How to connect Jabber to MeetingPlace without HTTPS

Similar Questions

• How to connect to iSCSI SAN without compromising security

  Hello:

  How to enable server OSes (VMS or physical host computers) to connect and LUN iSCSI mount without compromising the safety of our ESX host?  We have a few Microsoft servers that need to use iSCSI initiators at Mount MON for MSCS.   We cannot use the ESX initiators because VMware doesn't support iSCSI to virtual storage with MSCS.  We have already read all the documentation and spoke with VMware support, so we know that our only option is to use the iSCSI initiators in Microsoft servers to connect to the LUN.

  Our concern is security.  If we let the servers use their iSCSI initiators to connect to the San, then they also won't have access to our service and the vkernels via the iSCSI network console?  ESX requires that you have a port the service console and the port of vkernel on the iSCSI network for each ESX box that you want to use the ESX initiator for.  We struggle to understand how to connect any machine (virtual or physical) to the iSCSI network to mount LUN without exposing our service and vkernels consoles.  I know that the best practice is to remove this VMs network for this exact reason, but of course many organizations also have physical servers (UNIX, Windows) who need to access their iSCSI SAN.  How people treat this?  How much of a security problem is it?  Is there a way to secure the service console and vkernel ports while allowing host ESX - no access to the SAN?  I know that many of you are facing this exact in your organizations situation, please help.  Obviously, it is not supposed that nobody uses their SAN iSCSI for anything else except for the ESX host.  I thank very you much.

  James

  Hello

  Check out this blog

  Use of firewall is certainly a step in the right direction for that. If you can't have separate iSCSI networks, then you will need to isolate nodes NON-ESX/VCB iSCSI using other mechanisms. I would certainly opt for firewalls or reduce the redundancy to just 2 network-by-network cards and not 4 to a single network.

  Someone at - it any other suggestions? Surely many ESX users share their iSCSI SAN with a lot of different systems and operating systems. Thanks again.

  They do, but they do not secure their networks for their VMs ESX iSCSI / other physical systems. You have asked a very important question and it's how to connect to iSCSI SAN without compromising safety. If the options are currently:

  1. Physically isolate

  2. Isolate using firewall

  Given that ESX speaks in clear text and does not support IPsec for iSCSI, you have very limited options that are available to you. The firewall you use and charge iSCSI, you send through it will determine if there is no latency. Yes its a cost extra, but if it is an independent network switches/ports/etc.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• How to connect to another user without password account, with the administrator account in Vista?

  My son will connect to FB, then goes to bed and does not sign off the coast. I log in and the machine is really slow. I am administrator in Windows Vista. Can I disconnect it without password?

  
  * original title - how I as an administrator can connect my son, another user of my computer. I can get her password, but is it a switch, so I can just cut him so my machine is not so slow? *

  Hello

  Unfortunately, we are unable to disconnect another user without password account.

  However, you can restart the computer that would disconnect the other accounts.

• How to connect to windows 8 without a windows account?

  I was able to help a few people with their win8 configuration and had TO create a LIVE windows for respective users account.  How win8 users can take total possession of their computer without having to create a LIVE account?

  Although the above post is great, especially if you want to create a new 'local' account, in my view, is not the best answer to your question.

  Lets start at the first installation. On several computers, the default option says to create an account, called from Microsoft. When you are on this screen, near the bottom, there is an option that allows you to create an account without a Microsoft account. After pressing this option, the next screen will give you two choices, create Microsoft then use or create the local account. The option you are looking for is to create a local account. A local account is not linked to what anyone and it's like an account on any previous version of windows.
  Now, if you already have a Microsoft account is created, you can simply switch to a local account.
  Here's how.
  1) pull up the menu charms by moving your cursor over one of the right hand corners. The cursor must be completely in the corner and won't be visible. Or the easiest, is to press the windows key and the c key at the same time.
  (2) select the settings options.
  (3) now, click on the text at the bottom that says "change PC settings."
  (4) on the screen that appears, select the users in the left part. By default, the user you are connected as a poster.  A bit of the top, you will see the option that says "Switch to local accounts."
  (5) follow the instructions that popup. Once you have done the above, your account is now a normal windows account.
  There are advantages to having a Microsoft account, but I don't know how frustrating it can be to go through the long process of creating a windows account when you simply want to connect and play with the new computer.
  PM me or post back if there is something that is not clear.
  I hope this helps.

• How to connect an Oracle database without using input TNS

  Hello
  
  I need to connect my pc Oracle database server without using the TNS entry. How to do this?
  
  Kind regards
  
  007

  [easy connection: CONNECT to username/password@[/]host[:port][service_name]

• How to connect my ipencil with the http://bit.ly/joc0zm application?

  I looked at the demos of the pencil for a job for which is obviously the http://bit.ly/joc0zm app. I bought the pencil and the http://bit.ly/joc0zm app but can find no way to add the pen device to the app. Only my finger works? How can I add the pen device to the http://bit.ly/joc0zm app?

  Assuming you have an iPad Pro, you should be able to plug the connector of lightning on the port your iPad lightning pencil to pair them up. When you have successfully paired with pencil, http://bit.ly/joc0zm should work as expected.  Good luck!

