Similar Questions

• How to create workflows CPO... video of training

  Is that what anyone has the training videos for understnading of CPO workflow or how to create Prsocess...?

  Thank you

  I did a lot of content regarding the training.

  Refer to the video section on this site @ https://supportforums.cisco.com/community/netpro/data-center/intelligent_automation/teo?view=video

  In particular, this video speaks to the creative process: https://supportforums.cisco.com/videos/2150

  Since you are a cisco employee, I suggest you visit the wiki page of the TAC @ http://wikicentral.cisco.com/display/IABUS/PROAUTO+Queue and refer to "TEO Support Training". There are a ton of videos I've done over time it.

  -Shaun Roberts

  CPO/CIAC Support lead

  [email protected] / * /.

• HOW TO CREATE AND MANAGE APPLICATIONS OF PLANNING CLASSIC ON EMP 11.1.2.4

  Hi all

  We installed and configured 11.1.2.4 EMP, and was happy to work on planning that was created by using the workspace EPMA until we came across a requirement for reports plan type, coming to the point:

  1. in the EMP 11.1.2.4 how to create a classic application and how to perform administrative tasks, any suggestions would be helpful.

  2 if we conduct EPMA planning application, then how to convert it into classic?

  concerning

  Shahrukh

  Try to run it with - Setting of Applications Using Planning Application Administration

  Is what I'd do to convert a conventional application of EPMA

  Set the property to true EDIT_DIM_ENABLED - Management of Dimensions in Planning Applications deployed

  Restart the planning

  Extract the application of planning using LCM.

  EDIT_DIM_ENABLED property set to false

  Restart the planning

  Remove application EPMA

  Import the backup LCM to build the new classic application.

• IOM: How to create workflows for demand

  11 GR 2 IOM 11.1.2.2

  How to create a workflow to IOM, where an administrator (except xelsysadm) in IOM is able to add a user to a role.

  Links to documentation, tutorials etc. would be useful.

  I guess you're looking at approval workflow.

  The following can be used:

  Development of Workflows for approval and commissioning Manual - 11g Release 2 (11.1.2)

  In addition, many enjoy exercise of the SOA approval workflow is available by oracle.

  ~ J

• How to create a wait function on a standard workflow

  How to create a custom on a standard workflow, wait function

  I'll create a lookup in Oracle (fnd_lookup) and insert the date and time in it

  Ex:

  Code = my = 01:00 sense

  Code = sea sense = 04:00

  Now before you send any request for approval to the Manager, Workflow must first check these long and put a hold/waiting on the workflow...

  If the user changes the day or the hour in research during the waiting/waiting period should honer the new time and move to the next step/process with in the workflow.

  How to add us to this point and build the wait event in the standard workflow process

  Thank you...

  Wait

  This function stops the process for the time that we have specified in the attribute of the activity during the workflow design. The feature of wiat may work for

  (a) a specific date

  (b) a particular day of the month

  (c) a certain day of the week

  (d) relative time (a period of time after this activity is encountered).

  Note:-1) when the process has hit the wait function, it goes to the status of deferred payment. We run engine delayed background to activities to determine when the timeout is passed. The background engine then completes the waiting activity so that the process can continue.

  (1) all standard features are available under itemtype Standard (internal name WFSTD).

  (1) create an attribute of the element of type text

  Internal name:-REMINDER_NOTIF_VAL_ATTR

  Full name:-Notification of recall of Val attribute

  Type:-text

  This attribute is set when approver is on its notification. Initially the value of the attribute will retain the Null value. So until the only approver access laws in his opinion, she will remain null and follow the path as shown above in the flowchart, i.e, will send a notification.

  (2) load the itme 'standard' type (internal name:-WFSTD) defintion of workflow in a window generator of separate workflow. To copy the standrad functions, please follow the following sequence.

  (a) Copy (ctrl + C) the type of search from Standby Mode (internal name:-WFSTD_WAIT_MODE) of the standard workflow (WFSTD) and Paste (ctrl + v) in our custom)

  workflow.

  (b) follow the same steps for "day of Month" (WFSTD_DAY_OF_MONTH), "day of Week"(WFSTD_DAY_OF_WEEK), "Comparison" (WFSTD_COMPARISON) ".

  If you consider your question/problem answered/resolved,

  Please do not forget to mark the Correct/good responses in the thread. It helps other users of the community to identify the solution quickly!

  Kind regards.

