How to decode the error?

Similar Questions

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• How to explain the error in the executable file?

  As everyone knows, there are 3 parts to the cluster of error: status and source code. The State's flag, the code is the error code and the source is where Labview think that the error occurred. Normally, when I'm in the environment labview course I can just right mouse click the error and click "explain the error" and a description and detailed error possible cause rises.

  However, when I create an executable I don't know how to explain the error to the user, such as labview.

  When an error occurs that I wish I had a popup that says code error, source and EXPLANATION. The code and the only source is so enigmatic sound quite panic inducing the user, whether or not the error is unrecoverable/crash-inducing. Also this would save me having to search the online error code.

  How to make the explanation of the error code? There is a vi that I can enter an error code and get the explanation string?

  There is probably something simple I forget but I couldn't find the answer in my research. Thanks in advance for your help.

  Simple error handler and screw General Error Handler?

• How to solve the error 49 when the photoshop trial download?

  How to solve the error 49 when the photoshop trial download?

  Hello, Scarlett,.

  Please see the below help document to solve the problem:

  Download error, installation or update of Cloud Creative applications

  You can also see the thread below where the issue has been addressed:

  CC of Photoshop update failed. Download error 49

  Kind regards

  Sheena

• How to view the error logs in awm

  I just finished my cube of construction and it failed. How to view the error log itself for me to be able to know exactly what size are the original questions.  When using

  Select * from cube_build_log

  It does not give me the real dimensions causing problems?

  Please help

  Thank you

  There are several levels of logging, so I would need to know more before I can tell you that one to watch.

  • Have you built using MN or through DBMS_CUBE. BUILD?
  • What is the exact error you received?
  • What do you learn the following query?

  SELECT OUTPUT, BUILD_OBJECT_TYPE, BUILD_OBJECT, BUILD_ID

  OF CUBE_BUILD_LOG

  WHEN STATUS = 'IMPOSSIBLE '.

  ORDER BY TIMES DESC

• How to solve the error ORA-00001 in SQL Insert?

  Hi all, I need your help appreciated.
  
  I do a plsql procedure that inserts a line according to the value of the slider, I have error oracle ORA-00001: unique constraint (constraint_name) violated.
  
  This message may appear if a duplicate entry exists at a different level: in the RDBMS MySQL, I have the syntax IGNORES to solve this error of duplication... and in Oracle?
  
  Thanks for your time and your advice.
  Miguelito

  user6317803 wrote:
  How to solve the error ORA-00001 in SQL Insert?

  ORA-00001 means table a unique/primary key / index and you attempt to insert a row with the key value already exists in the table. I'll assume table has a primary key on COUNTRY_ID. Then modify SQL for:

  SQL = "INSERT INTO COUNTRIES (COUNTRY_ID, COUNTRY_NAME, REGION_ID) SELECT"BZ","BLZ", 3 DOUBLE WHERE DOES NOT EXIST (SELECT 1 FROM COUNTRIES WHERE COUNTRY_ID ="BZ").

  There is a good chance COUNTRY table also has unique key/index on COUNTRY_NAME. If so use:

  SQL = "INSERT INTO COUNTRIES (COUNTRY_ID, COUNTRY_NAME, REGION_ID) SELECT"BZ","BLZ", 3 DOUBLE WHERE DOES NOT EXIST (SELECT 1 FROM COUNTRIES WHERE COUNTRY_ID = 'BZ' OR 'BLZ' = COUNTRY_NAME).

  SY.

• How to fix the error "insufficient data" in Acrobat Reader 11.0.04?

  How to fix the error "insufficient data" for Acrobat Reader 11.0.04?

  Hi Johnkel1524,

  Please visit: http://helpx.adobe.com/acrobat/kb/insufficient-data-image.html

  Also, try to update on 11.0.5 and check.

• ODI: how to trigger the error return prior to loading in Essbase?

  Hi John... If you read my post, I want to say that you impress me! really, thank you for your blog.
  
  Today, my problem is:
  -J' received a poor quality of extract of ERP data file
  -J' saw the reference table (Source == > target)
  -> > How to trigger the error prior to loading in Essbase!
  
  My idea is this, (first of all, I don't know if it's a good thing, and also I have the problem to do in ODI!)
  -Step 1: make the JOIN between data.txt and cross-reference Table == > create a DATA_STEP1 table in the ODISTAGING schema (columns of DATA_STEP1 are adding data.txt columns than the table of cross references (... there more than 20 columns in my case))
  -Step 2: Control if there is no NULL value in the target column (NULL means that the data.txt file contains the value that are not defined in my Table of cross references) by using the filter (filter = Target_Account IS NULL or Target_Entity IS NULL or...)
  The result of this interface is sent to the queue of reject.txt - if reject.txt file is not empty, then a mail is sent to the administrator
  -Step 3: do the opposite: filter NOT (Target_Account IS NULL or Target_Entity IS NULL...) == > the result is sent in the DATA_STEP3 Table
  -Step 4: run correctly mapping: source: DATA_STEP3 (own and verified data!) with reference Tables and send data into Essbase - NORMALLY, it is not rejected record!
  
