How to delete a multiple exposures (same frame) light stand?

Similar Questions

• How to incorporate a multiple SQLQueries [same DataSource] in the single report

  Hi all
  
  I want to create a report as it shows two blocks for a single client - a say "* EMPLOYEE_DETAILS *" and "* EMPLOYEE_MANAGER_DETAILS." Each block retrieves the data using two different sql queries [each of the query is already so complicated that they can't be connected.]. The two blocks have EMPLOYEE_ID as common field. Now I want to burst the report [using the API BI] so that each report generated after the burst contains two blocks for each employe_id. Otherwise, I want to burst ON EMPLOYEE_ID. The confusion that I get is "select" statement in xml control tool takes only EMPLOYEE_ID and the entire block path so if I give EMPLOYEE_DETAILS/employe_id, it will blow up for only the first block and if I give EMPLOYEE_MANAGER_DETAILS/employe_id, it will burst for the second block. If I want to burst on two different blocks.
  
  Is there a possible solution for this kind of problems, or should I change my approach? Please help how to for scenarios of suh using the BEEP API.
  
  Thank you very much!

  For reasons of performances bursting prunes the document. Try this below.

  /EMPLOYEE_DETAILS | /EMPLOYEE_MANAGER_DETAILS 
  

  or

  managers

  /EMPLOYEE_DETAILS[EMPLOYEE_ID=/EMPLOYEE_MANAGER_DETAILS/EMPLOYEE_ID] | /EMPLOYEE_MANAGER_DETAILS[EMPLOYEE_ID=/EMPLOYEE_DETAILS/EMPLOYEE_ID]
  

  Note: You must be careful when you go deeper in the tree. For example, your xpath query previous code would be ONLY some children of EMPLOYEE_ID. I guess that there are no nodes under employee_id

  You may want to look at this post by tim d. http://blogs.oracle.com/xmlpublisher/2008/07/multiple_datasources_i.html with a little work, you should be able to build a result set. In the example of tim he uses dept, you who would rise to employe_id. Your breaking control file would be much simpler... I would use this option

  
  
    - Defines a single parameter for the Department Number - with default of 20:
     
   
   
    
     
    
    -
  Defines name - and link to DEPTNO in Q1
     
       file:///d:/dttest/employee.xml -
  Defines url for xml data
     
    -
    - The following section specifies the
  XML hierarchy for the returning data:
   
    
  - This creates a summary total at the department level based
  - on the salaries at the employee level for each department:
    
    
    
     
     
     
     
     
     
    
   
   
  
  

  Don't forget to give me points!

  IKE Wiggins
  http://bipublisher.blogspot.com

• How to delete multiple addresses?

  How to delete multiple messages at once?

  Have you ever deleted multiple files in both Solution Explorer?
  Thunderbird works the same way.

  Select the first message you want to delete. Press on and hold down SHIFT and select the last message should be deleted. This selects all messages between the first and the last of them.
  The Ctrl key and click on a message, you can select or deselect them individually.
  Then press DELETE to remove all the selected messages.

• How can I recover multiple deleted items, I have not deleted the permenantly?

  How can I recover multiple deleted items, I have not deleted the permenantly?

  Hello

  Have you looked in the trash?

  Recover files from the Recycle Bin - Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-files-from-the-Recycle-Bin

  Recover files from the Recycle Bin - Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/recover-files-from-the-Recycle-Bin

  How to restore previous Versions of a file and the folder of Vista (Ultimate, Business and Enterprise)
  http://www.Vistax64.com/tutorials/122127-previous-versions-shadow-copy.html

  How to restore files and folders in Windows 7 with previous Versions
  http://www.SevenForums.com/tutorials/85679-previous-versions-restore-files-folders.html

  ----------------------------------------------------------------------------------------------------------------------------

  This could help you recover a file, or a previous version (all versions of Vista and Windows 7).
  http://www.ShadowExplorer.com/

  ShadowExplorer - recover lost files and folders (Vista and Windows 7)
  http://www.SevenForums.com/tutorials/132087-ShadowExplorer-recover-lost-files-folders.html

  ----------------------------------------------------------------------------------------------------------------------------

  Recuva - free - recovers files deleted from your Windows computer, Recycle Bin,
  map of the camera digital or MP3 player. And it's free!
  http://www.Piriform.com/Recuva

  Recuva - Forums - help here
  http://Forum.Piriform.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I have multiple images in one frame in movie maker?

  Hello

  I would like to know how I can include multiple images in one frame in movie maker?

  Thank you.

  It would be useful to know exactly what you want to create.

  You can prepare the images in an image editing program
  before you import into Movie Maker.

  Picasa free software can make collages:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Picasa
  http://Picasa.Google.com/
  (for Windows XP/Vista/7)

  Tutorial Picasa: Collages: creating a montage
  http://Picasa.Google.com/support/bin/answer.py?hl=en&answer=19539
  (Photo battery option would be worth)

• How can you affect multiple windows open at the same time

  How can you affect multiple windows open at the same time

  You can not.  Only a calendar can have several windows.

