How to connect the port device series to the Blackberry without Martin Simulator
Is there a program that can interface with the Blackberry Simulator to connect to a device connected to the serial port of the computer to simulate a Bluetooth connection? I can't believe that Martin is the only way to do it. Martin offers a free demo version sort of their program? I searched everywhere but found no one. I don't need a bluetooth receiver real but just the software in order to supply data from serial port to the Simulator (and I guess that convince the Simulator data from serial port to a Bluetooth device). Thanks for any help that anyone can provide.
I'm not aware of any device that will help with this.
Two suggestions:
(a) you can write some sort of test, that will feed a data script as if it came from a Bluetooth device. I got it done in the past - it does not test the treatment of Bluetooth, but it allows you to drive the application program.
(b) it is not really difficult to test on the device. Little painful to recompile and reload, but if you have a test drilling (a), then you are only testing the Bluetooth part, which you won't be able to test a connection series anyway.
Tags: BlackBerry Developers
Similar Questions
-
Satellite M40X-189: how to connect RGB port to port RS232?
Hello
as you know the satellite M40X - 189 P - M 730/XP has a port monitor RGP and doesn't have a RS232 port.
I work with device of automatic titration requiring the RS232 port for connection!
No idea how I can connect my laptop on this unit!pls help
Thank you
OmranklHello
AFAIK the RS-232 port is a serial port and I don t think that it of possible to connect the RGB port to the RS232 port.
But I found the site useful:
http://www.Ontrak.NET/USB.htmYou will find a description how to connect the USB port to an RS-232 port.
You need an interface ADU.
Click on the link. -
Tecra M2: How to connect on port DVI - D LCD with DVI - I and at 1600 x 1200
My Toshiba Tecra M2 has a GeForce FX go5200. Docking station has a DVI - D port.
I want to use an external LCD screen which is equipped with a DVI - I port.
When you connect a DVI - D cable to the DVI - D between the ports and monitor Replicator and if I set to 1600 x 1200 which is desired (and support for the resolution of the screen) then the display does not fit in the liquid crystal display and therefore the screen starts to pan.
If I use a (next to the PC) VGA / DVI - I (next to the screen) cable then I wanted resolution of 1600 x 1200.
Please advise so how:
Connect the Port DVI - D from Toshiba to LCD with DVI - I and at 1600 x 1200.
Help, please...
Hello
I agree with Tom.
I visited the Toshiba knowledge base and found this FAQ:Max. Resolution DVI - D on Advanced Port Replikator II III & Tecra M1 and M2
http://support.toshiba-tro.de/KB0/TSB4900S10001R01.htmPS: This database is really useful. I found very interesting material. Everyone should use it.
-
How to connect the slot button Cascades
I am new to waterfalls and QML and yesterday I tried to port native QtWidget app to waterfalls, but it does not. The problem is, I add some buttons to the container in QML main file and coded my custom slot function which should be executed when the user click some button. But I don't know how to connect the clicked() signal to my function from the custom location.
When using
Connect (CloseButton, signal(Button::clicked()),this,slot(on_closeButton_clicked()));) or connect (exitButton, SIGNAL (clicked ()), this, SLOT (on_exitButton_clicked ())); I get error "unable to connect SIGNAL (null) to SLOT (on_closeButton_clicked ()) ' on all the buttons.
Here is my code in app.cpp
App::App() { QmlDocument *qml = QmlDocument::create("main.qml"); qml->setContextProperty("cs", this); AbstractPane *root = qml->createRootNode
(); Application::setScene(root); textHolder = root->findChild And qml
import bb.cascades 1.0 Page { id: mainPage content: Container { id: main Container { id: buttonHolder scrollMode: ScrollMode.None layout: StackLayout { layoutDirection: LayoutDirection.LeftToRight leftPadding: 5.0 rightPadding: 5.0 topPadding: 5.0 bottomPadding: 5.0 } touchPropagationMode: TouchPropagationMode.None objectName: "buttonHolder" Button { id: openButton text: "Open" } Button { id: closeButton text: "Close" onClicked: { } } Button { id: saveButton text: "Save" onClicked: { } } Button { id: saveAsButton text: "Save As" onClicked: { } } Button { id: exitButton text: "Exit" } } //******************************** Container { id: textHolderArea layout: AbsoluteLayout { } topMargin: 5.0 leftMargin: 1.0 rightMargin: 1.0 bottomMargin: 2.0 TextArea { id: textHolder textStyle.fontStyleHint: FontStyleHint.Default layoutProperties: AbsoluteLayoutProperties { } leftMargin: 5.0 rightMargin: 5.0 preferredHeight: 645.0 textStyle.justification: TextJustification.Enabled objectName: "textHolder" text: "" } } //******************************** } }
And I have no idea how call my app.cpp C++ slot in my main QML file
Your buttons should an objectName set to be visible to C++, the id is only visible inside the QML.
-
How to connect the bluetooth iball-groovy head game
How to connect the bluetooth iball-groovy head game
Hi Gurushankar,
You can consult the following articles and check.
Connect to Bluetooth and other wireless or network devices
Add a Bluetooth device or other wireless or network device: frequently asked questions
Hope this information helps.
-
How to connect the akai ATT01U
How to connect the Akai ATT01U with my PC? (Windows 7)
Johan Burgman
With the supplied USB cable, I guess. You probably have to install the software provided with the unit first. Check job mode, manual quick start or any documentation that came with the device.
-
I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.
Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)
Supposedly this monitor can connect to the video card, you have the HDMI connection. Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second. I got this from the description of the video card on THIS page.
Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)
-
How to connect the keyboard for apple tv wireless?
