How to convert image HAVE layer extruded in AE

Similar Questions

• How to convert images to Grayscale black and white

  I don't have a scanner.  When I need to analyze something, I place under a piece of glass and shoot with my digital camera, then transfer the file jpg on my PC.  My "scans" interpreted that way many pages of text n & B, so the jpg that results is enough grayscle; because I do not use an official copystand there are a good amount of shadow in the image.  It is quite easy to desaturate these images so there is no color in them, but there are still a lot of tweaking if I want to remove the shadows and the end upward with an image strictly B & W.  It seems to me that there should be a filter that allows me to set a threshold such that everything above the level is rendered in form of black (or white), and everything else is rendered as white (or black).  If so, what is it?  Thank you.

  Am_I_Lame? wrote:

  each pixel beyond a certain level in an image desatruated in white and the rest black

  Image > adjust > threshold for this. But I am pretty sure that is not what you want, the result will be crap.

  I would use levels to set the white and black points and then curves to increase the contrast. You can do both with curves, but endpoints are not as easy to spot there.

• How to convert pictures that I enter a PDF file to text?

  Also, would you happen to know how to convert images come in a PDF file to text? (I can't use OCR if the text already exists on this page of the document)

  Directly, you can't. You need to remove all the text on the page to run OCR.

  There is a solution that could help you. Ideationizing: how to remove the text will extract to. PDF files to OCR

• How to convert photo/image in text

  Hello

  I want to scan (binary 1 or 0) of any photo/image. After the digitization of photos/images, I want to write to a text file.

  Please advice me how I can do.

  Thank you very much

  Azim

  Hello azeem,

  I recommend you have a look at our examples of Developer Zone and NO community because they have several communications that relate to what you're trying to do.

  Here are some examples I found simply searching "Images to Binary.

  [1] acquire Images from the camera and save them in a binary file

  https://decibel.NI.com/content/docs/doc-20952

  [2] convert Image into binary Image

  https://decibel.NI.com/content/docs/doc-8735

  [3] image streaming to a binary file (with delay)

  http://www.NI.com/white-paper/14173/en

• How to convert U32 matrix 8-bit grayscale image?

  Good day to all,

  I got a U32 512 * 512 data table of photomultiplier using the analog inputs of the DAQ card. My question is how to convert this matrix 32-bit to 8-bit monochrome image for display.

  I tried the method in this post to convert grayscale image https://decibel.ni.com/content/docs/DOC-4155 table but the result resembles an outline rather than the actual image. I guess that's because their contribution to flatten Pixmap is 8 bits, but mine is 32-bit. I have a gamma correction to the scale of my data? But how?

  I have attached the original image, which is a particle. I have also attached my labview code and the processed image.  Thank you!

  Then, you will likely make you own custom conversion then increasing the difference between the brightest and darkest. You could just do 4294963840 the zero and 4293967276 the max and scale up to 0-255

• How to convert specific images on my Clipboard to text once paste the picture on my .pdf document?

  Hey Adobe experts, I could really use your help.

  I have some screenshots of school I pasted on OneNote. These screenshots have a large amount of text that I could use. I created a large .pDF document where I saved my notes and text. Now - how to convert the SPECIFIC images that I stick to the text document? I use the word 'Specific' here because I know I can run OCR on a blank page without any text. But how to do OCR on an image

  It automatically happened a couple of times when I tried to save the document immediately after I pasted the image - when I was under "Edit PDF" I was able to edit and change the fonts of the text. But how can I do this at will? Is there a special button somewhere?

  P.S. I already tried to OCR - but it's only limited to pages without already "renderable text".

  I use Adobe Acrobat Pro DC; 8.1 Windows machine

  Hi SinNombre,

  If you are referring to perform OCR on a page with the image and the renderable text, it is not supported. However, you can use the following workaround for the same thing:

  1. print the PDF document to Microsoft XPS Document Writer or accessing the file-> export to...-> Image-> (an example of TIFF or PNG format)

  2 convert the output created in PDF format. This PDF file contains all the texts and images in the form of images.