• W530: How to connect 4 external screens without USB DOC

  I want to connect multi monitors without USB - DOC.

  Is this OK as follows?

  1. change the type of connector of the Mini-affichage port to display the port.

  2. "port to port adapter display dual display ' connect.

  3. at each port, more "Display port for port adapter dual display ' connect...

  Please tell me the solution.

  Thank you.

  This configuration will not work.

  You need a workstation series 3 dock with 2 sets of DP ports.

  Need you a separator of RFP for each of the DP ports on the dock.

• How to connect to the computer without the administrator password?

  Original title: imn locked out of my computer laptop windows 7. request a password or a reset disk.

  I have a recovery disk and its does not work and is locked me and tried the function StickyKeys and that no longer works

  I have a recovery disk and its does not work and is locked me and tried the function StickyKeys and that no longer works

  There are a lot of options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create a keyfile and if it is common).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)
  The post-its feature key is assistance to persons with disabilities. You cannot use to reset a password. If you could, what purpose is there to have a password?

• How to connect to the computer without administrator privileges?

  Original title: question administrator

  I don't have the admin rights even if I'm the only one using the machine. I accidentally deleted the Administrator profiles, I created and the default admin was left disabled and I don't remember giving it a password.

  I can't raise any application or change the permission of my profile.
  When I try, I have the window UAC which has the "Yes" button grayed out.
  When I go to computer management > users and local groups to change the properties of the profiles I get 'access denied '.

  I tried running with the system in mode safe but still can't find a way to get the elevation or change my authorization to administrator.
  When I get to safe mode and Admin profile appears on the list and I get to click, restart the system.
  It doesn't matter if all the services.msc a services property gray buttons? Is something wrong with the services?

  I accidentally deleted the Administrator profile

  Delete the only and only the administrator account would be equivalent to throw one and only safe key you have. Here's how you can recover from this error:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you removed your admin account.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• How to connect to the database without sqlclient soa

  Hi all

  I have a very simple question.

  I need to write a shell script to get some stats for bpel instances of database as part of the daily health check.

  The problem is in our area of unix server, any customer database is not installed.

  Sql client is present as part of the installation of SOA that we can use to create the connection to the database? or by any mode of access to the shell database.

  Thanks in advance,

  Bob

  Hi Bob, there.

  most of the components in the FMW stack including SOA infrastructure rely on pure JDBC to talk to RDBMS and as I know there is no client Oracle installed in slot the FMW home (after installing SOA Suite).

  One possibility would be to use the Oracle Instant Client and use its tools from your shell scripts. It's a bit unzip and run Setup.

  HTH,

  A.

• SSXA: How it connects to Content Server as a sysadmin without password?

  Hello world
  
  We use SSXA 11.1.1.5. The documentation says that SSXA engine accesses the content as a user admin server internally:

  the adminUser userId is used to extract the data from the content server file and store it in the Studio of Site for external Applications cache.

  With little investigation, we found that the admin user is configured in the configuration file wcm - config.xml:

  <contentServer connectionName="MyPortal" adminUser="sysadmin"/>

  However, we are confused because no password is necessary. (In fact, the XML < contentServer > element has an attribute called "adminPassword" but it does not matter what we put in it - the continuous SSXA engine to run. The user interface does not include a password either, field that makes us think that this attribute is deprecated).
  
  Could someone explain to me how SSXA connects to the content without password server? If it uses some special API that does not require a password, it's a security breach?
  
  Thank you
  Dimitar

  It uses the remote Client of Intradoc (IDRC). http://download.Oracle.com/docs/CD/E14571_01/doc.1111/e16819/toc.htm

  It is not a security hole because there is a UCM configuration parameter called SocketHostAddressSecurityFilter that determines which network addresses are allowed to use CRMI.

  Jonathan
  http://redstonecontentsolutions.com
  http://corecontentonly.com

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• How to connect laptop to plasma display

  I have a laptop of Lenovo, which has VGA and USb ports but not HDMI. My LG plasma 50' has HDMI ports. How to connect my laptop to the TV. I used a cable USB to HDMI, but the TV kept showing no Signal and portable USB port showed peripheral unknown. Help PLZ

  Earlier, I used a HDMI VGA cable but I faced the same problem.

  Hello

  see if that helps you

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

• How to connect laptop Insperon 1525 to my flat screen TV?

  Original title: help im seriously disappointed on the compatibility of the technology today

  I have an inspiron 1525 computer windows vista laptop and I want to connect to my phillips flatcreen as ive done in the past I have updated my graphics driver and tried to change the resolution settings but nothing I seem to solve the problem ive read everything on the web and none of it helped me tv Wizard does not detect my TV either this is my last resort please help

  Hello

  Read these?

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

• How to connect a portable Sony Bravia TV Vista

  I want to connect my laptop to my tv (Sony Bravia, mod KDF - 50E3000), so that I can read documents of text on the screen or play games on the tv from my laptop.  I bought a HDMI VGA cable and hung the two units through this means of communication.  I also used an "S-vidéo" cable and got a few lines and movement, but no readable signal.  The TV's user manual says to change my signal video output on the laptop, but I can't find where to do.  Can you help me to get this accomplished?

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  Read the info on the links above.

  See if that solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner