How to create a validation script that sets my value to a minimum of 1 (even if the calculation of the value is less than 1)?

Similar Questions

• How to create an effective script that mass deletes snapshots

  our company is currently using a product that drives the operating system and software updates for our virtual machines and takes a snapshot before pushing updates in case something breaks. the problem is that the same software does not remove the pictures until next update button and you're just too long we wait with snapshots lying around. what I did to remedy this situation is I built the below script and configured it as a task.

  # Add the snap-snap powercli in
  Add-PSSnapin VMware.VimAutomation.Core

  # Connect to an instance of vCenter
  $strviserver = "vCenterServer".
  SE connect-VIServer $strviserver

  # Get all of the snapshots for each virtual machine in the vcenter, then delete them
  Get - VM | Get-Snapshot - name "updates" | Remove-Snapshot - confirm: $false

  # Remove the snap-snap powercli in
  Remove-PSSnapin VMware.VimAutomation.Core

  It works, but it is not nearly as effective as I wish it were. Essentially, the script currently removes a snapshot at a time right now. I want so he can find any snapshot on this server vcenter by the same specified name and submit the task deletion-Snapshot for each snapshot at the same time. This should cause a lot of tasks to try and tail. The effective result would be that vCenter will treat all instant destruction because it has resources to do in a given time and will address the queue there resources.  If someone can tell me how to do this or something better, I would really appreciate it! Thanks in advance!

  You can consider using the RunAsync switch on the cmdlet Remove-Snapshot .

  In this way, that the script will continue while delete the snapshot is still running.

  Note that there is obviously that a limit on how many parallel snapshot removes that may occur due to the resources available.

• How to create a PDF page that displays in Email and contains links to a page in the full PDF.

  Mac CS 5
  I was able to create the PDF page and activate links to pages in the PDF document. But when I test - send two files to myself, the links do not work.

  You cannot control how, or if, the PDF files are presented in an e-mail. They are just incidental. SOME mail readers will find a PDF attachment and view automatically, in a way or another, perhaps as an image of dead rather than a direct PDF. Some will do it only for the single page PDF. Most don't do at all.

  If you want an interactive email with design and links, you can work with HTML.

• How to create a validation "not null" unique for all elements in a page?

  Hello world
  
  How to create a validation "not null" unique for all elements in a page? I love textfields. Rather than create "not null" validation for each article, I would like to create a single validation control that will be used
  
  Thanks and greetings
  Umer

  Nice1 wrote:
  Bob, like u said I did the following:

  (1) less to create a button, there are 9 elements, and for each item, I put in the light of 'yes '.
  (2) under the button Delete, there is 1 point and have in light of the 'Yes' for the item
  (3) validation of the page defined for the 9 items under 'create a button' and put it to fire when 'create' button clicked
  (4) the page validation set for 1 number under 'remove' button and put it on fire when "delete" button clicked

  now, when I click on the 'create' button it shows same for the item under the "Delete" button that's a required element

  Sorry, I do not see this note. The required model will not work, there is no way to attach it to the button.

  The best solution is that the answer only a few answers to the top

  Create 2 validations page type as a PL/SQL with code

  1st validation
  
  :P1_ITEM1 IS NOT NULL and :P1_ITEM2 IS NOT NULL ...... and :P1_ITEM9 IS NOT NULL  include all 9 items
  
  Set the When Button Pressed to the CREATE button
  
  2nd validation
  
  :P1_ITEM10 IS NOT NULL
  
  Set the When Button Pressed to the DELETE button
  

  I think that this will be the best way to do it.

  Published by: Bob37 on April 27, 2012 12:02

• How to create an action link that goes to a section that is 'hidden' in the same page

  Hello

  OBIEE 11, I have a dashboard page that has section 1 as a guest, 2 which shows an analysis that contains a chart and article 3 that shows the details of the graph. I have an action to link this graphic article 2 connection to the details in section 3. However, I would like my report to the do not appear in article 3 as long as you press the link of action. Is there a way to 'Hide section 3 until you press the link action?' Thank you!

  Hello

  Try to avoid the double-display: How to create an action link that goes to a section that is 'hidden' in the same page

  Felipe_Idalgo meets the other post (and he posted the best answer to your needs), in order to continue the other thread instead of opening another.

• I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.

  I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.  I am a novice using Javascript, so what am I doing wrong?

  Cannot use either addWatermarkFromFile or addWatermarkFromText methods of document with player as shown in the documentation. You can hide/display the form fields and the existing layers, so consider this approach.

• How to create a Web site that users can connect to?

  Hey guys

  How to create a Web site that users can connect to?

  How to create a site that users can connect to with steam, facebook, twitter, etc...

  See this discussion where a similar topic was discussed.

  Login using Muse and British Colombia page

  Thank you

  Preran

• How to create a gallery page that you can click on an image, expand it and move left or right to see more images?

  How to create a gallery page that you can click on an image, expand it and move left or right to see more images?

  @

  You can use the slideshow widget to do this. For more details: Adobe Muse Help | Working with slide show widgets

• How to create crystallize effect like that?

