How to create momentum for an emitter follower circuit that will lead to a motor continuous

Similar Questions

• How to create custom underscore and make a style that will not change the style of text when it is applied?

  Hi, I just want to know how can I create custom underscore and make a style, so that when I apply it to the text it right to point out that the article selected

  As long as no other character style is applied, you can create and apply a character style that is completely empty except for underscores. That will add an underline without affecting the text in any other way. If a different character style is already you must either add an underscore to this style definition (which will add an underline to all text formatted with this style) or make a copy of the style and add the underline, and then apply the new style.

• How to create folders for my received emails iCloud on an iPad?

  How to create folders for received emails on an iPad Air iCloud?

  In the mailbox display, press the "Edit" button, then "New mailbox", type a name, choose a location and then "Save".

• How to create conn for bridge JDBC-ODBC for MS Access db in ADF APP?

  Mr President.

  How to create conn for bridge JDBC-ODBC for MS Access db in ADF APP?

  Concerning

  Hello everyone!

  I managed to get connect to access ms in adf application based in jdeveloper as below:

  First Control Panel tools admin and go to the data source (odbc) and create the dsn system as below picture

  

  Then, go to jdeveloper ide conn resources and then basic data and news database conn and then select jdbc-odbc briddge and then custom jdbc url gives as bellow pic

  

  See you soon

  Tanvir

• How to create a Unique constraint on a column that already has duplicates. Only future duplicates should be avoided

  Hi all

  Can someone let me know how to create a Unique constraint on a column that already has duplicates. Only future duplicates must be avoided.

  Any help will be greatly appreciated.

  Best regards

  gt1942

  ALTER table Add constraint unique (column_name) may be deferred novalidate;

• IOM: How to create workflows for demand

  11 GR 2 IOM 11.1.2.2

  How to create a workflow to IOM, where an administrator (except xelsysadm) in IOM is able to add a user to a role.

  Links to documentation, tutorials etc. would be useful.

  I guess you're looking at approval workflow.

  The following can be used:

  Development of Workflows for approval and commissioning Manual - 11g Release 2 (11.1.2)

  In addition, many enjoy exercise of the SOA approval workflow is available by oracle.

  ~ J

• How to create buttons for each slide in the slide show

  I currently have a slideshow with prev and next buttons.

  but I would add buttons numbered for each slide to image-base.

  with a static number for the current slide has a circle colorful around this number.

  I can create static number with circle colored in Photoshop, and add a layer,

  but it's a lot to do this for all the numbers work.

  Is there a better way to create the numbers highlighted for the current slide?

  For the numbered buttons that link to the slides not active, I can create numbers in Photoshop and import images into Flash.

  then convert to symbols and assigns actions to them,

  But it's also plenty to do for all the numbers work.

  Is there a better way to create numbered slide buttons inactive?

  I would also like to have a function to hover over the numbered buttons,

  It changes from plain image from number to number with circle colorful as I want to use for the current slide.

  How can I assign a hover button symbol function, which will load another image or symbol?

  Try to think in terms of having reusable symbols.  Think what it through before you try it.

  Use a movieclip instead of a button symbol.  Have a dynamic textfield in this movieclip to the number and value of the textfield object to not be selectable.  Have a picture of this movieclip where it highlighted as one (selected) and the movieclip go there where you are on this slide.

  Use the textfield for the number - assign dynamically so that you don't have to import an image for it.  Use as many of these clips that you need for all your buttons.

  Have functions that reset all buttons at the same time so that when you move to a new slide, selected earlier dates back to mormal... following with setting one newly selected in his "selected" frame

• How to create content for my DMP - 4310G

  Hi all

  I am very new to my Cisco DMP - 4310g. I'm looking for some quick knowledge about how to get the content created and sent to play on my DMP.

  When looking for a player of signage, that I fell on the DMP - 4310g, reading the Cisco's Web site that explains the units looks like what I was looking for, but I was a little confused on how to get this operational thing. I contacted my dealer which I explained then to them that I wanted a player signaling that I could put in my reception area for visitors. I wanted something I could show images of society events, tickers for the news and maybe live TV streaming if possible. My dealer told me it's the unit, I needed. They said that I need the player DMP - 4310G and the DMP-4310-SW52-K9 software license (which allows me to create content?).

  Cisco's Web site was not exactly clear on how to create and publish content on these units, but I assumed that the license of the software they sent me was for the designer of digital media software. So, as you can see I'm stuck. I have the player and a software license (at least that is what it says on my packing slip), but how do I access the software Desginer? I can't find anywhere on the Cisco site to get it. How can I create content to display on the player?

  Help, please. I'm so confused. I have these two things, but where do I go from here?

  Thank you

  Steve

  Sounds like your dealer was not familiar with the solution. You can read the content on the DMP-4310 without the rest of the very, but it's a very manual process. The correct way to use the reader is to add the rest of the solution (Digital Media Manager, sign a license and licenses of DMP functionality). The design tool is part of the Digital Media Manager.

