How to create several users at once.

Similar Questions

• How to create a user local administrator with the user root on the CV

  As says the tile, how to create a user local administrator with the user root on VCS-Express. I lost the password and cannot log in as an admin user, but I can't seem to log as long as user root.

  Once connect you with the root account, type in "tsh", from there, you can create the accounts of local administrators with 'xCommand AdminAccountAdd.  See the reference section of command of the VCS Administrator's Guide, starting on pg 517.

  If your VCS is a virtual machine, you can change the password of admin with vSphere, or if it is a hardware appliance, you can use the serial port, see pg 312 of the Administrator's guide.

• How to create a user-defined Service

  Hello

  The Microsoft article "How to create a User-Defined Service" is very explicit. I understood how to deploy a file .exe as a windows service. But my executable creates and writes a .txt file that I do not see that appear when I starts the service. I have to do something special?

  Thanks in advance, supertreta.

  I found the answer: she was on C:\WINDOWS\system32. Sorry for my precipitate question.

• How to create a user-defined function?

  is there a substitute for the exe instsrv and srvany in Vista?

  I don't know what means your post, so here's how to create a user-defined function:
  1) click Start
  (2) select "Control Panel".
  (3) select "system and maintenance".
  4) click on "Administrative Tools".
  5) click on "Task Scheduler."
  (6) click on "create task" (right in the list pane under) "Actions") "
  "(7) opened in the general tab it will choose if it only works when the account that is used to implement is connected, or ' if that user is logged in or not" (leave the box ' do not store the... "empty password)
  (8) always in the general tab, check the box 'run with highest privileges '. (This will ensure that no program can block)
  (9) type a name for the task (in the general tab)
  (10) to set the job to run an awhile, use the "triggers" tab, if you want to set a task runs after xx min. temps_inactivite, choose the 'conditions' tab, then choose the desired time.
  (12) click on the 'actions' tab click on 'new '. in the program/script line, search for and select the program you want to run, and then click Open.
  13) click OK in the window "create a task".
  14) click OK again and you are done.
  I hope this helps.

• How to create several classes of cascade?

  Goal: Create the button to start and stop the service.

  Situation: One button works.

  However, whenever I click on another button, the button does not work.

  Question: how to create several classes of cascade?

  or something wrong in my code?

  Mini code:

  Calls a CPP QML.

  ApplicationUI::ApplicationUI (bb::cascades:Application * app): QObject (app)

  {
  QmlDocument * qml = QmlDocument::create("asset:///main.qml").parent(this);

  CameraWrapper * wrapper = new CameraWrapper();

  QML-> setContextProperty ('wrapper', wrapper);

  AbstractPane * root = qml->() createRootObject;
  App-> setScene (root);
  }

  And then, QML calls another RPC.

  import bb.cascades 1.0

  {Page}
  {Of container
  layout: {DockLayout}
  }
  Button {}
  text: qsTr ("Start")
  onClicked: {}
  wrapper.startRec ();
  }
  }
  Button {}
  text: qsTr ("Stop")
  onClicked: {}
  wrapper.stopRec ();
  }
  }
  }
  }

  The main CPP:

  #include "cam.hpp".

  using namespace bb::cascades;

  {CameraWrapper::CameraWrapper()}

  int CameraWrapper::startRec() {}

  This button works.

  }

  int CameraWrapper::stopRec() {}

  This button does not work.

  }

  The main.hpp

  Class CameraWrapper: public QObject
  {
  Q_OBJECT
  public:
  CameraWrapper();
  Virtual ~ CameraWrapper() {}

  Q_INVOKABLE
  int startRec();
  int stopRec();
  };

  Thank you for your attention,

  Finally, we use the thread to solve the problem.

  Solution:

  loopWrapper (void * test) {void *}
  CameraWrapper * a = (CameraWrapper *) test;
  a-> startRec();
  return null;
  }

  setFlagWrapper (void * test) {void *}
  CameraWrapper * b = (CameraWrapper *) test;
  b-> setFlagFalse)
  return null;
  }

  void * CameraWrapper::setFlagFalse (void * arg) {}
  exit_application = false;
  fprintf (stderr, "Flag changed to false\n");
  return arg;
  }

  void CameraWrapper::runLoop() {}
  pthread_create (& thread_a, NULL, & loopWrapper, (void *) this);
  }

  void CameraWrapper::runSetFlag() {}
  pthread_create (& thread_b, NULL, & setFlagWrapper, (void *) this);

• How to create the user account using the command?

  How to create the user account using the command?

  Open cmd as administrator, and then type the following commands one after the other

  NET user / add program mypassword
  net localgroup administrators program / add
  net share concfg * C:------/ grant: program, complete
  This will create a user account with the name "Program" and the password "MonMotpasse".