  How to create crystallize effect like that?

  

  I know that this can be done with the "3D postcard" and make the settings (vertices, edges, lights).
  But how can I create crystallized texture even like that? Then, which would create "postal 3D map.

  But how can I create crystallized texture even like that?

  You can not. Not in PS. It is a Voronoi tesselation motif created by dividing a contour of mesh 3D accordingly. Of course the filter Crystalize product model, but like cards post 3d are based on uniform grid subdivision, you do not get the vertices and edges. There you go...

  Mylenium

• How to generate a sql script that is based on the structure of the table

  I want to generate a sql script that is based on a table structure.
  
  For example:
  
  If the table is:
  
  CID id c_value
  -----------------------------
  1 1 zz
  2 1 yy
  3 2 zz
  4 2 xx
  5 3 ss
  6 tt 3
  
  
  The expected output is:
  
  WITH
  CHILD_tab like)
  SELECT 1 cid, 1 id, 'zz' c_value of all the double union
  SELECT 2 cid, 1 id, 'yy' c_value of all the double union
  SELECT 3 cid, 2 id, 'zz' c_value of all the double union
  SELECT 4 cid, 2 id, 'xx' c_value of all the double union
  SELECT 5 cid, 3 id, 'ss' c_value of all the double union
  SELECT 6 cid, 3 id, 'tt' double c_value)
  
  
  11.1.0.7.0 release

  I do a lot of XML these days (maybe too well) so here is a solution involving XQuery.
  We pass a query string and it generates a CLOB containing the WITH clause:

  SELECT DBMS_XMLGEN.Convert(
  XMLQuery(
  q'[concat(
  "WITH t AS (
  ",
  string-join(
   for $i in /ROWSET/ROW
   return concat( " SELECT ",
                  string-join($i/*/concat("'",ora:replace(text(),"'","''"),"' ",local-name()),", "),
                  " FROM dual" ),
  " UNION ALL
  "
  ),
  "
  )")]'
  passing dbms_xmlgen.getXMLType('SELECT * FROM scott.emp')
  returning content
  ).getClobVal(), 1) AS WITH_CLAUSE
  FROM dual;
  

  WITH_CLAUSE
  --------------------------------------------------------------------------------
  WITH t AS (
   SELECT '7369' EMPNO, 'SMITH' ENAME, 'CLERK' JOB, '7902' MGR, '17/12/80' HIREDATE, '800' SAL, '20' DEPTNO FROM dual UNION ALL
   SELECT '7499' EMPNO, 'ALLEN' ENAME, 'SALESMAN' JOB, '7698' MGR, '20/02/81' HIREDATE, '1600' SAL, '300' COMM, '30' DEPTNO FROM dual UNION ALL
   SELECT '7521' EMPNO, 'WARD' ENAME, 'SALESMAN' JOB, '7698' MGR, '22/02/81' HIREDATE, '1250' SAL, '500' COMM, '30' DEPTNO FROM dual UNION ALL
   SELECT '7566' EMPNO, 'JONES' ENAME, 'MANAGER' JOB, '7839' MGR, '02/04/81' HIREDATE, '2975' SAL, '20' DEPTNO FROM dual UNION ALL
   SELECT '7654' EMPNO, 'MARTIN' ENAME, 'SALESMAN' JOB, '7698' MGR, '28/09/81' HIREDATE, '1250' SAL, '1400' COMM, '30' DEPTNO FROM dual UNION ALL
   SELECT '7698' EMPNO, 'BLAKE' ENAME, 'MANAGER' JOB, '7839' MGR, '01/05/81' HIREDATE, '2850' SAL, '30' DEPTNO FROM dual UNION ALL
   SELECT '7782' EMPNO, 'CLARK' ENAME, 'MANAGER' JOB, '7839' MGR, '09/06/81' HIREDATE, '2450' SAL, '10' DEPTNO FROM dual UNION ALL
   SELECT '7788' EMPNO, 'SCOTT' ENAME, 'ANALYST' JOB, '7566' MGR, '19/04/87' HIREDATE, '3000' SAL, '20' DEPTNO FROM dual UNION ALL
   SELECT '7839' EMPNO, 'KING' ENAME, 'PRESIDENT' JOB, '17/11/81' HIREDATE, '5000' SAL, '10' DEPTNO FROM dual UNION ALL
   SELECT '7844' EMPNO, 'TURNER' ENAME, 'SALESMAN' JOB, '7698' MGR, '08/09/81' HIREDATE, '1500' SAL, '0' COMM, '30' DEPTNO FROM dual UNION ALL
   SELECT '7876' EMPNO, 'ADAMS' ENAME, 'CLERK' JOB, '7788' MGR, '23/05/87' HIREDATE, '1100' SAL, '20' DEPTNO FROM dual UNION ALL
   SELECT '7900' EMPNO, 'JAMES' ENAME, 'CLERK' JOB, '7698' MGR, '03/12/81' HIREDATE, '950' SAL, '30' DEPTNO FROM dual UNION ALL
   SELECT '7902' EMPNO, 'FORD' ENAME, 'ANALYST' JOB, '7566' MGR, '03/12/81' HIREDATE, '3000' SAL, '20' DEPTNO FROM dual UNION ALL
   SELECT '7934' EMPNO, 'MILLER' ENAME, 'CLERK' JOB, '7782' MGR, '23/01/82' HIREDATE, '1300' SAL, '10' DEPTNO FROM dual
  )
  

  It may be useful for small datasets only because we reached quickly ORA-01706.