  My main problem is: what is the right IKM to send data in the DATA_STEP3 Table, which are the Oracle Table in my scheme of ODISTAGING or DATA_STEP1! I tone with Oracle IKM incremental update but I get error and in fact I don't need an update (which is a time trust), I just need an insert!
  "I'm just lookiing for a ' IKM SQL for Oracle...
  concerning
  Xavier

  Create a sequence in oracle, you use the sequence in the mapping of your target.

  < %="odiRef.getObjectName" ("l",="">","","< d="" ou="" w="">") %>.nextval"

  so, for example, it might be

  <%=odiRef.getObjectName("L","DATASEQUENCE","DATALOGICALSCHEMA","D")%>.nextval

  Make sure that you run the mapping target or intermediary.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to use the error at the level of the mapping table?

  Hi all
  
  Please tell me how to use the errors table in the mapping level or how to handle errors in mapping.
  I create a table of errors in oracle, but I don't know how to use it in the map.
  
  
  Thanks in advance.
  
  Kumar

  Hi Kumar,

  You use the Table of errors with the data rule.

  Error tables are used with logical errors (data rules) managers. Detailed description on the use of data rules is explained in the following document

  http://www.Oracle.com/technology/products/warehouse/PDF/OWB10gR2_ETLandBusinessRules.PDF

  In a nut shell, use of the tables of the error is the following.

  1 create a rule of data associated with a table (target table or a table in which you load data).

  2. use the table in a map as a target table.

  3 deploy the table and mapping.

  Now, in the schema target a single table will be created with the name _ERR. When executing a mapping data that violate the rule of data enters the error table.

  The following must be done to have the name of the wrong choice of the customers table.

  1. right click on the table and click Configure.
  2. give the name of the table in the section "name of the shadow table.
  3 pull out the table.
  4. use this table in a map. Now in the mapping on this table properties in the section 'Error Table name' the name of the table that is specified in 'the shadow table name' will be fulfilled.

  Thank you
  Fati

• How to ignore the error S.M.A.R.T. for El Capitan update?

  I have a disc with a Smart error. In my particular case, I know that it is relatively safe to continue to use my drive. I have error SMART attribute #173 (level of wear), but all these block replaced is arrived in the small volatile temp score, my main system partition is sure. In short, I know what I'm doing.

  I want to ignore this error and to force the update. How to do this?

  If you think it's worth, you can try to format the drive. I don't know any way to force the installer to ignore the error.

• How to debug the error 'tosrfusb.sys '.

  I was reading a pdf document, and all of a sudden a blue screen with the error message saying: "physical memory is discarded" appears.
  and at the top of the screen, it says: "DRIVER_IRQL_NOT_LESS_OR_EQUAL".

  Can anyone help me on how to debug this issue. the message continues to come all day for 2 days.

  Thank you

  Hello

  According to the Microsoft document, this problem can occur when the driver verifier is enabled and a driver has used an incorrect address.
  http://support.Microsoft.com/kb/293077/en-us/

  I also studied in the net and the defective RAM module was generally responsible for this blue screen message.
  If you use two modules try to remove one and test the memory.

• How to solve the error E:31:00 in a Camcorder HDR-XR160?

  I am very disappointed wth Sony quality. I chose this camera for the capacity of the hard drive and now I can't access all the videos of my family vacation. I would like to know how to grab the videos and restore the hard drive to the E:31:00 error.

  Hello Uls,
  Welcome to the community of Sony.

  Follow the steps below to reset the camcorder:
  (1) turn off the camcorder.
  (2) remove the battery or disconnect the AC adapter for 60 seconds.
  (3) Insert the battery or reconnect the AC adapter.
  (4) turn on the camcorder.

  Press the button to reset, using a small pin object did during 2-3 seconds, to reset the camera to factory default settings.

  If the issue is still unresolved, the camcorder will require repairs.
  See the link below to start the service request.
  https://eService.Sony.com

  Before launching the service request, you can contact the Sony Media Services support team to retrieve the files.
  You can contact them from this link.

  If my post answered your question, please mark it as an "accepted Solution".

• How to solve the error-1074396080 appeared in IMAQ Image color table

  Hello

  I'm above mentioned error.

  Here, I have attached my screenshot of the error.

  Could any one please guide me how to solve this error.

  I use kinect driver kinesthesia generating U24 Bit RGB Image and I want to convert it to Image IMAQ type, but I get an error mentioned.

  But when I do not use the acquisition of vision and vision assistant then every thing is good average is no any error which I have attached in annex 2.

  Please guide me how to solve this problem.

  Thank you very much.

