How to connect two screens on a PC with a VGA splitter

Similar Questions

• How to connect 2 screens on a HPE-210y PC?

  How to connect 2 monitors to a HPE-210y PC? I have 2 monitors HP2010i . Behind the PC, there is a VGA - DVI input and an HDMI input. I have connected a monitor to the PC with a VGA - DVI adapter. I saw a VGA input which was covered with a plastic plate "DO NOT REMOVE" black screwed attached. I removed the plate and the second monitor connected.

  The second monitor keeps saying "No Signal" and goes to sleep. I tried the monitor plugs around switching, but I keep getting the same results. Only the monitor connected to the VGA - DVI input works.

  How can I connect two monitors to this PC?

  Thank you

  You must also use the HDMI port. To do this, you need an adapter DVI HDMI and a DVI cable.

  The other VGA port has been covered for a reason, to keep you to try what you did. When a graphics card is used, the video port of the motherboard is disabled.

  See you soon,.

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.

• How to connect two harddiscs in a computer

  I don't know what's going to happen if I connect the

  hOW to connect two harddiscs in a computer

  http://US.yhs4.Search.yahoo.com/YHS/Search?p=How+to+Connect+Two+harddiscs+in+One+Computer&fr=AltaVista&FR2=SFP&iscqry=

  http://www.google.com/#hl=en&output=search&sclient=psy-ab&q=how+to+connect+two+hard+disks+in+one+computer&oq=how+to+connect+two+harddiscs+in+one+computer&gs_l=hp.1.0.0i13i30.3151.3151.0.7535.1.1.0.0.0.0.224.224.2-1.1.0...0.0...1c.b0ubsyG8v-w&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=5b25e3ab4ae8856e&biw=833&bih=548

  UTC/GMT is 17:27 on Wednesday, August 8, 2012

• How to connect two clips?

  Okay, I'm making progress - but I don't know how to connect two or more items.

  Patrick

  Thanks for the reply.

  Could you clarify... Once you've created your content of chronology...

  When you said made it... do you want to say that you pressed the button made above the timeline in order to obtain the best possible overview

  or were you using the go Word to signify that you have exported the content of the timeline to one of the categories under publish + share/computer?

  If you have exported (saved) via Publish + share/computer/and other categories, the export dialog box has a Save In: location. And you will find

  your file exported to this place (you can change to one of your choice for the default location).

  

  If you save the project (.prel) file without exporting, you can find the file of the project in several ways. Means the faster would be to

  Hold the cursor of the mouse on the name of the project (top right of the workspace Expert), and the path to the project file should be revealed to you.

  

  I demo had this to 12 (13 won't get installed until Tuesday). But, same idea 12 or 13.

  Guided tutorials did you use for your excellent results? All or one in particular?

  You can go further with free learning tools and the use of exploration and experimentation.

  The possibilities of creation using Premiere Elements are endless.

  Best wishes

  RTA

• How to connect two databases on two servers

  How to connect two databases on two servers. For example
  a serevr is in India and another in Australia.
  The following example is correct or not
  
  Select A.ID, B.Name [10.50.17.87] .HR. EMP A, [192.168.100.125] .HR. TRANS B
  Where A.ID = B.ID

  You must use a database for this link. The syntax is defined in the reference SQL here: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_5005.htm#SQLRF01205

• How to connect two databases to a single listener

  Hello
  
  How to connect two databases to a listener.is it is possible or not

  Hello

  Yes, you can record a single listener to respond to several databases. There are several ways to do it and the best way that I would suggest for you is the use of "Network Setup Wizard" or "netca", which is a graphical interface that allows you to meet your requirement. Otherwise, you can hardcode in your listener.ora file located in the 'ORACLE_HOME/network/admin/listener.ora '.

  Example is as follows

  Listener.ora

  SCREW =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = lab01) (PORT = 1521))
  )
  )

  SID_LIST_VIS =
  (SID_LIST =
  -1 database configuration
  *(SID_DESC =*)
  * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
  * (SID_NAME = DB1) *.
  *)*
  -Database Setup 2
  *(SID_DESC =*)
  * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
  * (SID_NAME = DB2). *
  *)*
  )

  Then restart your listener.

  Kind regards
  Asif Muhammad

• How to connect to a Windows 2003 server with a domain from a Win7 pc

  How to connect to a Windows 2003 server with a domain from a Win7 pc

  Hello MikeYoungblood,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• How to connect my Blackberry and my computer with Bluetooth?

  I was wondering how to connect my blackberry and my computer with bluetooth and I tried, but he will not find my device. I don't know how check that the Bluetooth software included with Windows.

  Hello

  ·        Who is the manufacturer of the system and what is the model?

