How to create a printable page in the OPS using Jdev10g
HelloI tried to create a printable page in OAF by following the steps in the OFA Devguide
Step 1: Add a button to the page level, as described in the document of buttons (Action/Navigation).
Step 2: Assuming that your button label is the 'Printable Page' standard, apply the frame OA attribute set/oracle/apps/fnd/attributesets/Buttons/PrintablePage.
Step 3: Define the button's Destination URI property to point to the current page and set the setting facet UIX (TAO) to print as shown in the following example (see control output rendered UIX for more information on the facets). Don't forget to keep your application module.
OA.jsp_? page = < CURRENT_PAGE > & retainAM = Y & TAO = printable_
* my path of the current page is * _
OA.jsp? page = abhi.oracle.apps.ak.employee.webui.AdbPG & retainAM = Y & TAO printable =_
Note: Earlier versions of the OA Framework recommended giving the print page button send the ID IcxPrintablePageButton. OA Framework detects this ID and behaves correctly when the user presses the button. Although it works again, new code is based on the approach of facets instead.
Step 4: Set the property of the _blank target frame button to make sure that the printable page opens in a new window.
but after doing that, I'm getting below the exception.
Exception details. _
oracle.apps.fnd.framework.OAException: the application id, or short name you entered does not exist. _
I'm new to OFA...
can someone guide me how this exception can be corrected?
Hello
Sorry, wrong forum. It comes to Oracle JDeveloper. OFA related issues are dealt with on the forum of the OFA
Frank
Tags: Java
Similar Questions
-
How to create a new page when the user activates a box?
I guess this would be a checkbox. I am looking for a way to create a user, select Create a new page when the user runs out of space in the text box that is given. So if possible is a way to create a new page with a text box continuous when the user selects create it a new page check box. Thank you.
Yes, if you create a new page in the designer of the LC (page 2) and deselect the number of minutes, so that when the form is displayed at the start, it is not an instance of the page. While the click event of the button would be:
_page2.addInstance(true);
You can design page 2 with which opposes always desired.
Hope that helps,
Niall
-
How to create a new page with the existing provision of the one that I already created?
Well, I'm very new to DreamWeaver, just an info. I was ordered to develop a site for a company. There will be as a total of 10 pages on the site. I created the home page, and I'm now trying to make the other. But I don't know how I can take the basic layout, I created in the homepage so I can add information for other pages later. I tried to save as a template, but I had to create editable regions and those got in the way. I even tried to copy the code from the original, but then the Spry menus will not work correctly. I hope I passed my problem properly. Any help will be more useful.
Thank you.
- Open index.html
- File > save as > page2.html
- Repeat for other pages of the site...
- Change content as needed.
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
-
How to create a CS5 ZXP throughout the CC2014 using ucf.jar
Hello world
I use a version of maven to generate a CS5 ZXP throughout the CS6 for InDesign. Now, I would like to add CC and CC this ZXP 2014, while I have a universal ZXP for all my versions supported.
I use the ucf.jar to generate my current ZXP. I tried to add my mxi CC and CC2014 to install on these versions.
The ZXP generate well and can be installed without any error in the installation of signage. But when I run the application InDesign CC 2014 for example, my native plugins behaving oddly.
I noticed in the technical notes on the FCU, which mentioned versions are until CS6:
I've seen other technical notes speak ZXPSignCmd to package a ZXP, but with do not mention anything on a supported version:
http://wwwimages.Adobe.com/content/dam/Adobe/en/DevNet/creativesuite/PDFs/SigningTechNote _ CC.pdf
I tried my extension with the UCF package, but InDesign CC 2014 seems to not work properly with installed extension once installed. I noticed the symbolic links in plugins installed here where it is replaced by the sharp the link file.
I tried my extension with ZXPSignCmd of packaging, but Extension Manager CS6 tells me that the ZXP does not contain a valid signature.
Not there at - it no way to create a universal ZXP works on all these versions?
Hello world
I had the chance to talk to Fraser Gregor, developer at Adobe involved in the development of tools of ZXPSignCmd. He told me that it was impossible to generate such ZXP this way.
