How to: create a blank document and how to make a font available by editin
Two questions:
1: how to create a new PDF document? All I see is to create from an existing document or a scanner. If I created something from scratch, I really load an existing PDF, remove and then start my new document? This is as it seems, that is nuts!
2: I tried to change the text in a document. I have created no not her, but it is open to editing. The font used in the document is "Arial", a very common font that comes with windows. The font is installed and I use it all the time in other Adobe applications. However, when I try to edit a document using this font, I get a message that "the police is not available for editing" and it substitutes random fonts. Then why is it not available, and how to make it available?
Thank you!
I use Adobe Acrobat XI Pro with Adobe Creative Cloud 2014 and Windows 7, all v.11.0.10 were also updated.
I'll add to it. If you're new to Acrobat, it is possible, that you have the wrong end of things. Acrobat is not a good editor or word processor or a design tool; It does not replace your editor or word processor or your design tool. People do not only from the file > New and start putting stuff on the page. It will be limited, slow, frustrating and annoying.
People continue to put documents in all the tools they have always and use Acrobat to CONVERT to PDF format. If a change is necessary, no matter how trivial, the original is edited and redone the PDF.
The Acrobat editing tools must be used when the original is lost and backups have been eaten by termites.
There are specific reasons for wanting to a blank document, but I hope that these tips will put you in a different direction.
Tags: Acrobat
Similar Questions
-
I tried to create a Table version of the-Tablet command line just below the horizontal menu, but it creates a blank page and no content of the version of office without worrying. I cleared the table and tried several times but no result.
Just look closely at the opoins:
Here is no option to copy the content of a page
-
* Original title: printer print only symbols
Hello world
When I print a MS Word document my printer prints symbols but when I create a new document and try to print the new document of his impression. If my old document is damaged to corrupt so how do I fix it
Old documents are probably corrupt. Check out these links:
How to troubleshoot print failures in Word: https://support.microsoft.com/en-us/kb/826845
How to troubleshoot printing problems in Word: https://support.microsoft.com/en-us/kb/826862
Troubleshooting damaged in Word documents: https://support.microsoft.com/en-us/kb/918429
And this announcement in Office/Word groups is a better idea. This may very well be a FAQ here.
-
I have a new computer with Windows 7 Professional, Office 2007, Adobe XI. I just created a word document and tried save it in PDF format, but the PDF option does not appear in the menu dropdown. Any ideas please? Thank you.
What is "Adobe XI" - Reader or Acrobat?
But, "Save as Adobe PDF" is a function of Word, independent of this Adobe software, you have installed.
-
Hello
I am now able to post data to a web server by using Blackberry JDE (medical use).
Now, instead of display the plain text, I would like to send an XML file.
I am able to do it using this code on a 'normal ': Java application
import java. IO;
Org.w3c.dom import. *;
Import javax.xml.parsers. *;
Javax.xml.transform import. *;
Javax.xml.transform.dom import. *;
Javax.xml.transform.stream import. *;public class {XML
Public Shared Sub main (String [] args) {}
try {}
DocumentBuilderFactory plant = DocumentBuilderFactory.newInstance ();
DocumentBuilder builder = factory.newDocumentBuilder ();
Doc document = builder.newDocument ();
Root element = doc.createElement ("root");
doc.appendChild (root);
Child element = doc.createElement ("child");
child.setAttribute ("name", "value");
root.appendChild (child);Add a text element to the child
Text = doc.createTextNode ("text");
child.appendChild (text);implement a transformer
TRANSFAC TransformerFactory = TransformerFactory.newInstance ();
Transformer trans = transfac.newTransformer ();
trans.setOutputProperty (OutputKeys.OMIT_XML_DECLARATION, 'yes');
trans.setOutputProperty (OutputKeys.INDENT, 'yes');create the string of the xml tree
StringWriter sw = new StringWriter();
StreamResult result = new StreamResult (sw);
DOMSource source = new DOMSource (doc);
TRANS. Transform (source, result);
String xmlString = sw.toString ();
System.out.println (xmlString);
} catch (Exception e) {}
make error management
}
}
}However, on the Blackberry JDE, many functions is not recognized.
