How to connect the new monitor dvi to vga port
Today taken a new Samsung BX2240X monitor and it has ports dvi or vga, computer has just vga. Can I use an adapter or a new video card is necessary. Computer Compaq 4010 is a pci express slot on the mobo. The PSU is 220w and the + 12V - 16 Hope a. I gave enough information sure Big Dave will be my response makes a male vga adapter to dvi female, but the PIN to dvi outputs look like mine.
The best picture would be obtained using a video card with DVI connector.
Tags: HP Desktops
Similar Questions
-
How to connect the external monitor to Satellite T130-C17?
It has a HDMI port on my laptop and I would use it to connect to a monitor...
The monitor supports DVI and VGA...
So I thought that buying a VGA-HDMI would do the trick...Unfortunately, when I plug it almost doesn t do something...
I want to use the monitor as my monitor 3rd btw. That's why I want it on the HDMI port.
The resolution isn't really a problem for me because I put t want to do something great graphics on it anyway.For me, it makes sense to use the HDMI Cable DVI and not to use the VGA port.
This third monitor is a little strange to me.
You want to connect two external screens/monitors to your laptop satellite? -
How to connect the new laptop to the router?
Hello. Have the new netbook from toshiba. How can I connect my router to the main computer. I just connect a LAN cable, or is it more complicated than that? M
Hello!
Normally it of enough if you connect the cable to the router. The rest depends on your network configuration you have. If you have a DHCP and DNS server you automatically get an address otherwise, you must choose an address.
Good bye
-
WT8-B-102 - how to connect the external monitor
Hello
I have a toshiba WT8-B-102 Tablet and I need to connect an external monitor (vga or hdmi).
My tablet doesn't have an hdmi port.Any solution?
Best regards
FranciscoHello
WT8-B-102 does not therefore support other output micro HDMI port the connection to an external monitor or TV isn t possible.
But as far as I know the Tablet supports the wireless display technology (Miracast / Intel WiDi) and if the TV supports the same technology, you should be able to output the internal display on TV s screen too.
-
How to connect the external monitor for Qosmio G30 with a HDMI cable
Hello
I have G30 also I have Samsung 32 LCD screen LA32S8
I have the HDMI cable. I'm trying to connect the Qosmio G30 with the LCD screen and watch nothing displayed.I would also like to ask;
Can I use the LCD screen as a monitor for laptop or I plug it into the PC output?THX and I need this help.
Hello
1. attach a TV or monitor to the Qosmio G30 HDMI while both units are in a State "turned off the power.
2. turn on the TV or monitor first and then the Qosmio G30.
3 Qosmio G30 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV or monitor.Check it out
-
Hey I lost an external hard drive with a lot of work on this subject, the catologs are on the main computer, in the image files... when I go on the external hard drive icon I get previews and selects so im assuming that this info is on the main computer... So I cf cards original for a lot of this stuff... is it possible to connect them so that I don't need to re - edit four years of stuff... I'm using a mac osx 10.9.5 his lightroom 5... any ideas?
As I said earlier, you copy the files to the card from the camera to the new external drive with the HELP of YOUR OPERATING SYSTEM. This isn't an action of Lightroom. Files are in the same exact files than before on the old external hard drive.
-
How to connect the physical monitor in a virtual machine?
I connected a monitor of my laptop, I want to use this screen for my virtual machine running Windows 7, so the virtual machine runs in fullscreen display them on the monitor and not on my laptop. Is this possible? I'm using Vmware workstation.
WS = Vmware Workstation
Your laptop must be supported using the second monitor as an extension on the desktop, only not in mirror as it does now. This is done from your video settings, has nothing to do with VMWare.
Go into your video settings and see if the monitor shows up as Monitor #2, then look for a setting to put it right (or left) of your laptop monitor. My Thinkpad supports this mode.
Check with the manufacturer of your laptop if necessary. Lou
-
I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.
Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)
Supposedly this monitor can connect to the video card, you have the HDMI connection. Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second. I got this from the description of the video card on THIS page.
Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)
-
I have a Macbook Pro (non-retina display) mid-2012. I have a mini VGA screen that worked throughout the year and all of a sudden, it doesn't seem to work. My computer recognizes the new monitor (screen flickers and flies all content secondary screen) but the projector does not display anything. I tried to reconnect the cable, the cable VGA switch to turn on the projector and turn off, restart my computer and clouds of dust on the connections. Sometimes if I move the connection just that will work, but if I so much as breathe on it or watch funny it stops and I can't get it back.
Jiggle the cable or adapter is something different, you have a physical adapter or cable problem. Any bit-reversal can help that.
