it allows almost double environment for our production configuration. However, I can't for the life of me get a remote server configuration works completely. I have a machine of secondary dev I use where I'm running CF9 locally, and it works perfectly (I am aware of people who say that eclipse doesn't really want you develop remotely). We will move our server main dev CF9 immediately, and we want to keep the centralized server dev, remote server seems how to configure things.

  It seems that the best scenario is to set up a server for each virtual server I set up. I would set a maximum as in the dialog box:

  General settings
  Server name: foo - site.com

  Host name: dev1.foo - site.com

  Other parameters

  Web server port: 80

  RDS username: my user name

  RDS password: my password

  The remote server settings

  Naming port: 2910

  User name: username admin-server

  Password: password-server-admin

  Document root: (it is a source of confusion, does she want a url? a local file as my drive path mapped "Z:\) » ? or the physical path on the server 'C:\webroot\ '? Could be a path from my eclipse installation? Also, he wants a global path? "or connected to this server config?)

  Mappings

  Local path: (Once again, similar confusion... If it is local to me, or the server? or maybe a url?)

  Remote path: (If this should be a url, and if so does an absolute url for the local path listed above? And this she the Local path is the root of the virtual host, it must then be the same as the document root [which doesn't seem to work]?)

  Install Extensions

  Root Web server: (If it's a physical path? should be related to Eclipse on my machine? or from the server?)

  Installation location: (It would depend on the web root of remote server of course)

  I keep trying different things, and end with either the CF for a project server settings telling me the project exists outside of the root of the web, or sample that url looks like [ http://[hostname]/[projectname] .

  Any help would be greatly appreciated.

  The document root must be a physical path on the remote server, for example 'C:\webroot '. This is the path on the remote computer and the path not mapped on the computer on which the CF Builder is installed.

  In maps, local path is the path on the computer on which the CF Builder is installed. Path remote is the path on the remote machine and not the URL.

  for example if CF is installed to D:\Coldfusion on the remote computer and the local computer (where CF Builder is installed) you have the files in C:\ColdFusion, then when you configure the remote server, you must define the root of the Document to D:\Coldfusion\wwwroot and then you must create a map with local as C:\ColdFusion\wwwroot path and remote as D:\ColdFusion\wwwroot path.

  CF Builder uses this information when you preview files and when you debug a file.

• Remote server

  Configure a remote server so that I can download my files to a new site to my hard drive from my Web host.

  Local files in the Panel on the right side of the screen displays all the files and my site folders that are displayed under the heading "files the.

  The Panel on the left side of the screen under the heading 'Remote server' does is display a folder named "/" (without the quotes) as well as a few other folders and files that have nothing to do with my site.  How can I get all of my files and my site folders to display in the Panel on the left under 'remote server '?

  Thank you

  Robert

  As soon as I posted this message I realized that he had only the files that were already on the hosting site.  Initially I thought that my files the it display then I could take what I wanted to put on the site of the host.  I just watched a video online of how the process works and the screen of the instructor had all their Web site files displayed, because they had already put their entire website to their hosting provider, then waiting to see all of my files displayed in a similar manner, without realizing that the instructor had already transferred their files.   You said before that I could come back to this post and delete.  Everything seems to work.

  Thanks for your extremely fast response,

  Robert

• [ADF, JDev12.1.3] How to configure GlassFish to run my application ADF using HTTPS/SSL?

  Hallo,

  on GlassFish 3.1.2 I have deployed my ADF Essentials application.

  Now I configure GlassFish server to run my application using HTTPS/SSL.

  I would like to install the certificate MyDomainCert.crt, Intermediate.cert and MyDomainPrivateKey.crt files and configure GlassFish.

  Could you kindly advice me a clear and not to hard document that describes how to configure the application server?

  Thank you very much

  Federico

  Finally, I reached the goal

  These links also helped me:

  Installation certificate Thawte on 3.11 Glassfish server for https traffic. Art of Software Engineering

  https://javadude.WordPress.com/2013/03/22/GlassFish-v3-1-2-and-SSL/

  Programming the Mr.J4mes Wonderland: [How To] - implement the SSL certificate on the GlassFish application server

  In addition, I would say to use the free program "KeyStore Explorer" (key - homepage file Explorer) to easily import the certificates and private key in the keystore of Java.

  Ciao,.

  Federico