• How to delete or remove a copy of the same book?

  How to delete or remove a copy of the same book?

  Answer the quest for peace.

• How do you create a flash in-game popup on the same frame?

  How do you create a flash in-game popup on the same frame?
  I need to make a popup in flash on the same chassis. Basiclly as you reach the framework and randomly (I know how to do things at random) a popup can appear saying that you got a price; and I want that things in the back remains the same.
  Please help me!
  Thankx in advance.

  Code is placed in the timeline in the framework where you intend it to be.

  You have not given enough information to be able to help with your problem of var timer.  Try to reason it yourself well.

• How can I select multiple messages at the same time for archiving

  I want to archive multiple messages in a folder from archive. How can I select multiple messages at once?

  To select a block of eg: 10 emails.

  • Click on the first email
  • Hold down the SHIFT key and click the last email.
  • This will highlight all in the interval

  To hightlight all the emails in a folder.

  • Click on the first email to focus.
  • Press on and hold down the 'Ctrl' key and press 'A '.
  • This will highlight all emails.

  To select several emails:

  • Press and hold down the 'Ctrl' key and then use the mouse to select multiple e-mails
  • they will appear as "conversations in the messages pane.
  • Click on archives.

  Info on setting up your archive' Options ': '.

  • https://support.Mozilla.org/en-us/KB/archived-messages?ESAB=a & s = Archive & r = 0 & s = ACE

• Please explain how to delete a computer IMAC?

  Please explain how to delete documents and files from my office? Why simple Apple does not offer an option to delete above under edit. This totally baffles me? How much easier would it be? I'm not tech savvy so I end up saving multiple copies of the same thing. Please help me, my inability to delete anything on this computer either this Apple drives me crazy and I can't face is no longer with this computer.

  Select them and press the command and DELETE keys, then choose Empty trash from the Finder menu. The menu option to remove is on the file menu.

  (145043)

• How can I remove multiple backups of my Time Machine drive

  My time machine drive has reached the point where you have to delete an old backup before it completes a new backup.  Is it possible to delete several backups (e.g. all 2014 and 2015 ups 25%) since the Time Machine disk at the same time?  I know how to delete a backup but want to delete several at once.

  By removing the old back ups, remove the first one made or that it has the basic material on which TM all backups are built?

  MacBook Pro 2011

  El Capitan

  16 G RAM

  1 TB SSD drive.

  Time Machine drive is 2 TB.

  Thank you

  I came across exactly the same problem earlier this year. The best answer I found was here: thegreyblog.blogspot.com/2014/03/shrink-your-time-machine-backups-and.html in short, Time Machine, always create a full backup, not an incremental backup. So, no, you don't cause damage by removing one. I did it without adverse consequences. Second, use the tmutil command to delete old backups. sudo tumtil gives you the full list. I wrote a bash command line script, as the author points out. I deleted everything I had since last year, from the first backup performed in October, with:

  $ sudo tmutil listbackups

  Password:

  / Volumes/Seagate backup more Drive/Backups.backupdb/mkauffmanmbp/2016-01-01-003303

  / Volumes/Seagate backup more Drive/Backups.backupdb/mkauffmanmbp/2016-01-02-005714

  There was a lot more lines, what we are after here is the location to be used in the next line. In my case it has/Volumes/Seagate Backup more Drive/Backups.backupdb/mkauffmanmbp/ you need do the same thing, use it-before all the spaces in the path as shown below. Below, I've used 2015-1 * because the mine began in October 2015. I have therefore of 2015-10, 11 and 12. If you want to get rid of all 2015 you can use 2015-*. If you want to get rid of everything before October, you can use 2015-0 * which would remove 01,02,03,... 09 to 2015.

  $ sudo tmutil disable local

  (Here a line.)

  $ for i in/Volumes/Seagate\ Plus\ Backup\ Drive/Backups.backupdb/mkauffmanmbp/2015-1*; tmutil delete "$i"; fact

  $ sudo tmutil activate local

  I hope this helps!

  Happy new year!

• How do delet several columns in the 2D table 0

  Dear Sir.

  Please tell me how delet 0 multiple column besuace zero of one by a column of delet take too much time. Here, I have attached the program with this message and the main file.

  

  Julian_prince wrote:

  Please tell me how delet 0 multiple column besuace zero of one by a column of delet take too much time. Here, I have attached the program with this message and the main file.

  How big are your real matrices? How do you measure the speed? How fast is now and how fast should it be?

  In all cases, you can do it with a single loop, for example as an attachment.

• DISABLE multiple exposures

  just bought a 6 d. shooting multiple exposures, and then disabled it push normal, but the functionality was not disabled. He is still shooting Multipe exhibitions. feel trapped. Help. How to get out or is it a defect of the camera?