  I suggest you to consult the tutorial that is mentioned below. You also have a section that tells you how to check that the Bluetooth software included with Windows. If your system has been installed on the Bluetooth system then the icon will appear in the notification area. If this isn't the case, you must install the Bluetooth drivers on the system.

  How to set up Bluetooth connectivity between a smart phone BlackBerry and BlackBerry Desktop Manager

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04132

  I suggest you return the item mentioned below.

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't connect my pc to my tv with a vga cable - please advise.

  I can't connect my pc to my tv with a vga cable - please advise.

  Hi SuzieKK,

  Cables VGA, DVI and component video don't support audio signals. However, HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separate from their computer directly to the TV card. Otherwise, you need to connect the audio signal to a different device, such as external speakers or your stereo.

  You can see the following article for more information on connecting your computer to a TV:

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  Let us know if that helps.

• How can I connect two screens for MacBook Air (mid-2012)

  I have a macbook air (mid-2012) which, according to apple, can support two external displays.  I have an external display connected to the thunderbolt port, but may not know how to connect to the other?  The mac has only a thunderbolt port?  It has two usb ports.  Is there a thunderbolt display port separator that works with this Apple?  When I look on amazon I see some who make the separation, but they say that they do not work with the Mac?  Any recommendations would be greatly appreciated.  Thank you in advance!

  You can daisy chain a thunderbolt cable from the first screen to a second screen to support both with port of a sudden lightning. Reported here.

• How can I connect two screens for MacBook Air?

  I have a macbook air (mid-2012) which, according to apple, can support two external displays.  I have an external display connected to the thunderbolt port, but may not know how to connect to the other?  The mac has only a thunderbolt port?  It has two usb ports.  Is there a thunderbolt display port separator that works with this Apple?  When I look on amazon I see some who make the separation, but they say that they do not work with the Mac?  Any recommendations would be greatly appreciated.  Thank you in advance!

  I accidentally listed the issue as resolved, but it is not.  Thank you for all the advice!

  Hello..

  You need a hub of Thunderbolt.

  Try Amazon.

• Want to connect two screens on a desk AXC-603-ur10, what should I do?

  I have two monitors with DVI inputs Dell, currently I have one connected to my HDMI port and still have the free VGA port (as well as USB 3.0). How to connect a second monitor to work off of? Do I need to buy? I tried to pick up a female adapter DVI to VGA HD15 male that I ran a cable from the monitor, but the second monitor does not display anything. I tried windows + p and could not get anything on the second monitor. When I changed from one monitor to the other HDMI cable the monitor worked, but always one at a time. Any suggestion would be appreciated. Thank you.

  Sorry your having problems with your screens...

  I have an AXC 603 I throw that multi monitor on... However for your problem I think the question is your d - Sub to DVI connection.

  I guess you are trying to connect an analogue to a digital input. If this is the case, you would need a special adapter that can cost from 60 to 150 depending on where you buy... in this case it is best to just get a different view. Or unfortunately buy another computer.

  So the question is why would adapter XYZ of sale you have? In short to pass a system A DVI or DVI-i/VGA unfortunately without the special conversion display cannot see the analogue

  I have my sytem with old Sub-d/VGA, VGA and the second port using the HDMI to HDMI interface... It worked with number on all my system I have connected this way. I have a little... Also have a couple that are located on a Tripple screen but not the question here...

  Hope this helps some

  James

• How to connect two computers and LAN

  I can't get my toshiba to interface with my desktop computer or to connect to the internet via a CAT5.
  I tried everything I know.

  I'm not too sure about the LAN MAC? He just will not connect even if the device is functioning properly.

  Any ideas?

  Here are the instructions how can connect the two computers.

  -First of all, you will need to disable the firewall.
  -Then you need to set the same workgroup on both computers
  -in the Lan Card Properties-> Protocol TCP/IP settings, you must assign the IP address manually. That is, a computer must use the 192.186.50.1 ip address and the other computer must be set to 192.186.50.2.
  -MAC address is fixed and cannot be changed. Each LAN card uses unique mac address

  After these settings, you must restart the portable computers (computers)

  PS: I recommend Google for details and further instructions.

• How to connect two wireless laptop to an unsecured internet connection

  me and my friend. We have detected a wireless network of neighborhood, it is able to connect, but I can't

  How to connect wirelessly

  MR. PHILIPPE,

  Make sure you have your wireless card install correctly on your computer. If you have a laptop then you have a wireless card already in the machine.

  That's all need you. Go to start > Control Panel > network connections, here it takes a current wireless connection. If no, you must install you wireless drivers from the manufacturing of the Wireless card in the computer. (Linksys, Netgear ext...)

  Please rate me upward if you find my post helpful. Thank you!