  You can also see the arms industry. They write software specifically for the 4310 DMP who will make content creation and management of small deployments as you have.

  I'd be happy to help you if you need help.

• How to create access for members only?

  Hello

  I would like to know if it is possible to create access for members with Adobe Muse.

  Thank you

  Hello

  Please take a look at the following threads

  Login using Muse and British Colombia page

  Muse login form!

  Can I create a login/password in the Muse for a HTML5 page or two?

  Let me know if you have any question.

• How to create subtitles for a button?

  Hello!

  I really tried to find the answer to this ridiculous problem on mine, but without result. Please help someone!

  The situation:

  I have a menu with three choices: 'Play Movie', 'scène Sélection' and 'subtitles '. Now, the text with these choices are part of the image background, created in the first (the program that I know best). They are written with an old typewriter to get that gritty feel.

  I want the user to navigate between these 'menus '. The currently selected item should be indicated by a black circle/point/point before the item text. By default, when the menu appears, there is a black circle in front (to the immediate left of) the element "Play Movie". The user should now be able to intervene with its remote control, the other points, thus making the circle black in front of 'Play movie' disappear and instead of other elements. In short: the black circle is always show before the currently selected item. OK, I got there a little chatty, but the idea got across hopefully. One more thing: the background color is white to 100%.

  So far, my solution was this: I placed Black circles (small images with graduation and everything, very nice looking) before all THE THREE ELEMENTS. Can I convert these into buttons. Then I choose the color defined for the menu so that the unselected state is 100% covering the Black circles that should not see white, pure and simple, with an opacity of 100%. Only in the opacity of selected and active States for the fall of subpicture for button at 0%, revealing the black circle that must be seen.

  The problem? Well well, on some DVD players (not on the XBOX 360 so), when an element is activated, all three circles show a brief moment until the selected action begins (the movie playing for example). It also happens in preview again. It's not logical at all and looks amateurish. I don't know why it happens, but my guess is that it would not be if I did it the 'proper' way: by creating a subpictures fo the buttons in the shape of circles. I understand that the gradations seeks beautiful must go out of the window, but it's a price I'm willing to pay.

  But now I encountered an unexpected problem: I do not understand how to create a subpicture for button who is a black circle. It seems the documentation in still and on the forums generally takes for granted that you know how to do this.

  What I tried was this: I created a monochrome, small image in format bmp - a black circle on a white background. But this picture just shows up as a black rectangle in yet.

  What should I do? I must add that I have no real experience with Photoshop, so go slowly if you go.

  Kind regards

  Nikolaj

  Basically, when we realize the limitations of the secondary image highlights, as defined by the DVD-plug., it is easy to see the "Workaround".

  A couple of aspects of subpicture highlights are:

  1.) 2-bit color (either ON or OFF), in a color scheme limited, with degrees of transparency (as opposed to the opacity of the PS).

  2.), they will appear on top of anything else on the Menu, including things like text/graphics buttons.

  By building your secondary image to highlight in PS, you can use the masking allows you to set where it will be, and where it will not. In the case that prompted my article, the poster had a series of text buttons and the secondary image highlights were formed from this text. The poster did not like the look of these 2 bits stepped colored blocks covering the text in the button. The solution is to "a hole" in the subpicture Highlight, so that it is hollow, there where the text of the button. This in the PS, using the "outline" of this text to create a mask to highlight of the secondary image. The appearance in staircase can be adjusted a little, using a degree of transparency (defined in the No - Auto Color Set back in again). We always have a color 2 bits subpicture Highlight and she still overlays of text for the button, but now there's a hole in it, just where the text of the button is located, and it is seen through this hole. The introduction of transparency has the Visual effect to "soften" the appearance of the color of 2 bits, even if the edges are still there - they look just softer. I went to show how we can even use a second secondary image point out, it's just a little bigger than the first and more transparent to simulate a "glow". Now, we can have a real "glow", because we are limited to this 2-bit color to highlight the secondary image, but we can simulate it.

  A large part of what makes a designer is really light hand - illusion. They all have to work within the limits of the specifications DVD (or BD)., but with a little creativity, planning and other work in PS, and yet, they can create enough smoke and enough mirrors allows to deceive the user into believing that what they think they see skirt the DVD specifications. They did not, but here comes the illusion.

  We receive many questions from people who would say that one commercial DVD, or another, a full-color subpicture highlights, and they complain that yet can do that - only 2 bits subpicture highlights. What they see, but don't realize, isn't fooled Menu, with a color chart and no real subpicture highlight visible. Jeff gives all the details on this operation. Even for those who have seen a button with a miniature of duo-tone, which transformed into color, when the button is navigated to. Wow, how did, and why Adobe Encore can do that? Well, what they saw was fooled Menu, with a full color sticker and not point out visible real subpicture.

  Jeff shows how to create what seems like at least a secondary image 3 colors to highlight. It's really just 3 regular 2-bit subimage color highlights, with masking to create the illusion that he has beaten the DVD specifications. Neat! [From the USA, I also liked that he used the American flag, but he could have chosen the "tricolor" French, or any other flag, without work.]