  Thanks for any help

  Tom

  Are you talking about the mode of multiple exposure which mixes the pictures at camera, exposure bracketing together where it takes 3-7 pictures consecutively, at different exposures, but leaves the separate files?

  If the latter, I had similar problems before when I tried to put it into power and came out of it, without being totally it power (user error).  I don't have my camera in front of me, but I was using or not the ' set' button to confirm the setting, or I was, and you don't have to.  I don't remember which, but it's simple enough to go back and confirm.

  If the first case, I can't say, I have never used this feature.  The menu says "turn off"?  If he is really stuck, then you should try a factory reset.

• How to delete photos in "My pictures" without duplication on them and more.

  My photos

  How to delete photos in "My pictures", without reproducing again and again... as hundreds of each photo?

  Unwanted copies have file names with
  copy "prefix of"?

  Example: Copy of IMG_1455.JPG

  If_yes_maybe the following tutorial, I wrote
  for XP offers a few ideas:

  Here's how to reproduce the unwanted
  copy of...

  Hold down your CTRL key and select multiple files...

  Place your pointer over the selected group
  (holding the key ctrl) and left click / drag
  the group even just the slightest bit... now
  release the mouse button.

  Oooops... multiple copies...

  Maybe the following will help:

  Sometimes most of the person who
  trying to select multiple by holding the CTRL
  or the SHIFT key down while clicking on the left to select the
  image files.

  Copies are created when you are unable to
  completely release the mouse button before
  you move the pointer to another file. When a group
  the selected file is dragged... even the slightest
  release the mouse button will produce a bit...
  copies of all the files previously highlighted.

  It's a little easier if you have your folder
  Options set at single click... that way you can
  select/deselect a file with just a mouse more
  and you don't have to click. For multiples you
  I have to keep... CTRL or Shift.

  Do not click on... no slip... no copy... maybe that of
  your solution. To adjust the click...
  Open a folder and go... Tools / folder
  Options / General tab... Check... 'single click '.
  To open an item"/ apply / OK.

  If you want to delete all the files in a folder
  You can try the following:

  Reach... Edition / select all... or type... CTRL / has...

  With all of the files selected... go... Drop / delete...
  or press your delete key... or... click on the
  Group and choose 'delete '.

  How do I find and remove unwanted 'copies '.
  of your image files.

  Open the folder that the images are saved in and
  on the left, click on the button 'Search' in your toolbar.

  (If you view the files from a montage
  program and do not know where the record is... right
  Click on one of the image files and the menu...
  choose... Properties. The path to the folder will be
  in the tab 'General' to 'Place').

  In the research pane select... "All files and folders".

  In the "All or part of the file name" field. Come in...

  a copy of

  Now... on the left, click on the search"" button.

  When the search is complete... go to... Edition / select all...

  Then go to... Remove / delete.

  You will see a dialog box asking if you are sure
  you want to delete the files, click Yes.

  Now... on the left, click on the 'Back' button in your toolbar.

  Now the remaining files should be your originals.

  If you delete the wrong files... recover from
  your basket now.

  Also see the following article:

  Trouble fixing: stop Windows copy
  Files accidentally when Ctrl-click selecting
  http://www.howtogeek.com/HOWTO/Windows-Vista/fixing-annoyances-stop-Windows-from-copying-files-accidentally-when-CTRL-click-selecting/

• How it delete and start from scratch?

  All I want to do is clear on my computer and restart from scratch. I have all my records, but he said not how to this in the instruction manuals... only includes restoration at some point and I don't want to restore. How it delete and start from scratch? I've saved my files to an external hard drive.

  If you are sure you want to do this - and it of a radical step, is generally not necessary - you potentially have two choices.

  In addition to your data, make sure that you have saved the downloaded installation files and their activation keys, as appropriate.

  Some computers manufactured by large OEMs have a hidden partition to "restore" that will allow you to restore the computer to its "fresh from the factory" State.  Alternatively, the manufacturer may have provided a 'recovery' or 'restore' CD/DVD which will accomplish the same thing.  One of the important side effects: test facilities of things like antivirus applications will install but not triggered because the trial period had been used.  You must uninstall these completely (using the "removal tool" provided by a / v manufacturer) before installing a real a / v application.

  On the other hand, you can have a genuine Windows XP install CD, although these are rare.  If that's what you have, you want to do what is called a "clean install".  Don't forget to install your device drivers after the Windows Installer is finished (card mother/chipset, network card, sound card, video card, etc.).

  http://michaelstevenstech.com/cleanxpinstall.html
  http://www.theeldergeek.com/xp_pro_install_-_graphic.htm

  In both cases, after Windows has been installed, the first thing we do is go to Windows Update and install all critical updates.  Then you can install all the applications you have installed after you purchased the computer.  They must be installed from the original media (a downloaded Setup program that you have registered or a CD/DVD).  If none of these applications are Microsoft applications, return to Microsoft Update and get updates critical for these applications.