  Ajith

• Bookmarks Manager no longer exists on 7.01. How to create folders and organize my favorites?

  Bookmarks Manager no longer exists on 7.01. How to create folders and organize my favorites?

  I don't use a Mac, but I think it is similar. Organize bookmarks, is renamed the show all bookmarks option.

  • Seecreate bookmarks to save your favorite Web pages

• How to create a rule of action to subtract from the Ips event log manager console express?

  How to create a rule of action to subtract from the Ips event log manager express console?, some unknown has a guide?

  Thank you.

  Sent by Cisco Support technique iPad App

  Hello

  http://www.Cisco.com/en/us/products/sw/secursw/ps2113/products_tech_note09186a0080bc7910.shtml

  HTH

  Luis Silva

  "If you need IDP (planning, design, implementation) assistance do not hesitate to contact us.

  http://www.Cisco.com/Web/partners/tools/pdihd.html

• How do other companies manage orders without internal costs?

  Hello

  How do other companies manage orders without internal costs? Free of charge, which means that orders placed internally and charged to the company's specific services.

  We are looking to update our process underway, and I would like to hear how other companies handle this.

  If any questions, or if additional clarifications are needed please let me know.

  Kind regards

  Kailey

  In one recent companies that I worked, we have created a command type 'order of expenditure. "  Then, we created order lines for each service requiring the order free of charge.  We filled the expense account of COGS on the command line type. Then, we modified the workflow of CMV to use the expense account defined on the command line type.

• How to fire a manager class when consuming web service in java - weblogic

  With the help of Axis 1.4 I created client application that consumes the external server services.

  The response of the application server with the soap message that include tags header as well as the body tag.

  My problem with the header tag, I'm trying to find away to get the header element.

  What happened so far:

  I found that I need to use a handler that extends BasicHandler using this class, I can get the header tag. source: dealing with SOAP in the axis headers

  But how this handler to operate during the use of web services? I mean how to call this handler whenever I received the response from the server to get his header .

  Some articles suggest I should use .wsdd file. I use 11.1.1.7 with weblogic 10.3.6 Jdeveloper environment where I don't know web.xml configuration file.

  Question: How to bind this information (Manager class, .wsdd file and web.xml ) to collect and the Manager works for the heading tags?

  The best start was to check the Axis guide on: Apache-Axis reference Guide where you will have an overview of the workflow. (Thanks to Timo)

  To configure the handlers be trigger on the client side you need to do the following:

  1- Create class Manager basically something similar to the following:

  package mypackge; 
   import javax.xml.soap.SOAPException;
   import org.apache.axis.AxisFault;
   import org.apache.axis.MessageContext;
   import org.apache.axis.handlers.BasicHandler;
   import org.apache.axis.message.SOAPHeader;
   import org.apache.axis.message.SOAPHeaderElement; 
  
   public class SoapHeaderConsumerHandler extends BasicHandler
   { 
       public void invoke(MessageContext messageContext) throws AxisFault 
       { // Your logic for request or response handling goes here. 
        // Basically you need to make use of the parameter 
       // messageContext where you can access the soap header and body tags. 
       } 
  }
  

  2- Create the client-config.wsdd file. It will look like the following:

  http://xml.apache.org/axis/wsdd/" xmlns:java="http://xml.apache.org/axis/wsdd/providers/java">
    
         
             
        
    
   
  
  
  

  You can see that I only use handlers for incoming response side server. So whenever the client application receives a response from the server the class Manager SoapHeaderConsumerHandler is triggered and the method invoke will be called by default.

  Note: if you want to access the outgoing request before sending to the server you need to add an additional label for to add the request handler.

  Check the Reference Deployment (WSDD) of the guide of the axis:

  3- Where to place the client-config.wsdd file?

  You will need to place the .wsdd file in the working directory. You can easily find the location of the working directory using:

  System.out.println("Working Directory = " + System.getProperty("user.dir"));
  

  Source: Get the Current Working Directory in Java

  You just place the .wsdd file here.

  Useful links:

  Where to place the file client - config.wsdd in Railo

  Handler axis V It is an example to managers of the side server.

  Dealing with SOAP headers in the axis

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• How to create only a recovery of the operating system?

  I understand Recovery Manager installs everything, including the factory etc. applications. I just bought a new HP desktop computer and I am interesting to have only an operating system recovery disks or method to install OS only from the recovery disc.

  Is this possible?

  If this is not the case-how can I get support for the operating system that came with the computer?