-
How to connect a new MacBook in my time for the initial file transfer capsule
How to connect a new MacBook to my existing time capsule to transfer files as part of the first implementation of my MacBook?
You say that you have a new MacBook and that you have posted to the forum for the retina MacBook 12 "section, but your tag indicates that you have a MacBook Pro. Please specify.
-
How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor
Hello
How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor?
Are there any adapter or cable that can help?
Concerning
M
PCs have no support for the target Display Mode.
-
How to connect an additional monitor for the gateway all-in-one?
Hello you all, I have a question I hope you a lot more smarter computer people can help me with. I have a friend who has a gateway all in one model #-ZX4931. It has a VGA port on the back. It has been also updated for Windows 10. I'm house sitting and dog looking for her in a few weeks
I want to plug the additional monitor which by the way, it's a Dell (sorry) to work on a project I'am doing right now. I try to use the screen that she has on the All In One and I didn't like how my project came out looking
I see on the back of its All In One, it has a VGA port. I Google several times and different words from Google, which told me that you cannot plug an additional external monitor for all in one PC, so I'm confused as to why there is a VGA port, if you couldn't plug the external monitor
in any case, can someone please help me and give me details on how to connect an external monitor, in addition to its gateway all in one model #-ZX4931
Looking at your specific model, I think you can try to connect an external monitor via the VGA port.
Once you have connected the secondary monitor using the VGA port, press control + p and main Windows logo if you are able to extend or clone your desktop.
-
RWhen I try to hang a new monitor with VGA computer cable runs and gives me the BIOS display then it starts to load microsoft. After a few seconds (maybe 30) it says no "supported" thanks for any help.
Kraggyemember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
It's good to hear - it means that the monitor is OK and that it is compatible with Vista. It is still unclear on the video card or the motherboard on the computer (or any other problem this computer might have) = but one step at a time. You have made great strides and ruled out several possible causes that we must now check or test.
What is the EXACT error message you are getting (Word for Word)? Which is the key to product, the manufacturer, brand, model and serial number or your computer (I assume it's using the original video card)? What i the manufacturer, brand and model of the new monitor?
Even if you could get the Microsoft drivers (which I don't think you can), you should take them to the device manufacturer or the manufacturer of the computer, if they moved on the computer. They are likely to be more current and have fewer problems. And you want drivers, firmware and software necessary or required by the device (they will be either the list which is available or you can ask for help and they should direct you to what you need). Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears. Check each device to a red x, yellow! or white? These identify devices with problems probably (drivers, but also of conflict or something else). Click on each for more details and troubleshooting tips. If you need to get drivers (and you shouldget to the monitor, the video card and the motherboard and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates). In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm. Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.
I hope that drivers will solve the problem. If not, we have to try something else (not sure what yet, but we will come with an option).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How to connect the URL of Web site companies existing on the new site I've built?
How to connect the URL of Web site companies existing on the new site I've built?
Hello
If you want to use the current domain with your new business catalyst site, please follow this link
Let me know if you have any question.
-
Original title: connect Windows 7 to the output of user profiles?
I want to reinstall Windows
My user profiles are on a separate HARD diskIs it possible to connect the new install of Win 7 to these existing profilesOr I'll create all new profiles and just move all the files manually?You can change the registry so that it points to your old profile folder. However, I suspect that this would cause problems because the SID and many registry keys would be incorrect for the current installation. I would like to move the folders manually.
Maybe you are looking for
-
I have to open a firefox page to access favorite and I want to be able to do this directly from my office
-
Journal of Gmail just cautioned refreshing page password
FF 38.0.1, when trying to connect to gmail password just page keeps reloading, the same user/pass works 100% in safari.10.9.5 OSX 100% until a few days ago believe it is updated and then, if I remember well I put the safety of low to Med.
-
When I click on Yahoo in FF, the page is slow to load. When this happens, email is still slower to load. When it does not load and I click on an e-mail message, the message does not open. Any suggestions? If I delete FF and reinstall it, I'll lose al
-
Everything I print gets stuck in the queue, but the document is printed
ORIGINAL TITLE: Spooler I installed a printer on a pc windows 7 64. Everything I print gets stuck in the queue, but the document is printed. The printer is on the network, I tried to restart the spooler and erased the record of the spooler, but peris
-
My PS screen malfunctioned and screen resolution is poor. Help me please!
My PC is plugged into a surge protector. There was a power failure, and I've been shielded blue. I solved the problem of blue screen but now my screen is due to a malfunction. I don't know if my video card is no longer after but doubt that as long as