How to connect and configure two wireless routers to provide the same connections across large areas?
I have a big long House and prefer to use two wireless routers EA4500 to remote points to offer the same connections from one end to the other.
How to make this wise (?) configuration
You can cascade two of them. Follow the steps on this link.
Ann_18678
Linksys technical support
Tags: Linksys Routers
Similar Questions
-
How I find myself with two passwords to iCloud for the same account?
How I find myself with two passwords to iCloud for the same account?
For security reasons, I only use iCloud for Contacts and "find my iPhone".
Several months ago Apple forced me to change my password to iCloud. So I did this. In the last months, I used successfully the new password to 10 or 12 times when asked without problem.
However, I received a notification of a software update for my Apple Watch. I did the update without problem. However, after completing the update my iPhone asked me to connect to my iCloud account. When I did this, she rejected my password. I made 4 attempts typing very slowly and with care for you sure I did it right.
Then, operating under a hunch, I decided to enter my old password to iCloud. It worked? I'm confused about this, any ideas would be appreciated.
I had a similar problem last year. I had to call Apple. Contact is a bottom of this page.
-
How to put in place two sound devices and make two of them work at the same time?
I am on Windows 7 Ultimate and I have a problem...
I downloaded the SRS Audio Essentials software that improves the sound quality
And I have Realtek audio device which is an audio driver that come with bulit in sound card
But the problem is that I can choose only one of them as the default audio device
When I was with Windows Xp, two of them worked at the same time...
He is the captain:
http://www.Flickr.com/photos/96392754@N07/8812378555/
Help, please!
PS: Sorry for my bad English... ^_^
Hello
Unfortunately this does happen, as it is by design,
Here, a single device can be marked as default device, follow these steps below for more information.
a. Click Start, type Sound in the box to start the search.
b. click sound in the results of search at the top of the start menu.
c. click the reading notice the check mark next to the default device.For all windows questions do not hesitate to contact us and we will be happy to help you.
-
When you configure synchronization how sync manages information on two computers? It merges the information?
Hello!
Yes, how Sync is that it brings together all the bookmarks and pushes them to all your devices. Same thing with the story.
You will lose all the information in one of your computers.
-
doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content
The portal_domain field contains;
AdminServer (admin) and Enterprise Manager, (port 7001)
IBR_server1, (port 16250)
UCM_server1, (port 16200)
WC_Spaces1, (port 8888).
On the same machine, I have another weblogic, admin and for the ITS.
The case is that continued to develop for the upgrade to the new skin WebCenter content.
That's my goal.
Then I did some research and came to the following notes in support.
1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()
and
2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()
The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.
And the list of patches;
===================================================================================================
Installed products of higher level (1):
Oracle WebCenter content management install 11.1.1.8.0
There are 1 products in this House of Oracle.
Installed products (40):
Cloning of the 11g Application Server 11.1.1.8.0 component
Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0
FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0
FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0
Component install SDK 11.1.0.9.0
Oracle Application Server Configuration 11.1.1.7.0
Part of Oracle 11.1.1.7.0 Bali
Oracle 11.1.1.8.0 capture
Common files Oracle WebCenter content management 11.1.1.8.0
Oracle Content Server 11.1.1.8.0
Content of Oracle 11.1.1.8.0 Server component
Content access Content Server Oracle 11.1.1.8.0
Access to the contents of the Oracle Content Server 11.1.1.8.0 files
Oracle Content Server Core 11.1.1.8.0
Oracle 11.1.1.8.0 server content distribution
Oracle extended Windowing Toolkit 11.1.1.7.0
Oracle Fusion Middleware Admin Config 11.1.1.6.0
Oracle Help for Java 11.1.1.7.0
Oracle Help for the Web - UIX 11.1.1.7.0
Oracle Help for the Web Shared Library 11.1.1.7.0
Oracle Help share library 11.1.1.7.0
Ice browser Oracle 11.1.1.7.0
Oracle IRM 11.1.1.6.0
Oracle extended JFC Windowing Toolkit 11.1.1.7.0
One-time correction of Oracle 11.1.0.9.9 installer
Oracle outside in technology 8.4.0.0.0
Oracle Remote Client of Intradoc 11.1.1.8.0
Component of Oracle 11.1.1.7.0 rules
Oracle SOA 11.1.1.7.0 workflow
Universal Oracle install 11.1.0.9.0
Oracle Upgrade Wizard 11.1.1.8.0
Oracle Upgrade Wizard 11.1.1.8.0
Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant
Oracle WebCenter Capture 11.1.1.8.0
Oracle Webcenter content - rights 11.1.1.7.0 documentalist
Oracle WebCenter content - Universal Content Manager 11.1.1.8.0
Oracle WebCenter content management install 11.1.1.8.0
Oracle WebCenter content 11.1.1.8.0 management product suite
Oracle WebCenter content: Imaging 11.1.1.8.0
OracleAS Documentation 11.1.1.8.0
There are 40 products installed in this House of Oracle.
Interim plates (2):
Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014
Patch ID: 17263162
Created February 5, 2014, 12:56:41 pm
Bugs fixed:
15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410
14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600
16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416
15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499
16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731
17560900, 14246603, 15941347, 16045712
Location of patch in the inventory:
/ app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143
Patch location in the storage area:
/app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41
Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014
Patch ID: 17182855
Created February 16, 2014 20:35:48 hrs PST8PDT
Bugs fixed:
17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742
17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746
17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384
17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458
17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841
17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678
17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807
17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875
17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130
17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707
17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000
17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804
17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903
17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818
17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301
17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380
16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858
16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987
16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337
17424037, 17006115, 17171834
OPatch succeeded.
==============================================================================================
And contains the following configurations in config.cfg
==============================================================================================
SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79
xPortalSecurityPropagate = true
Web server = javaAppServer
AllowUpdateForGenwww = 1
SearchIndexerEngineName = OracleTextSearch
IndexerDatabaseProviderName = SystemDatabase
AdditionalEscapeChars = -: #.
FileEncoding = UTF8
MaxQueryRows = 2000
DisableAuthorizationTokenCheck = true
IntradocServerPort = 4444
SchemaPublishInterval = 604800
SSAllowDelayedProjectWrites = true
IdcServerThreadQueryTimeout = 120
DisableQueryTimeoutSupport = false
MaxSearchConnections = 20
#Cache
UseSearchCache = false
#
#AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:
# Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()
MaxAccountsInSecurityClause = 300
# end (Doc ID 1639028.1()
#Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()
DoCaseInsensitiveAcctSearch = false
# end (Doc ID 1676468.1()
#MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID
==============================================================================================
To my UCM_Server1 content WebCenter.
As I already have a WebCenter content I have to follow the second part of the note
How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).
Install and configure content WebCenter ADF WebUI against WebCenter Content Server
Step 1) install the MDS schema
(Step 2), install the Weblogic Server
11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here
Step 4) Download and apply Patch 16, 546 129.
Step 5) Download and apply Patch 16, 546 157.
Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch
Step 7) copy the wccadf files in the field of user interface
Step 8) Oracle on demand services (MDS) metadata registry
Step 9) Place the WebCenter content domain user interface model
Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain
Step 11) updated the Oracle ADF of shared libraries
Step 12) start the domain WebUI administration server
Step 13) Save target Managed Server with the MDS repository and create the metadata partition
Step 14) start the server managed WebUI.
Step 15) associate UI WebCenter content to Content Server.
Step 16) reboot the WebUI ADF server managed.
Step 17 access the WebUI
Step 18) complete the Configuration of the workflow
Step 19) apply the latest Patch Bundle content UI of WebCenter
MY DOUBT IS:
To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.
I have two servers weblogic?
portal_domain (explained above) and a new wccui_domain wls and domain.
This fix it?
Two WLS to keep WebCenter portal and content, and other elements.
Because I'm not able to do with the WLS even where I UCM_server1 today?
Thanks for all suggestions and criticism.
To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.
I have two servers weblogic?
portal_domain (explained above) and a new wccui_domain wls and domain.
This fix it?
Two WLS to keep WebCenter portal and content, and other elements.
Because I could not do with the WLS even where I UCM_server1 today?
Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.
This is due to a problem with ADF and WCC libraries.
With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.
-
LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES
Check your hosts file. to help with this and more:
Log, activation, or connection errors. CS5.5 and later, Acrobat DC
-
How do I keep my wifes calls appear on my phone and mine appear on hers, we share the same acct icloud and itunes? It just started this on one or two updates ago
Welcome to the Apple community.
I'm afraid that is what happens when you share an Apple ID.
Ideally you should each have your own ID and use family share for share purchases, but at least you would be better to have your own ID's for everything except iTunes.
I suspect that your problem is that you share an ID for FaceTime, you must either stop this or make sure that you have only and that your caller ID is only your phone number.
-
How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.
* original title - how to install and configure the computer virtual and XP operating system inside, with vista as my work machine.*
How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.
Hey Preethi23
It comes to the installation of vista operating system instance
read the links below
http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx
http://www.Microsoft.com/Windows/Virtual-PC/support/FAQ.aspx
Walter, the time zone traveller
-
How to install and configure Essbase in System i or AS 400
Hi all
I have been instructed by my employer to install Essbase 11.1.1.3 AS 400 system. Can someone guide me that what and how I have to finish this task.
I don't know how to install and configure Essbase in Windows but I never get chance to work on AS 400 systems.
I have feedback promp hopping.
Thank you much in advance.The old SPSS (now IBM) product lags Oracle a bit. I think that they jump system 9 altogether.
I remember using the Essbase 5 (I think) version of it on an AS / 400 and the thought, he behaved exactly as an instance of Windows 'normal '.
Kind regards
Cameron Lackpour
-
I have a DAQ Assistant configured to read 2 channels at the same time. When I have a graphical indicator of wire to the output, I see 2 signals mixed together. How I divided them into separate signals?
When I wire any type of indicator, it is show that a release of a single channel.
I want 2 indicators showing 2 different signals as expected from 2 channels configured. How to do this?
I tried to use split signal but it end by showing that 1 out of 1 signal two indicators.
Thanks in advance.
Yes you are right. I tried, but I don't have the result.
I just find the path. When we launch the split signal, we should expand it (split signal icon) by top, not the bottom. It took me a while to understand this.
Thank you
-
How can I have two virus Gabrielle clocked at sametime?
When I have only a single virus of Gabrielle, I know, this program is Mcafee.
It is not recommended to run two anti-virus programs at the same time. It will make the System unstable, crashes, slow performance and so on. It is better to use a program that you trust on a regular basis and if you want to double check this program, use a parser in line one of the main websites AV.
"Firqure" wrote in the new message: * e-mail address is removed from the privacy... *
How can I have two virus Gabrielle clocked at sametime?
When I have only a single virus of Gabrielle, I know, this program is Mcafee.
-
How can I search all subjects in my guide? and if this is not possible, how do I get books have not not subjects with the same name?
"People need be able to find these without having to look inside each book TOC.
Sorry, but I'm not a big fan or user of this sensitive arrangement "New kid on the block. Therefore, it may be that I am simply misunderstanding because I do not regularly use it. Of what you say, it seems to me that if you (or more precisely your users) are not able to click on the right side, where he says 'Getting Started' or 'List of Email Campaign' and see these topics open and view the content with search terms highlighted?
Regarding the "bookmarks", those that are normally visible by the user and will be not viewable unless the name of the bookmark appears also as text within the topic. Although, if the two are different, you could probably get there by adding the name of the bookmark as a keyword search in the properties of the section.
In any case, I feel that at this point, I can just be frustrating you and you may need someone else to try to help that probably better understand the issue.
Sorry, I was not able to help.
See you soon... Rick
-
Looking for help to find articles or resources to learn more about how to migrate to a new computer and also upgrade CS5 to CC at the same time. Should I migrate and upgrade?
You don't want to think in terms of migration when it comes to Adobe software. You must install using installation files. There is no need to have installed CS5 unless you plan to use it. There is no way to upgrade of CS5 at CC, there is a reduced plan should soon be interrupted. You get the first annual subscription for almost half of the normal price.
Creative cloud plans
https://creative.Adobe.com/plans
Director of the installation:
Download/install the desktop application, connect and install applications subscription.
Creative cloud to desktop
https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.htmlSign out, sign in | Creative office cloud app
http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.htmlInstall, update, or uninstall applications
http://helpx.Adobe.com/creative-cloud/help/install-apps.html -
How to get firefox 4 to allow two separate processes run at the same time.
I'm used to be able to run two separate processes of firefox and so also run two separate user profiles at the same time as well. But I recently moved to firefox 4 and windows 7 and the other, or these two prevents the old method, I used to work. Basically I was running firefox (via 'run' or via an edited shortcut) with the following executable:
p - profilename - noremoteAnd it would launch a separate process that runs under the profile name. Is it possible to do this with firefox 4 and win7?
I am a developer (web and desktop applications) and it is highly preferable to do so. One of the reasons is that, if one of the processes one falls, the other is fine. Another is to have separate profiles so that addons with leaks of memory, like firebug, can be run in its own process and I can restart when I have to without affecting other processes. I sometimes also need to set the processor affinity so that a process of firefox is not a big eater.
Any help would be appreciated.The correct format for this command is -no-remote
-
My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?
settings - phone - call another device - off.
One of you should get their own apple ID, you just go to have problems later.
Maybe you are looking for
-
Some text boxes on a page are rendered with a green background.
On certain Web pages, the text blocks will make with normal text but a green background, despite whatever the color/image background is supposed to be. I have seen this happen for sure on the results page of Google search (on the right where it somet
-
Re-import does not? (camera connected very well)
Background: * I have clips that have the icon of film in their breast, this seems to be due to a hiccup during the import occurs. Creating a project using some of these types of clips from this event worked well. Project plays very well. * Trying to
-
I wanted to know how I can increase the font in the column of the mailbox to the left
I wanted to know how I can increase the font in the column of the mailbox to the left
-
On a NOR-6363: how many digital samples can be acquired at once?
Hello I use a NOR-6363 with meter 3 configured for pulse generation finished. I created a digital input channel to acquire digital values (on P0.16 and P0.17) with counter3 as the sample clock. The idea is to acquire a finite number of digital sample
-
After diskpart E, F, G, H disappeared
Victorinox original title: diskpart I had 5 partitions under disk 1 320 GB, C, D, E, F, G, H, windows running on C 10 GB, I needed to extend the C:, I used diskpart to merge d: 63 GB on c:. 1. Select volume d: 2 remove this volume 3 - Select volume c