How to detect the notches in V which

Similar Questions

• How to detect the sign of a number?

  I output which gives the number of negative or positive. My problem is how to detect the sign of the Boolean number and output? For example if the input number is negative as - 23.11 I want to output the value false and if the number is positive as 17.99 I want to output true.

  T H A N K S!

  Test if the number is greater than or equal zero.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• How to detect the key ALT pressed in os7

  Hai,

  How to detect the key ALT pressed in Os7...

  Can I use the source for os 7 as below? ,

  protected boolean keyStatus (int keycode final, time final int) {}

  If (Keypad.key (keycode) == Keypad.KEY_ALT) {}

  ...

  Returns true;

  } else

  Return super.keyStatus (keycode, time);

  }

  and also I want to know which is the return of this method? In detail
  How to detect the other touches also?
  What are the updations or changes in the code, on os6 os7?

  KeyCode is a bit model, if you use "is" to compare you won't get accurate results, you should use the operator '& '.

  See
  http://supportforums.BlackBerry.com/T5/Java-development/detect-ALT-and-shift-key-clicks/Ta-p/444976

• How to detect the number of created quickobjects

  How to detect the number of quickobjects created? quickobject are quickbox2d.

  Basically, I have a timer that will countdown to 4 seconds and it will create a falling ball, it will get removed when she falls down. However, I want only there so that if more than 5 bullets are in step, it will cease to create until it is less than 5 to start creating some balls again. Is there a way I can do?

  It's the timer to create the ball

  If (! _ballCreation_timer) {}

  _ballCreation_timer = new timer (4000);

  _ballCreation_timer.addEventListener (TimerEvent.TIMER, _onBallCreationTimer);

  }

  _ballCreation_timer. Start();

  Function which create the ball based on clock

  function _onBallCreationTimer (e:TimerEvent): void {}

  _doCreateNewBall();

  }

  function _doCreateNewBall() {}

  _ball_quickobject = sim.addCircle ({x: PHYSICS_SCALE * (960), y: PHYSICS_SCALE * (10), RADIUS: 0.5, draggable: false});

  MAKE A LIST OF BALLS

  _balls_array.push (_ball_quickobject);

  }

  This is the part where if the table (QuickObject) ball falls down and are destroyed

  addEventListener (Event.ENTER_FRAME, _onEnterFrame);

  DRAW EACH BALL FALLING OUT OF THE SCREEN

  function _onEnterFrame (aEvent: Event): void {}

  for each (var quickObject: QuickObject in _balls_array) {}

  BALL FALLING OUT OF THE SCREEN?

  If (quickObject.y / PHYSICS_SCALE > 1080) {}

  _doHandleBallOffScreen (quickObject);

  }

  }

  }

  DESTROY THE BALL FALL OFF THE SCREEN IF

  function _doHandleBallOffScreen (aQuickObject: QuickObject): void {}

  DESTROY THE OBJECT

  aQuickObject.destroy ();

  REMOVE FROM THE CUSTOM TABLE

  _balls_array.splice (_balls_array.indexOf (aQuickObject), 1);

  }

  check the length of _balls_array.  If it is greater than 5, do not create another bullet:

  If (! _ballCreation_timer) {}

  _ballCreation_timer = new timer (4000);

  _ballCreation_timer.addEventListener (IMER TimerEvent.T, _onBallCreationTimer);

  }

  _ballCreation_timer. Start();

  Function which create the ball based on clock

  function _onBallCreationTimer (e:TimerEvent): void {}

  _doCreateNewBall();

  }

  function _doCreateNewBall() {}

  If (_balls_array.length<>

  _ball_quickobject = sim.addCircle ({x: PHYSICS_SCALE * (960), y: PHYSICS_SCALE * (10), RADIUS: 0.5, draggable: false});

  MAKE A LIST OF BALLS

  _balls_array.push (_ball_quickobject);

  }

  }

  This is the part where if the table (QuickObject) ball falls down and are destroyed

  addEventListener (Event.ENTER_FRAME, _onEnterFrame);

  DRAW EACH BALL FALLING OUT OF THE SCREEN

  function _onEnterFrame (aEvent: Event): void {}

  for each (var quickObject: QuickObject in _balls_array) {}

  BALL FALLING OUT OF THE SCREEN?

  If (quickObject.y / PHYSICS_SCALE > 1080) {}

  _doHandleBallOffScreen (quickObject);

  }

  }

  }

  DESTROY THE BALL FALL OFF THE SCREEN IF

  function _doHandleBallOffScreen (aQuickObject: QuickObject): void {}

  DESTROY THE OBJECT

  aQuickObject.destroy ();

  REMOVE FROM THE CUSTOM TABLE

  _balls_array.splice (_balls_array.indexOf (aQuickObject), 1);

  }

• How to detect the color pages in a PDF file?

  I use a plug-in of Acrobat C++ read/modify a PDF file.

  I need to get the total number of pages in the PDF file and the page numbers of the pages in color.