  You can create the user name and password of your choice.

• How to create a user interface, where my customers can create an account with my site

  How to create a user interface, where my customers can create an account with my site

  Hello

  Some associates of threads

  Re: How can someone create an account / register on my site?

  Re: Can I create a login/password in the Muse for a HTML5 page or two?

  Let me know if you have any question.

• I created several users, all have administrator rights, however... that one user appears on the login page. Help...

  New iMac, I created 3 users, all who have administrator access.  However, only one user and the guest user appears in the login page... .in order for me to move on to the other two admins I have to identify you so that a user, and then sign out... at this time I am able to see the other two users to the login page.  How can I fix this?

  Are you using FileVault? If so, you need to allow other users unlock the screen. Or turn off FileVault.

• How to create several option buttons in dialog related?

  As in the title.  I am trying to create a user interface in which each radio button in dialog operates a group of controls and options and translates into a subtly different execution of VI.  Only one radio button dialog option are selectable at any time.  Keeping in mind I use LabVIEW 6.1 (just if you don't go suggesting one of these last functions Cree ) if someone could suggest a way to achieve my goal.

  You thanking all in advance...!

  James

  P.S. I can't reach my 'code' that I it starts from scratch.

  No control radio in LabVIEW 6 button...

  There is an example provided with LabVIEW 6 that showed you how to simulate a group of radio buttons.  It is in the section "Advanced examples-> customization control and VI examples-> Custom Control Examples". It's (correctly) called "simulating the Radio buttons.

• HP 15-p097tx: how to create a recovery media once more

  Is their any option to create recovery media once more? If not, then how can I get my laptop back if it becomes a problem in the future?

  This is my description of the product:

  HP 15-P097TX

  Windows 8.1 (64-bit)

  Hello mdja,.

  What do you mean by "creating a media recovery once more?

  Ask yourself how to create the media for the first time or you already have a set and need a 2nd set is made?

  IF for the first time, go to this link c04399755 and start on page 55 of the manual. It will explain how to create media and how to perform a restore.

  You can also go to this link for more info: HP computers - create a recovery Image on disk, or save a recovery Image on a Flash drive (Windows 8) | HP® support

  If you have already created a set of media, no matter if its were DVD or a USB key, you cannot create a 2nd set according to the HP license agreement.

  IF you need a 2nd set of media, you will need to buy only from HP directly for a small fee.

  Contact HP worldwide | HP® official site

• How to create several site VPN on Cisco 2801

  Hello

  We use 2801 to our VPN needs. We have already configured a VPN site-to site inside. My current scenario is to create several VPN IE at different sites and a remote client VPN server for our road warriors (they use a cisco VPN client to connect).

  Let me know how can I achieve that scenario. Currently we have in VPN profiling in place. can I fill the script using VPN profiles, how it can be used. Kindly advice me at the earliest.

  Please find attached the 2801 direct configuration file, which is quite works very well

  Thanks in advance.

  Djamel.

  Djamel

  As much as I know it does no harm to have political isakmp 9 and isakmp 10 with the same parameters in each of them. But it also is not good. Others that extra isakmp policy I don't see anything that seems problematic in the config you have posted.

  HTH

  Rick

• How to create a user of peoplesoft

  Hi all

  FSCM90 and 8.49 tools I have not PSAPPS as a user in the PSOPRDEFN table.

  I can't AS and PS because of this. Then, cannot access the WEB (4 levels).

  How can I create this user?

  Thank you.

  FSCM try to use user VP1.

• How to create several contours growing with every distance equal to the original form?

  

  Here is a very simple example... It works with a circle or a square, obviously because he has the same height and width. The problem is when you have irregular shapes (or in this case, an oval). I know I've seen solutions to this in the past, but I can not just think how Word of this question and find them.

  I know that you can create several shots of an object in the appearance palette, but I'm looking for something more effective than simply STROKE color > white line > race color > white race > etc.

  Some examples of the kind of effect I'm looking for.

  

  

  Any help would be greatly appreciated.

  You must use the path of the Offset. Object > path > offset path. Use negative numbers to go inside a form existing, positive to go outside.

  [signature removed by the host of the forum - advertising is prohibited]

• How to create several youtubeclips in different videocontainers

  Hi guys,.

  I'm new on board and in this forum:

  I read the entire discussion about creating several youtube clips in a single container:

  http://forums.Adobe.com/message/4722007#4722007

  Do I have to do is have different containers on the same page with different you tube videos.