UCF.jar is a tool for InDesign CS6 and earlier versions. ZXPSignCmd was designed for the CC and latter versions. The solution, he offered me was to have a ZXP for any version under CS6 and a ZXP for any version of the latter as CC. Then he told me to have a ZXP wrapper to hold both of them. As a result of this way, I can have a universal ZXP.
It's a little more work, but it should work. To create the universal ZXP, we can use ZXPSignCmd.
-
How to create a new EO in the OPS?
Hi all
Please tell me the steps to create a new EO on custom table.
Help, please.Hello
FSL wrote:
Please tell me the steps to create a new EO on custom table.Follow steos:
-In the project to create a bc4j bussinescomponent
xxx. Oracle.apps.po.msg.Schema.Server-Right-click to creae new eo... Next
Name: customEO
Package:xxx. Oracle.apps.po.msg.Schema.Server
object: tablename of schemanext > select primary key
check methods
-createMethod
-dataManipulation
-VAllidation
-Remove-check generate default viewobject
-ApplyConcerning
Meher IrkPublished by: Meher Irk November 30, 2010 15:57
-
How to create a document and insert the words and/or art on both sides of the page
How to create a document and insert the words and/or art on both sides of the page
How to create a document and insert the words and/or art on both sides of the page
You create a document by using an application of word processor like Microsoft Word or Corel WordPerfect or OpenOffice Writer. Think of it as a broad a page roll.
When you print the document, you can print all pages of the document on one sheet of paper (the normal default value), or you can print on both sides of a sheet of paper.
Some printers are capable of automatic double-sided printing. With others, you print all the odd pages and then take the stack of paper, turn upside down and put it back into the printer to print all pages. You need either to read your printer manual, or experiment a bit to determine if you need to re - organize the first last pages before printing the second side.
-
How can I create a separate page in the menu bar?
How can I create a separate page in the menu bar?
I want to create a page that does not contain the bar, other pages, and I don't want other pages to include this new page in their menu bars.
I want to create a different page (s) completely independent in an existing menu bar and maybe add it's own menu bar...
Is there a way to do it?
Yes, you can right click the page you want to have separate and select "exclude of the Menu.
-
How to create a unique page on one side of the other view?
I have a document that considers the side-by-side, except the first page. I would like to see unique page and the ability to print a page by page!
Any help?
Thank you
Blue
Looks like you don't have a side-by-side, as it is normally referred to in Acrobat, but that the PDF file is actually a set of pages that are 2 pages per sheet. To be able to print a page of the worksheet, use the crop tool to select one side (and the same on all the leaves if you select everything). Then print this set. For other pages, simply move the culture across the sheet and repeat. Looks like it's what you're trying to do. If you want a single PDF file with 1 page per sheet, a crude to do this is to print each cropped to new PDF series. Then merge the two sets of printing and then rearrange the pages.
-
How to create a new folder in the voice tab 7 hp slate
How to create a new folder in the voice tab 7 hp slate?
I wish to cretae a folder in my home page.
Please help me...
Hello and welcome to the HP support community!
You want to organize your icons in folders, or put a shortcut of data on your home page folder?
The first is easy, this last not so much.
Just hold your finger on an icon, and then drag it on another similar icon. A "folder" will be done with the name "unnamed file". Press and hold the words to change the name of the folder.
I'm not aware of a way to file a record of data on the homepage...
WyreNut
-
How to create a secure page. Not a secure area, just a https page to a form?
How to create a secure page. Not a secure area, just a https page to a form? I can't find a way let me by creating or copying a page in dreamweaver and admin console is only showing the current http pages. I created before secure areas and included secure on my address worldsecure applications, but I just want to have pages on https.
Make your page then it just a link to your domain secure (found under settings-> fields within the admin site)
-
I need to update the screenshots for a new version of an existing iTunes Connect App asks me to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?
You must call the assistance of the company and ask them to help you with this. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.
Neil
-
How to create a report based on the item selected from the list of selection?