• How to create a validation only for the lines that are created in a table

  Hi all
  
  I have a simple question. Is it possible to create a validation in a table that fires only for created?
  
  There is a possibility at the APEX 4.1 choose two types of "* execution scope *" is first of all ' * created and updated lines * "and the second is" * all subject lines. "
  
  Thanks in advance!
  
  Kind regards
  
  Jiri

  Hello Jiri,

  > Is it possible to create a validation in a table that fires only for created?

  You can still use the field lines created and updated the and use a PL/SQL Expression condition of:

  :APEX$ROW_STATUS = 'C'
  

  You will also need to change the Condition run for each line.

  It will be useful,
  Arie.

  -------------------------------------------------------
  Be sure to mark the appropriate fix/useful messages. For the long term, it will benefit us all.

• How can I use a script to set the variables?

  I have a script to set a few variables and I need to run the script multiple times throughout the form, for different users at different times.  How can I configure the script as an object in the Variables and call it when I need to run it?  Appreciate all help.  I use SS3.

  var emailSubject = "";
  var cleanDate = Page1.EventDetails.Block2.SpeakingDate.rawValue.replace(/[\/]/g, "-");
  var eventName = Page1.EventDetails.Block1.EventName.rawValue;
  var eventCity = Page1.EventDetails.USaddress.CityEvent.rawValue;
  var eventState = Page1.EventDetails.USaddress.StateEvent.rawValue;
  emailSubject = cleanDate + " - " + eventName + " - " + eventCity + " - " + eventState;
  

  To create a function to be able to reuse the code easily right click in your hierarchy (for example, on your "form1"), click "insert a Script object.

  A new script object will be created, just rename it to something appropriate and then create a function both inside and

  function myFunction(var1,var2,var3){
  ' just an example '
  page1.textfield1.rawValue = var1 + var2 + var3
  }
  

  (I didn't fully understand the significance of the date and the event and the city, and exactly what your function is supposed to do, but it's how you declare a function).

  To call this function you simply reference as form1.scriptobjectname.myFunction(123,"asdf",variablename)

  (just one example of the possible arguments).

  I hope that's not too hard to follow,

  Best regards, Mattias

• How to create a date field that is fixed at the signing?

  Hello

  I created a series of PDF forms on Adobe Pro XI which are designed to be filled out using Adobe Reader (where are saved as Adobe Reader Extended). Once the form is complete there are fields of signature that the user who digitally sign then it disables the specific form fields of editing more far. Next to the signature field, I have a date field that, at present, is using JavaScript to automatically generate the date of business at the opening. However, the question that I have is that I want this field date which will be fixed when the form is signed, rather than update again when the form is opened. Is this possible?

  The document JavaScript that I use to generate the date currently is:

  this.getField("Date1").value = util.printd ("dd/mmm/yyyy", new Date());

  But obviously, this is independent of the signature field.

  How can I create a date field which is set by the current date at the signing?

  I am very new to Adobe in general so I don't have much of an idea about how to go about doing this. Could someone please help me to do it if possible?

  Thank you

  KC

  Go to the properties of the field of Signature and on the signing tab, add

  Copy the following code in the section previous "this script is run when the field is signed.

• How to create an interactive cursor that returns a numeric value.

  Hello world

  I am trying to create an interactive slider that the user can drag an icon from left to right, in order to select a numerical value. This numeric value will be output to a dynamic text box to capture the data. Please see the example at the link below...

  http://www.carbontrust.co.UK/solutions/CarbonFootprinting/carbonfootprintindicator.htm

  I welcome suggestions of action script to create a slider like that.

  Thanks for your help

  Just as an example, open a new file and add a movieclip on the stage... give it an instance name of "handle" and place it at x = 0, y = 100.  Then place this code in a layer of actons (code red, it's how the drag limits are set)

  handle.addEventListener (MouseEvent.MOUSE_DOWN, mouseDown)

  function mouseDown(event:MouseEvent):void {}
  handle.startDrag (false, new Rectangle (0, handle.y, 200, 0));
  }
  handle.addEventListener (MouseEvent.MOUSE_UP, mouseReleased);

  function mouseReleased(event:MouseEvent):void {}
  handle.stopDrag ();
  }

• How to create an installation script to support objects

  Guys please help with this I have been through Google all day but with no luck, I moved that the workspace to the production environment and application as well, but the thing is the tables using the app has not been moved with the application. On the assumption of the objects in the application page, I selected Yes in the include supporting objects option. Does anyone know how I could create an installation script to create the tables as well. ?

  rhisingh,

  Read documentation Application Deployment

  See also related book ORACLE APPLICATION EXPRESS SUPPORTING OBJECTS