  Thank you

  Hello

  You should find that you have the ability to perform a system restore minimized when you use Recovery Manager who will just reinstall the operating system and the original, but without the additional software drivers.

  However, what I think personally is a better option is to create a System Image - the main advantage of this is that you can get the operating system exactly as you wish (all updates/service packs applied, all software installed, personal files, etc.) and then create the image.  This way, if you need to reinstall, you get the PC to exactly the State in which it was when you created the image.  It's even easier with Windows 7, as the possibility of creating a System Image is built.  See the guide below for details.

  http://www.howtogeek.com/HOWTO/4241/how-to-create-a-system-image-in-Windows-7/

  I strongly recommend to always create your recovery discs - you are not too sure.

  Kind regards

  DP - K

• How to create a second partition on the hard drive?

  Hello to all members!

  I recently got some virus on my laptop. So I had to use my recovery cd to recover my system.
  Now the problem is that I have asked me for the partition where are the files are being extracted. I scored at 30 GB.
  Thus, windows works fine but do not appear my rest of 50 GB.
  I thought that the recovery cd will make a second partition as well, but he did not. Now how some other partitions?
  Second question related to the first is how long I can use this recovery disk. I mean windows will remain genuine?

  For the problem of the partition, I don't know of a few possible solutions of cause that I had need of three partitions, 30 GB 1st (Windows default) and two others of 25 GB.
  The best Solution to come in my mind is to make any windows ME or 98 bootable cd and run fdisk to create the remaining partitions.
  But's done it some new questions in my mind. Do I have to use a recovery again cd? If so I don't use this process causes once again he'll wonder partition extract windows files and I will choose 30 GB again.
  And again, it will remove additional partitions.

  Please, help me and erase the questions coming in my mind...

  [Edited by: admin on March 31, 2007 08:32]

  Hello

  Partition Magic 8 is my favorite.
  I use it to create partitions, Manager, mobile, etc. This tool is really great.

  > To how long I can use this recovery disk. I mean the windows remain authentic?
  I put t know what you mean exactly, but the image on the recovery CD is already activated and genuine.
  It s a full version of Windows OS

• How to create an executable

  Hello, I try to figure out how to make an executable file of LabVIEW. This is my first time ever create an executable, so I need instructions to the base. I tried to do by using the project manager. The created file must LabVIEW Run-Time in order to work.

  Is it still possible to have a LabVIEW program and create an executable file that would let to any computer without products OR run the application?

  Also, I searched a few instructions on how to do it but could not find all those useful. If anyone can direct me to a post or a set of instructions that explain how to create an executable file that would be perfect. Thank you!

  Here is a link to a tutorial

  LabVIEW Application Builder application delivery

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3303

• How to create a table in if/else or structure without 0-case?

  Hello

  I tried to do for a while now.

  I only managed to think about this in three ways:

  1. (what I'm doing right now create the table through a loop for, fills the table in automatic indexing.) Filled it with many of if true and with a '0' if the value false. The idea was to remove the 0 later in the code. However, this seems very inefficient.

  2 make use of a registry change, which automatically adds the correct number of a table. The problem is that the table will keep growing and growing and at the very least would enormously slow down my program. At worst, it would break.

  So my question is: how to create a table that if a comparison is true, it puts the item in and if not, it does nothing?

  I have attached a PNG of my code snippet.

  Kind regards

  David.

  If you want to only affect exactly as much memory as you need for the table, you can count the number of true elements in the table of Boolean everything first and then assign one of exactly this size. In this way, you are more memory and time-efficient whether overuse (such as allocation of an array of I32 as big as the whole table boolean) or underallocating (from zero element and let it grow automatically whenever you add on).

  Count the true values, allocate an array only the great and then replace each value in this new table with indexes / "I ' value where the real exists." An excerpt from VI:

  

• How to create a shortcut to toggle the sound device?

  Anyone have any suggestions on how to create a shortcut to toggle the USB audio device in Device Manager?

  A shortcut is to enable this device, and the other shortcut is disable this device.

  Thanks for all the suggestions

  Hi oem7110,

  · Why you want to create a shortcut to enable or disable an audio device from Device Manager?

  You will be able to create the shortcut to Device Manager but no shortcut to enable/disable a device in Device Manager:

  a. right-click on the space empty where you want to create a shortcut

  b. click the shortcut

  c. in the type of space empty in devmgmt.msc

  d. click Next and follow the instructions in the wizard.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.