Hello
I created a tables_LOV based on:
Select table_name table_name user_tab_cols r, d
where column_name like '% _type % '.
Then I created a ListOfTables page element, display in a selection list and pointing to tables_LOV.
I run the page, and I can choose the table I want in the drop-down list.
How to create a report based on the selected element? (ex: select * from selected_table)
Thanks in advance
Salah
Hi Salah,
Allright, take a look at this page: http://apex.oracle.com/pls/apex/f?p=vincentdeelen:collection_report
I think that simulates what you are trying to accomplish. I've implemented the simplest method I could think of.
The report is based on a collection of apex. If you are not familiar with this, you should study the documentation: APEX_COLLECTION
To recreate my example, you should:
(1) create a report (interactive) on your collection
SELECT * FROM APEX_collections WHERE collection_name = 'MY_COLLECTION'
(2) create a selection list page_item for the tables that you want to display (in my case, this is called "P38_TABLES")
(3) create a dynamic action that triggers on the evolution of your selection list page_item. Dynamic action must be a parade of PL/SQL procedure the following code:
declare l_query varchar2(4000); begin l_query := 'select * from '||:P38_TABLES; if apex_collection.collection_exists ( p_collection_name => 'MY_COLLECTION' ) then apex_collection.delete_collection ( p_collection_name => 'MY_COLLECTION' ); end if; apex_collection.create_collection_from_query ( p_collection_name => 'MY_COLLECTION' , p_query => l_query ); end;
Make sure that you add your page_item 'Page to send items' section.
(4) add a real extra action that makes an update of the report area.
Here are two photos describing the da:
http://www.vincentdeelen.com/images/OTN/OTN_COLLECTION_REPORT_DA1.PNG
http://www.vincentdeelen.com/images/OTN/OTN_COLLECTION_REPORT_DA2.PNG
Good luck and greetings,
Vincent
-
How to create a gallery page that you can click on an image, expand it and move left or right to see more images?
@
You can use the slideshow widget to do this. For more details: Adobe Muse Help | Working with slide show widgets
-
How to create drop down menus in the main menu?
How to create drop down menus in the main menu?
such as:
1 menu 2 menu 3 menu 4
menu one
menu b
menu menu menu x c y menuz
menu d
I have the top menu, but don't know how to get the submenus
Help you to appreciate in advance
You must set the 'Pages' menu preferences:
-
How to create checkbox with HTML in the labels?
How to create checkbox with HTML in the labels?
If it is possible without the help of APEX_ITEM. BOX?Hello
Yes you can do it. You just need to set * "Escape special characters" = No * in the area of 'Security' of the page box point you. But please be aware that this change could make your application vulnerable to XSS attacks in the case if users are allowed to enter data into the table that is used to fill the entries in the box.
Concerning
Patrick
-----------
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf
Maybe you are looking for
-
See info above. I re - run the update process at least 10 times on the two machines running Windows 7 Pro (most recently this morning), and whenever the two machines running Windows 7 Pro (one is 64-bit, one is 32-bit) say that Firefox v34.0 is "up-t
-
Satellite A30: Software Modem - no dial tone
I reinstalled XP English on a machine bought in Spain.The modem has no link as all - no dial tone can be heard.I have installed the latest drivers, cables everything is OK. Phone line œuvresThe modem seeks COM3 but there is no COM port in Device Mana
-
Home PC, computer laptop, Windows XP. All of a sudden, I start my machine, and I don't see my files or programs. The administrator is denying me access to the Task Manager and the registry. It is the same in Safe Mode. System Restore is also denyed b
-
Hi, I am a new developer and try to learn the native sdk. I tried several times, but don't know how I can add 2 numbers and display, don't have an option convert or number type just the text. I want to receive 2 issues (in diferent textfield) and dis
-
BOSD occurs frequently - attached DMP
Hi Please help me with this one because I am at a loss When I plug my LaCie SSD hard drive, all is well for a period of time, and then I get a Disconnections. It is plugged into a USB 2.0 port. If I use the same hard drive on my laptop, all right