I saw the class DocumentBuilderFactory (net.rim.device.api.xml.parsers.DocumentBuilderFactory), the DocumentBuilder (net.rim.device.api.xml.parsers.DocumentBuilder) class and the interface of Document in the docs of Blackberry Java (4.2.1).
So, I'm able to create an XML Document... but I don't know how to convert to a string?
How can I do this? The TransformerFactory class doesn't seem to exist... and I did not find an alternative yet.
At the present time, here is the code I use to publish data:
String coord = lat + ";" + LNG; post data
con = (HttpConnection) Connector.open (url); Open the connection URL
con.setRequestMethod (HttpConnection.POST); POST method
con.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
out = con.openOutputStream (); display the results in a stream
out. Write (Coord.GetBytes ());responseCode = con.getResponseCode (); Send data and receive the response code
If (responseCode! = HttpConnection.HTTP_OK) {}
System.out.println ("HTTP STATUS CODE: 404"); error
} else {}
System.out.println ("HTTP STATUS CODE: 200"); successful
}
If (con! = null) con. Close; close the connection to the URLAs mentioned, rather than display a string with a delimiter between each value (there will be a lot more than two values finally), I would like to publish an XML. It will be more "elegant" and easier to parse by my code on the web server.
Maybe I don't have to convert it to a string?
In other words, how can I convert my XML Document to send it via the wireless network?
Thanks for your help!
TransformerFactory does not exist in the BlackBerry API. As far as I can tell, you need to implement yourself. You can do this by walking the DOM and the output of channels. They have an example of the market of the DOM in the XMLDemo, but they view as fields, you just need to write strings.
-
How to make a player available?
I tried to open a file in My Documents, and I received the following message is displayed:
"The drive or network connection that designates the shortcut (file name) is not available. Make sure the disk is properly inserted or the resorce network is available, and then try again."
How can I solve this problem?
Hi Gonnie Rookie,
· Since when are you facing this problem?
· Remember to make changes?
· Don't you think the question on another user account?
· This happens for a specific file?
Check to see if the following is useful.
Method 1: Try changing the location of the file and see if you get the error. Copy the file to another location on the hard drive to open it.
Method 2: Connect to the other user account and see if you get the same message. . If you don't have another account, then to create a and look for the same thing.
Method 3: Try to perform a System Restore if the problem started to occur recently.
-
How to make a program available to all users if the program was installed for a user
Basically, the problem is that I created another user account, but only a few random apps appear on it and I was REALLY looking FORWARD to having to reinstall some programs + 50 so my computer can function normally on my secondary account. I am able to find a lot of programs installed by snooping around in Explorer and have been able to run some by creating shortcuts, but many of them (Spybot, Itunes, Google Chrome, THE LIST GOES ON!) nothing do when the .exe is open and are unusable (on this account).Also, I want to say there is no page support for Windows 7 that cover this topic (that I could find by using the provided search engine), and the more those (as for windows 2000) do not apply because they tell you to move files Windows has more, but it is a known problem and Microsoft should incorporate a simple way to add or remove accounts without uninstall/install programs just to be able to check a box... _ Perhaps there could even be an option for this in a very obvious place, as installed programs list of the filth or user account settings.Emzzey wrote:
> Fundamentally, the problem is that I created another user account, but only a few
> random applications appear on it and I was REALLY looking FORWARD to having to reinstall some
> + 50 programs while my computer can run normally on my secondary account.
> I am able to find a lot of programs installed by snooping around
> Explore and have been able to run some by creating shortcuts, but a large number of
> (Spybot, Itunes, Google Chrome, THE LIST GOES ON!) don't do nothing when the .exe
endered useless (on this account).