How to connect the keyboard for apple tv wireless?
If you mean the 4th generation new Apple Tv, you cannot currently. It does not support keyboards at this time.
If you mean the 3rd generation Apple Tv:
Use a keyboard Apple Wireless with your Apple TV (2nd or 3rd generation) - Apple supported
-
How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor
Hello
How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor?
Are there any adapter or cable that can help?
Concerning
M
PCs have no support for the target Display Mode.
-
How to connect the HP Officejet Pro 8610 to a laptop that does not connect to internet
Just bought the HP all-in-one Officejet Pro 8610 for the local historical society. The laptop and the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.
I just removed the instruction manual to familiarize myself with the connection procedure, but I noticed there are several references that require internet access.
Is there a workaround solution that allows me to install/connect the printer without having to access the internet?
Thanks in advance for your help.
Hello
Given a special environment USB is probably the way to go. You don't need a special USB cable. Your printer has two USB ports, one on the front (#4) and the other at the back. You must use the rear USB port (#13)
And the USB cable is similar to the following:
The "flat" end for your computer/laptop and 'round' (well almost round) is for the printer. Please check the box first, depending on where you are (country, region), the cable may already be inside the box.
Kind regards.
-
How to start the assessment without a device
Hello
I downloaded the evaluation version.
How to start the assessment without a device?
Thank you
DV63
Hi DV63,
Welcome to the Forums EITHER!
If you downloaded an evaluation version of LabVIEW your 30 day trial must begin immediately after being invited to enter a serial number. You can choose not to enter a serial number and this will begin your trial period. I recommend that you install OR-DAQmx device drivers; It is a software that allows you to communicate with the hardware from National Instruments DAQ. However, this facility will be particularly useful because it allows you to simulate an Instrument with the measurement and Automation Explorer (MAX); This means that you can immediately start the signals in LabVIEW.
-
How to connect the value of the input string to numeric values
Hello
I'm trying to figure out how to connect the value of unique user input string to numeric values. Basically I want the user to enter the name of a gas that I have a list for (I think I put the list of gases in a table >). Then I want to match numeric values 2 'a' and 'b', according to which gas, name of the user has set. These 'a' and 'b' values will be automatically matched with the name of the gas in a list that I put. For example, hydrogen gas has the value 3 for "a" and 4 for "b. when the user puts the ' hydrogen' name in a string constant, automatically 'a' and 'b' must be issued.» I have connect a and b to a formula
Thanks for any help
Hello
It is perhaps not exactly what you are looking for, but perhaps you could use the enumerated data type and the array of clusters of points (a, b).
Look at the VI I enclose.
-
How to connect the Officejet Pro 8100 printer to wireless network
Bought a "nine" Officejet Pro 8100 and want to use via my wireless network. The CD supplied with the printer is obsolete. Updated Apple software but can't see how to connect the printer to the network. Getting Started Guide is no help on this issue. Searched for support without result pages. Utility HP does not provide a method to set up a wireless feature. Find all the instructions, I say first of all make sure that the printer is connected to the wireless network, and that's what I can't find out how. What I forget?
Finally, I called HP hotline for help and was rescued. It turns out that Apple's software update software includes all the required components. The software from the HP Web site is no longer available. It's frustrating to see the Getting Started Guide refer frequently to the HP installation wizard and be unable to locate it. Once the wizard tech took control of my computer and installed the necessary software, it was a breeze!
I also note that compose the support number to talk with a guy was rather brief: between 1 and 2 minutes, I recall. Although there was a menu of the phone, it was not a large (unlike the attempt labyrinthine and often circular to locate the online help).
Insofar as HP knows the necessary software in not available via software update or directly from HP, wouldn't make sense to inform buyers, as well as how to access? At least do not place meaningless, useless on the Web site links that lead into oblivion and frustration!
Although I did appreciate the journey, I finally arrive at my destination. Thanks to Aris, HP technician. You are exceptional!
-
How to connect the printer wireless hp with the computer?
* - Original title - the printer printing
How to connect the printer wireless hp with the computer?
HP all what you need to be able to complete the task... See here...
http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html
-
Is there anyone know how to connect the "HP PSC 2355 all in one for iPhone 4S?
Is there anyone know how to connect the "HP PSC 2355 all in one for iPhone 4S?
Hello
First of all, please check if your printer in the list:
http://support.Apple.com/kb/ht4356
If so, you can use this hotfix/install:
iPhone: http://www.Apple.com/support/iPhone/Assistant/AirPrint/
If NOT you must print using other applications (if applicable) such as
http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8
Kind regards.
Maybe you are looking for
-
trying to erase a movie to a DVD/RW
I downloaded a movie on a DVD/RW and I can't remove it from the DVD, can anyone help please
-
BlackBerry Smartphones how do I enlarge the size of the clock on the home screen?
New to BB. Just got a new 9630 Sprint of my employer. How do I enlarge the clock on the home screen? I can't see the dang thing. Thank you
-
How I could recover the Dell Center's Support, Internet Explorer and Recycle Bin Icons?
I have a click with the right button on desktop, click on customize, click Change desktop icons, and clicked on restore by default as advised by you. However, nothing happened. Could provide you an alternative? Trash is very Important and I don't kno
-
Sony Ericsson W595 USB Ethernet problem...
I have a Sony Ericsson W595. There is an option in the phone which allows me to use the PC internet on the phone. However, when I use the USB Ethernet mode, can't do internet on the phone. In Network Center, it says 'Public unidentified network'. Usi
-
When windows media player will be able to play blu - ray?
One might think that in the 21st century windows media player keep upward over time. Of course I can buy the software from someone else, but why should I?