  3. run the OCR on this PDF.

  This should solve your problem

• How to convert an image from 72 dpi to 300 dpi image?

  How to convert an image from 72 dpi to 300 dpi image?

  Ctrl Alt of the image size I have (Cmd Opt i)

  Uncheck resampling

  Change the resolution

• How to extract images without the layer styles?

  Hi team,

  I often work with drawings where there are images that have layer styles to add a border and rounded corners. I want to be able to export this image without these additional styles, so I can add them with CSS instead. Currently, the border and border radius are extracted with the image.

  See you soon,.

  Kilian

  Hi, Kilian-

  Unfortunately, extract CC isn't this feature at the moment. However, we would be curious how you want to see this work, and in what context you want this feature. You think you export your image and then use CSS to make the corners yourself?

  Thank you

  -Elaine

• How to convert a layer back to the text "T? He is currently uneditable (how did that happen?).

  How to convert a layer back to the text "T? He is currently uneditable and I want to change the font (also, how what happened?).

  According to your layers panel. The top layer is a text layer years the second layer is a raster layer. A raster layer once the case has been closed, cannot be cancelled. It will have to be re-created. If for some reason, you left the file open, then it is perhaps possible to cancel it, because it would show in the history stack. But by default that stack is set to 20 States, to more than 20 he would push the battery.

  I think that you have to bite the bullet and redo this layer.

• How to convert an image large parts of images? means split a jpg to several sub vivid image. (this sub image can partner in this big picture)

  Hi friends...

  How to convert an image large parts of images? means split a jpg to several sub vivid image. (this subimages can partner in this great image) any help

  

  In the example, I created both images and them added together, and the reverse can be done in the same way.

• I have a HP Vista. My default Word in WordPad documents. How to make spelling and other bars and how to convert to the basic Word.

  I have a HP Vista. My default Word automatically with WordPad documents. It's terrible! How to spell check and other bars and how to convert to Word base. Thank you.

  Microsoft Word is installed?

  If so - what version (start it manually.)

• How to convert my RGB image or 8-bit?

  Dear Chris,

  So how to convert my image in RGB or 8 bits/channel so I can use the filter Gallery, please?

  Menu image > Mode   Check mark: RGB color and 8-bit/channel

  The title tab on your image should then show RGB/8

• How to convert a 2D Image into 3D to create a video with still photograph old 3D Photo converted video 2d style 3D (Photoshop and After Effects)

  Hello

  How to convert a 2D to 3D Image

  Create a video with always shoot in 3d

  Old Photo converted to 3D as video 2d

  (Photoshop and After Effects)

  Thank you

  It's called a cinemagraphs.com. You slice the image in the foreground and background elements, plug the holes and then place them in a 3D space - in after effects or a 3D program, no PS

  Mylenium

• Hello, I have a full desktop in Adobe Muse, site and I want to convert it into a version Tablet & phone, then, how would convert the site Office to Tablet & phone to copy the entire office content and site structure? Thanks for any help.

  Hello, I have a full desktop in Adobe Muse, site and I want to convert it into a version Tablet & phone, then, how would convert the site Office to Tablet & phone to copy the entire office content and site structure? Thanks for any help.

  You can not automatically convert. Click on the "tablet" or "Phone" at the top of your plan view to create these versions.

  You can then copy and paste on any content you want has more of your office.

• I have a protected PDF file. I have the password. How to convert to Word?  The export tool will fail because it has a password (even if the doc is open)

  I have a protected PDF file. I have the password. How to convert to Word?  The export tool will fail because it has a password (even if the doc is open)

  Hi stupiddonkey,

  You will need to remove the password from the file (using Acrobat, not reader) before you can convert it to Word. To do this, choose file > properties, and then click the Security tab choose no security in the context menu of the security method and enter the password when you are prompted.

  Best,

  Sara