>
>
> Also, I want to say there is no page support for Windows 7, which deal with these
> subject (that I could find using the search engine provided) and older
> (as for windows 2000) do not apply because they tell you to move files that
> Windows has more, but it's a known problem and Microsoft
> should include an easy way to add/remove programs of accounts without
> uninstall/install just to be able to check a box... _, may be
> could even be an option for this in a very obvious place, like user account
> settings or the bitch list installed programs!Any application that is properly designed to work on Windows 7
either would give the person making the installation option to
make the application available to all users, or do it automatically.
by default. It is entirely the responsibility of an application
programmers and out of Microsoft's control. Thus, the easiest way, of
of course, is to use an application that is designed for a multi-user operating system.
But, unfortunately, this is not always an option, where companies must rely on
existing proprietary applications.If you install the legacy application places its shortcuts
only in the start of the person performing the installation, all the
You may need to do is to move these Start Menu entries to the same
location in the C:\ProgramData\Microsoft\Windows\Start start\program
folder and/or the C:\Users\Public\Public Desktop folder.In addition, such an incompatible application can offer additional
"challenges:You may experience problems if the software has been designed to
Win9x / Me, or if it was intended for Windows NT / 2 K/XP, Vista/Win7, but was
poorly designed. Quite simply, the application 'knows' how
manage individual user with different security permissions profiles
e going to
'banned' sections of the Windows registry or Windows protected
system folders.For example, the saved data is often stored in a subfolder under the
folder of the application in C:\Program Files - a place where it doesn't
the inexperienced user or limited should never have write permissions.It may even be that the software requires 'write' access to the parties
the registry or the files/folders to systems protected are not normally
accessible to regular users. (He * didn't * happen if the application is)
correctly written.) If this does not prove that that is the case, however, you
often left with three options: either grant the required users
privileges of senior access (either as users with power or local
Administrators), explicitly grant privileges for normal users
the relevant records and/or parts or the registry or replace the
request by another who has been properly designed especially for
WinNT / 2 K/XP/Vista/Win7.Some programs do not work if you connect limited account
http://support.Microsoft.com/default.aspx?scid=KB; EN-US; q307091In addition, here are some tips suggested, in response to a
another post, MS - MVP Kent W. England:"If your game or your application works with administrator accounts, but not with."
limited accounts, you can set it to allow limited users to access to the
folder Program files with 'change' ability rather than 'read' that
is the default value.C:\>Cacls "Program Files\appfolder" /e /t /p user: c
where "appfolder" is the folder where the application is installed.
If you want to undo these changes, then run
C:\>Cacls "Program Files\appfolder" /e /t /p user: r
NOTE: On Win7 Icacls.exe gives more control.
If you still have a problem with the delivery of the program or save the settings
on limited accounts, you may need to change the permissions in the registry
keys. Run regedit.exe and go to HKLM\Software\vendor\app, where
the key of the Publisher of the software used to your own
program. Change the permissions on this key to allow users full control. »--
Bruce Chambers
Help us help you:
http://www.CatB.org/~ESR/FAQs/smart-questions.htmlhttp://support.Microsoft.com/default.aspx/KB/555375
They who can give up liberty for a little temporary
safety deserve neither liberty nor safety. ~ Benjamin FranklinA lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell
The philosopher never killed the priests, while the priest was
has killed a large number of philosophers.
~ Denis Diderot -
I just bought a Dell computer with a 27-inch screen. I can increase the size of the print in windows, but that seems to have no effect in Firefox.
All I can find in the pages of your 'how to' is the use of programs, etc. Nothing on the SCREEN.
How can I make the TEXT bigger so that I could see it on the big screen?
Thank you very much
Old lady
Thank you, crazy
It turns out that the toolbar in windows 8 is down at the bottom of the screen and hidden. He ended up with alt (not 10, however).
I don't know how I did it, but I finally found a few addon option that would download and managed to enlarge the font. For Mozilla base pages, at least. Not yet for enamel. However, since internet explore makes any big, I'll just use it for email.
I do not give up, but I guess that the e-mail program has a clean mind.
You have been helpful, although I am also not a geek, I don't know what you're talking most of the time.
Thanks anyway for me to get through this.
oldlady
-
How to make an app available by HTTP?
A beginner question: I finished my MIDlet to Blackberry le Portage, everything works fine in the emulator. I don't have the equipment to do the final testing, a friend. I would like to make the app available through the net (HTTP maybe?) so that it can download and test.
With J2ME, I just put my JAD and JAR file in the same directory in my HTTP server and give him a link to the JAD, but I don't know how to do with the Blackberry MIDlets.
I would give a link to the COD file? Or is it like J2ME, JAD & JAR? A Blackberry instala stuff in this way? Please enlighten me here
Place the jad file and all the files of the cod in the same directory on the server web and it give a link to the jad file. Cod files are referenced in the jad file.
You must also add a mimetype for the extension of the Cod.
-
How to make typekit fonts appear in temp site BC
I'm working on a site and added one of the fonts of a kit that I created in Typekit using Dreamweaver. The local site is linked to a temporary site in Business Catalyst. I applied the new font to a part of the text, and I can see it in the local. But when I preview, either directly in British Colombia or Safari and Chrome (I understand DW overview use webkit now anyway) or Firefox / Opera, the new police force makes any. I made sure that I added the JavaScript from the Embed Code as suggested by the Typekit and ensured that my kit in Typekit has localhost and the temporary BC site set up. I also clicked on publish after updating my kit and waited a while before trying the preview. I still can't get it to work. Any suggestions?
Thanks for the screenshots, Alonso. Typekit fonts load into the page correctly; You can see that the events of fonts are defined "active" in your third screenshot.
The CSS is currently using the font family name "Grafolita Script support", for example
section. Hero h1 {}
font-size: 325%;
margin-bottom:-10px;
make-weight: normal;
line-height: 1em;
do-family: 'Grafolita Script support;
}
There are two updates that you need to make to the police is displayed correctly:
(1) adds the average weight of the Grafolita Script to your kit. Now you have the regular weight & "BOLD" included, but no way.
(2) the family name provided by Typekit is "grafolita-script", with a hyphen. For later use, you can check the last name of Typekit in the Editor Kit by clicking on the link "Fonts in CSS using" selectors. TYPEKIT | Working with CSS selectors
The font weight is defined in a rule separate police-weight; the average weight of the Grafolita Script is 600:
TYPEKIT | With the help of several weights and styles
If you add 'grafolita-script' to the pile of police everywhere you use the 'Grafolita' Script, the police will load correctly:
section. Hero h1 {}
font-size: 325%;
margin-bottom:-10px;
make-weight: normal;
line-height: 1em;
Police-family: grafolita script, 'Grafolita Script support;
Police-weight: 600;
}
I made the change to the font family name using the tools of web development in Chrome, so you can see that the Grafolita Script is applied to the text. If please give that a try and let me know if you have any other questions! Best,
-liz
-
How to make a CD available USB drive VMS as a USB under ESXi 5.5
Hi people:
I discovered a possible problem with ESXi 5.5 which I hope someone knows a way to get around. I plugged a USB CD/DVD drive in an ESXi host 5.5 current enforcement in the expectation that I would be able to assign to a virtual machine as a USB device. However, it has not shown as a USB device is available. Also, it did not show as a host device that I could assign to a virtual CD/DVD device. I rebooted the host and then the CD/DVD USB drive present themselves as a host device that I could assign to a virtual CD/DVD device. Of course, the problem is that I don't want to have to restart the host whenever I want to connect a physical to a virtual machine CD/DVD player, and I don't want to let the reader of CD/DVD USB connected to the host all the time I use it for other things as well (the host has not its own CD/DVD drive).
So I guess my question is:
(1) is there a way to say ESXi a newly connected CD/DVD USB drive is intended to be a USB device that can be connected to the virtual machines, or
(2) is there a way to force rescan USB devices for USB CD/DVD players to demand and available as a host device to be assigned to a virtual CD/DVD device without a restart ESXi?
I hope that there is some configuration settings, I do not know on which control this behavior.
Suggestions welcome.
Ok. I found the answer. Guess I didn't have a good enough search until I posted.
Basically, you need to restart the daemon spend after you have added the device USB CD/DVD:
restart the /etc/init.d/hostd
from the console service. Which causes ESXi to rescan USB devices and CD/DVD USB drive is available to be mapped as a host device on a virtual CD drive of the virtual machine. It is not as good as to be able to use it immediately, but at least it does not require the host be restarted each time.
-
VISION and research - how to make the font darker and easier to read "Help".
Recently had a good success to make the police clearer and darker in the Finder through this article
http://www.macworld.com/article/2026699/stop-squinting-make-text-bigger-in-os-x. HTML with result
as a result of these directions for Finder also increases the clarity of printing at the Mall and elsewhere.
BUT what of the online manual that appears when using the search for "Help"?
IS it there A WAY OF MAKING THIS DARKER/more CLAIR rather that the shades of gray that I am experiencing.
Using a MacBook Air (mid-2013) Yosemite 10.10.5 - who says that my reading is not as good
resolution than the models that followed.
Reading others also eager to make the darker lighter text also, the eyes are bad after
to see the lighter police force and it makes it less interesting to learn what this online
Manual has to offer. Please help if you can give me any advice on improving this situation.
Try to open help and then use the command - + to enlarge the page.
-
How to make a class available to one of my projects?
I wrote a simple zeros of the function to suppress the leak when the display of percentages. The class extends the class trainer number.
How or where, and in what package can I place this class, if I want to be able to use it anywhere in one of my projects?
DougYou must create a Flex library project. This type of outcome of the project is SWC file, while the result is a Flex SWF application project.
So let's say your trainer is in the my.library.formatter package and is called ZeroFormatter. So, it will be in the folder my/library/trainer. With this folder in your Flex project, you will find a CFC in the bin of your project directory.
Now you can use it in any other project. In another Flex application project, change the project properties and select the Build path and select the libraries tab select Add SWC and navigate to CFC you just made and choose the Add button.
Now you use import my.library.formatter.ZeroFormatter and the class ZeroFormatter.
-
How to make the font bigger on the items on the web?
I think it is quite specific. I can't read a lot of articles on the web, because the font is too small. How can I make it bigger?
Have you tried the Firefox zoom feature? How to use Zoom? How | Firefox help
If you find that you have to "zoom in" most of the sites, you can set a new standard zoom (default) level for all sites using this add-on: NoSquint. After setting your overall zoom level, you can still adjust the zoom on different sites.
After the installation of NoSquint, click on the % in the bar of the add-on call site preferences, then click the global settings button, then the zoom tab.
If you do not have the bar the module displayed, you can click the new tab button ("+") or a box empty bar tab to the right of the item and choose the module bar on the shortcut menu.
You can experiment with sizes greater than 125%, but I wouldn't not much higher than 150% unless you have a large screen high resolution.
If there are sites that are still a concern, feel free to post their URLs.
-
How to make disk space available
I have 1 GB of space in my drive c. I need 2 GB of space to update windows service pack 1 for windows vista 1525. How can I solve this problem.
Run the Disk Cleanup program. Boulder computer Maven
Most Microsoft Valuable Professional
Maybe you are looking for
-
Skype logo at the bottom of the computer has a black square logo on top and does not open when I cli
Skype logo has a black square on the top to the bottom of my laptop and when I click on it it won't do anything, I can't acess it.
-
Musictitle no longer appears on watch
Hello I've recently updated watch OS 2.1. (with an iPhone6 (9.2)) Now it seems that I do not see the musictile of the song that I hear more. Also the control with play/pause/next/unfounded will not work. What I can do in the audit of STIs for the vol
-
I am new to labview and need help with a basic circuit. I would create a vi that allows the user to enter a list of start/stop times from the Panel to activate a single output power sequentially at 10 different time intervals on and off. I tried to u
-
BLUE SCREEN: UNABLE TO START EVEN IN SAFE MODE
Hi, I have Windows XP Home Edition. My PC was working fine last night that running slow exemely. Tried to launch today, but he gave me the following message is displayed: "A problem has been detected and window has been closed to prevent damage to y
-
was going to download the music that is on my computer for an apple ipad. is this possible?