  Here are all the tips of righteous, but if the user buys in the illusion, which is?

  Enjoy,

  Hunt

  PS - if much larger positions, the elderly were lost, when the forum change that's happened, I strongly suggest to read the posts here. You can ignore those that don't offer anything, but almost every possible illusion was considered at least once, and probably a lot, with some of the different workflows offered by those who responded. Great reading.

• How to create the report in the following form?

  Hi all
  
  How I use studio EN to create reports.
  I want to create a report that will show me accounts and accounts of each entity, which means I want to keep the entity in the size of the page in the dimension of the line. The report should be done in such a way that if I take an entity in the dimension of the page then it will show a few accounts in the dimension line that
  are specific for this entity and in the same way, if I take another entity in the dimension of the page then it should show me another different set of accounts in
  the dimension of the row corresponding to this specific entity.
  How can I do this in my report?
  
  
  Thank you

  There are two ways that you can achieve this goal.

  You have never given in combinations of entity/account disabled? If this isn't the case, I would like to delete missing lines.

  Is there the potential for existing data in invalid combinations of entity/account, then I would create a specific account that defines the valid combinations. Think of it as a Boolean, a value of 1 for the valid combinations or 0 for invalid combinations. I would then use the 'Advanced Options' en to delete values based on this account.

  Hope this helps,
  -Jake

• How to create seekbar for the generation of animation in flash, html5 canvas

  Hello

  I've created an animation in html5 canvas option in flash CC. I want to control the animation by using the seek bar (progress bar). Can someone guide me how to create the same.

  Thanks in advance.

  var totalFrame;
  var unitFrame;
  var unitSlide;
  var playMode;
  var sliderInitX = 0;
  var currMovie = this.parent;
  var _this = this;
  var BarMc = this["barMc"];
  
  function setSlider()
  {
    totalFrame = currMovie.timeline.duration;
    unitFrame = (totalFrame / (BarMc.nominalBounds.width));
    unitSlide = (BarMc.nominalBounds.width) / totalFrame;
  
    _this.sliderBtn.x = sliderInitX;
  
    playMode = true;
    setInterval(function(){onEnter();}, 33);
  
    BarMc.addEventListener("click", onClick);
  
  }
  
  function onClick(evt)
  {
    var stageXpos = stage.mouseX-(58);
    _this.sliderBtn.x = stageXpos;
    var movFrame = Math.round((_this.sliderBtn.x - (BarMc.x-(BarMc.nominalBounds.width/2))) * unitFrame);
    if ((movFrame< currMovie.timeline.duration) && playMode && (currMovie.timeline.position != currMovie.timeline.duration)) {
    currMovie.gotoAndPlay(movFrame);
    } else if (movFrame > currMovie.timeline.duration) {
    currMovie.gotoAndStop(currMovie.timeline.duration);
    playMode = false;
    } else {
    currMovie.gotoAndStop(movFrame);
    playMode = false;
    }
  }
  
  setSlider();
  
  function onEnter(){
    if (playMode) {
    _this.sliderBtn.x = BarMc.x + (unitSlide * currMovie.timeline.position) - (BarMc.nominalBounds.width/2);
    if (_this.sliderBtn.x > (BarMc.x + (BarMc.nominalBounds.width))) {
    _this.sliderBtn.x = (BarMc.x + (BarMc.nominalBounds.width));
    }
    }
  }
  

  name = barMc bar

  and the handle = sliderBtn

• How to create benchmarks for a sensitive site in illustrator

  Does anyone know of illustrator plugins that will generate custom guides?  I'm looking for something like you can do it thanks to its function to create Guides in InDesign.

  Thank you

  Paul

  Draw a rectangle, then Objct > path > split into grid.

  Don't forget to check "create landmarks.

• How to create the main effect of this pattern that I found?

  Hello

  I found this very cool model:

  http://www.RevoStock.com/after-effec...photo-show.htm

  But I don't know how to recreate. Any ideas on how to make the video starts and stops as it does in the model. Also how to create color effects at the beginning and stop the video.

  All advice would be appreciated or if there is a similar tutorial that would be perfect.

  Thank you

  Simon

  Precompose, nest and, above all, allow time-remapping.

  Search the help system and yoru favorite online tutorial sites for these items. Who will help you get started.

  bogiesan

• How can I make an osteonecrosis affects the form that will be present and send the pdf as an email?

  How to make a button on the form that will be present and send the pdf as an email?

  You can set up a button with an action to "Submit a form" and use a URL of the type mailto to specify the email address, you have the forms sent. If you want to send the whole PDF, select this option and not FDF or anything else. The mailto URL must not include spaces and the part "mailto" must be lowercase, as:

  mailto:[email protected]
  

  It will try to open an e-mail by using the users default email client. If the user has not implemented a or there is another problem, the email could not get started. If she has to work with versions of reader before 11, the form must be activated for the reader, what you do in Acrobat 11 selecting: file > save as other > Reader Extended PDF > activate tools more