  I tried a single container and the method suggested by RUSSmsn:

  ///////////////////////////////////

  ///////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////

  1. RussMSN,.

    

  18-game-2012 5.05 in reply to Kirch12

  So, as I did it was like this:

  Create the button and open the code for this button.  Create a click action.  In the code pane, paste this:

  var youtubevid = $("< iframe/>");
  SYM.$("vContainer"). Empty(). Append (youtubevid);
  youtubevid.attr('type','text/html');
  youtubevid.attr('width','425');
  youtubevid.attr('height','350');

  youtubevid.Attr ('src','http://www.youtube.com/embed/ykF1y2EJ2nI');  URL/Video_Id
  youtubevid.attr('frameborder','1');       // 1 | 0
  youtubevid.attr('allowfullscreen','0');   // 1 | 0

  That what is empty the existing vcontainer and place a new one with the new youtube video.  You can add this to many buttons that you obviously want change the URL ID for each, and it must exchange the video for you with a click.

  Hope that helps!

  Russ

  ///////////////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////

  ///////////////////////////

  and it works perfectly...

  The problem is that I want to add more videos in the same page...

  I tried to create

  var youtube2 and vcontainer2, but it did not work...

  So I tried to move my first vcontainer to the second position in my page adding a label "button2":

  startup code

  SYM. Play ("button2");

  var youtubevid = $("< iframe/>");

  SYM.$("vContainer"). Empty(). Append (youtubevid);

  youtubevid.attr('type','text/html');

  youtubevid.attr('width','800');

  youtubevid.attr('height','390');

  youtubevid.attr ('src','http://www.youtube.com/embed/ykF1y2EJ2nI'); / / url/Video_Id

  youtubevid.attr('frameborder','1');       // 1 | 0

  youtubevid.attr('allowfullscreen','0');   // 1 | 0

  end of the code

  but this solution did not work or...

  I wonder if it is possible to have 2 videos on the same page...

  I have followed the suggestion of .heathrowe:

  http://www.heathrowe.com/Adobe-edge-preview-4-append-YouTube-video/

  Once again in the action panel step after creating a ready composition, I tried to add a second youtubevid2 var and a second vcontainer2 of container like this:

  beginning

  var youtubevid = $("< iframe/>");

  SYM.$("vContainer"). Append (youtubevid);

  youtubevid.attr('type','text/html');

  youtubevid.attr('width','800');

  youtubevid.attr('height','390');

  youtubevid.attr ('src','http://www.youtube.com/embed/GqcPh3OXoNo'); / / url/Video_Id

  youtubevid.attr('frameborder','1');       // 1 | 0

  youtubevid.attr('allowfullscreen','0');   // 1 | 0

  var youtubevid2 = $("< iframe/>");

  SYM.$("vcontainer2"). Append (youtubevid);

  youtubevid.attr('type','text/html');

  youtubevid.attr('width','800');

  youtubevid.attr('height','390');

  youtubevid.attr ('src','http://www.youtube.com/embed/DF6QvYNHjQ'); / / url/Video_Id

  youtubevid.attr('frameborder','1');       // 1 | 0

  youtubevid.attr('allowfullscreen','0');   // 1 | 0

  end

  -but still once, it did not work

  To be clear, I want to create a page similar to www.bestofyoutube.com with a list of two or more videos in the same page...

  Any suggestions?

  Thanks in advance

  For you second instance you forgot to change the references to variables, changes in bold below

  var youtubevid2 = $("");

  SYM. $("vcontainer2") .append (youtubevid2);

  youtubevid2.attr('type','text/html');

  youtubevid2.attr('width','800');

  youtubevid2.attr('height','390');

  youtubevid2.attr ('src','http://www.youtube.com/embed/DF6QvYNHjQ'); / / url/Video_Id

  youtubevid2.attr('frameborder','1'); // 1 | 0

  youtubevid2.attr('allowfullscreen','0'); // 1 | 0

  Darrell

• How to create a user of SQL server back-end interface using Dreamweaver Wizard

  Hello

  I want to test a database application that uses SQL server as backend.

  To test I want to create web user interface using c#. As I remember in dreamweaver there is a wizard to easily.

  But I can't find it now. Please let me how do

  I'm using CS5.

  Thank you

  flashmark1 wrote:

  I want to create web user interface using c#. As I remember in dreamweaver there is a wizard to easily.

  But I can't find it now.

  ASP.NET support has been removed since Dreamweaver a while ago (in CS4, I think).

  If you want to restore the ASP.NET server behaviors in CS5, you must install ASPNet_Support.mxp, which is located in C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CS5\configuration\DisabledFeatures in Windows or similar location in the Applications folder on a Mac.

  The server behaviors are are no longer officially supported, but they perform the same functionality as in earlier versions of Dreamweaver.