  
  

• How to clear the error 314101

  I am trying to create a mechanism of robust communication between a cRIO and a desktop application HMI. I tried to use the network stream I could avoid a lot of pitfalls in the management of a TCP connection. My RT code must be written to operate, and must recover gracefully network disconnections and brutal power loss. I can simulate these things quite effectively pulling the Ethernet cable or hit the button to Abort in LV

  My goal of RT has a drive with the endpoint name ' commlink/drive '. My HMI has a burner with the name "commlink/recorder. HMI tries to establish the connection: he gave the Player URL ' / //commlink/player. This set works very well on the first pitch, but not after abandonment to the RT code. On the next run, the RT code often receives the error 314101 (endpoint with the same name already exists.) to create network Stream Reader Endpoint VI. I can't understand how to clear this error in order to recreate my end point and restore the comm link. Does anyone know how? Calling the destroy Stream Endpoint VI with refnum workflow does not work, and there are no other screws or properties that look like they manage the connection management.

  I know I'm coming to the end of the conversation, but maybe some of this information will still be useful.  While network streams were designed to manage multiple connection/disconnection cycles with the underlying TCP/IP connection on the network seamlessly, they were not intended to perfectly manage and survive many lives or running instances application with endpoints.  All this is still possible, it will take more work on the part of the implementer.  An important thing to remember when using network flow, is that once you've managed to connect the two end points, the destruction of one of the endpoints (via normal stop or an accident) will require the destruction of the other end.  This means that you cannot simply reuse on RT target endpoint to communicate with several sessions of HMI.  Instead, you will have to destroy endpoint on the target of RT and create another endpoint (probably with the same name) for the next session.

  To do this, I recommend a state machine that is basically:

  1. Create an endpoint - you can do either with an infinite time-out or a continuous loop with a timeout if you need meet orders of demolition/judgment of the user.
  2. Continuous read/write in the flow in a loop.  If at any time you receive a fatal error of read/write, leave the loop.
  3. Destroy the end point and return to the State first, where you can wait for the next connection.

  I would avoid going down the road of trapping of the specific error codes and writing conditional logic for each of them.  Network stream API was designed such that for most / all cases, you should should not do this.  If you have a healthy stream that can still move the data, you will not be getting errors from the read or write call (apart from a few things matter as if we were trying to read from an endpoint unique writing of corner).  If you get an error in reading or writing, it usually means your workflow is dead and you need to create a new one if you want to continue to communicate with the remote application.

  If you follow the above, I think that you are 90-95% of the way.  As the article you link above mentions, there are additional considerations to take into account if you need to tolerate the application crashes / accidents of remote endpoint.  In these scenearios, you basically have one of the three results of the application that always uses the end point which don't collide:

  1. Demand will start to return errors:  In some scenarios, we can detect the remote application is crashed, abnormally terminated, or whatever.  In these cases, the read/write will return an error and the same pattern described above should work.
  2. The flow will introduce a disconnected state and stay offline:  This would generally happen with a fall in demand.  In these cases, we cannot tell if the connectivity loss is due to a problem with the application or poor network conditions / remote computer.  If you need to detect and recover from this scenario, you can do as a section of the link recommend you and write a timer that resets the stream network if the flow remains disconnected for a period of time.  This could be incorporated in step 2 of the above state machine quite easily.
  3. The flow will continue to make a State connected, even if the remote application is no longer functional:  This should rarely occur and would occur only when the application on the remote computer hung or an impasse, but the network computer stack is still in operational condition.  In this case, we cannot differentiate between a suspended application and the other simply has all the data to send.  If you need to detect and recover from this condition, the best thing to do is probably to create a second timer that resets the stream if it's too long you've changed successfully read/written all the data.

  I must emphasize scenarios 2 and 3 can be greatly simplified if you care to detecting the crash & block until another application attempts to connect to the application that is still ongoing.  For example, restarting the application has crashed/hung will recreate an end point and try to re-establish the connection of flow.  At this point, the application which is still running will go account he communicated with endpoint remote must have crashed and raises an error.  At this point, the same state machine mentioned above should be sufficient to re-establish the connection.  I think that this part could be more difficult in LV 2010 since the first attempt to apply newly restarted it also throw an error when you try to reconnect to the remote application.  This will occur until the endpoint in the live application was also destroyed which means that you would have to execute a loop on creating calling until she succeeded.  In 2011, we changed the behavior so the call to create the newly restarted application would cause the remote application to start return errors, but now we are still trying to establish the connection on the newly restarted application for up to the timeout limit.  If you use a state similar to the above machine, you should be able to reconnect without having to write a loop around the call to Create in the newly restarted application.

• How to fix the error message: xerces.dll is missing

  You try to view a dvd, but when I go to play the dvd, I get an error message: xerces.dll is missing.  How can I solve this problem?

  Hello

  1. what operating system do you use?
  2 are there any changes or updates made on the computer?
  3. are you able to read the DVD by cancelling the error message?
  4 is the issue limited only when you try to play the DVD?

  Try to play the DVD on another computer and check.

  Xerces.dll error message can be caused by corruption in the Windows System.

  Check out the link to use the System File Checker (SFC) tool to troubleshoot missing or corrupted system files in Windows 7.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should usually be your first troubleshooting step.
  http://support.Microsoft.com/kb/929833