  So far, I was able to get the total number of pages using PDDocGetNumPages() with no problems.

  However, I can't find an API that lets me know if a particular page is color or not. Is there a way to do this?

  Thanks in advance!

  But what happens if there are RGB data which means black or grey (R == G == B), that means black or RGB?

  There is a code sample in the SDK to browse content in the PDF file, and then you can get the color space and color of each object.

  But you really need to do background research on the colors & spaces to achieve this properly.

  From: Sachintha81 [email protected]<>[email protected]>

  Reply-To: "[email protected]<>[email protected]> ' [email protected]<>[email protected]>" "

  Date: Wednesday, February 8, 2012 16:57:10-0800

  To: Leonard Rosenthol [email protected]<>[email protected]>

  Topic: How to detect the color pages in a PDF file?

  Re: How to detect the color pages in a PDF file?

  created by Sachintha81http://forums.adobe.com/people/Sachintha81> in Acrobat SDK - see the discussion complete onhttp://forums.adobe.com/message/4194889#4194889

• How to detect the window closing event and to do some tasks before leaving

  Hello

  Someone knows how to detect the window closing event and to do some tasks before leaving?

  Sridhar

  Structure of the event allows to detect the window closing event. In the structure of the event,.

  Select this VI-> close round table for this task. See attached picture.

• How to detect the operating system to PDF using javascript

  Hello

  How to detect the operating system to PDF using javascript. (Javascript console)

  Thanks in advance.

  App.Platform will return "WIN", "MAC" or "UNIX".

• How to detect the movement of components in PaneView event?

  Hi, there! ~

  At first please let me explain what is my development environment, I am develping apps based on BlackBerry JRE 6.0.0 by Eclipse and I'm debugging my apps on Simulator (BlackBerry 9800, 6.0.0.706) and peripheral (BlackBerry 9900, 7.1.0.912)

  I'm starting a new application which is a multifunction, during the wake I want to use a new layout UI for me, I've already imported from the code named "PaneManagerDemo" example and I built a framework in my application, I initialized TitleView as HorizontalScrollableTitleView and add titles and content.

  I also used a UI component custom named "ListStyleButtonField" come from the official web site of blackberry, once all the ListStyleButtonField of accumulated height exceeds the height of the content field, which cause the ListStyleButtonField lost her concentration and I do not know the focus was left to the last content topic whose screen slipped to finally make the time.

  My question is is it possible to detect the components slide event, I'll focus on the ListStyleButtonField what is the top of the content if I can control this event, please help me to solve this problem, thank you! ~

  I already find the method to detect the movement of the pane in PaneViewManager event, by according to this thread How to handle events of TouchGesture

• How to detect the approve/reject button in the form

  Hi, I created a process and after the kickoff of the process, affected user can approve/reject the form in the workspace. Can I detect which button is pressed in the form and perform a different validation before the form is sent to the server?

  For example, the form had to field & field B, if you press the button approve, to field will be a field of manadated and if rejection touches, field B will be a field of manadated. As in my form, I only got a "submit" button and the approve/reject button is generated from the workspace, so I do not know how to detect which button is pressed in the form? Thank you.

  There is no need to put the approve/reject buttons on the form. Simply areas of process.

  Next post might be useful: http://forums.adobe.com/message/1356826#1356826.

  Jasmine

• How to detect the resource (find) information?

  Hi all

  I'm trying to detect programmatically information resource name for devices HSDIO PXI and PXI-4130.   How can I do?    System DAQmx property does not include these devices, and I can't find a way to convert a resource VISA name in name of resource HSDIO or NI DC PS formats.  I enclose a code snippet that detects resource VISA for a device 6552 name, but I can't seem to figure out how to get the name of MAX the device resource.   Both the niHsdio and the properties of 'name of the resource' OR DcPS requires that you spend a session valid in them need valid resource name andI to make...

  And no, asking the operator to launch of MAX and find the name of the resource is not an option

  Thank you

  Hello

  Modular instruments and devices devices use their own set of screws to find devices in the system. The lybrary called NOR-ModInst and i's includedin the palette of the utility with the MID drivers.

  Here is a small example that demonstrates the use of their base.

  Let me know there are questions of the amy

  Kind regards

  JC

• How to detect the number of channels on an oscilloscope?

  I have various models sitting around the laboratory, some two-channel, a few four-channel oscilloscope.  I would like for my program to be able to detect the number of channels is available.

  I can just tell my program how much string is available based on the model number, but is there a VISA command to request scope directly what channels he has?  I would also be able to ask what, if any, ability to function math there.

  "all drivers of the oscilloscope must return the instrumentID after initialization, and that should be enough to know the number of channels.

  What Albert was referring to is that all compatible drivers IVI in their base class interface have an attribute/property that indicates how many channels has the scope.

  If you don't want to use the driver of the IVI for the scope then maybe download some of the drivers and check the source code to see how they calculate this dynamic repeated capablity.

• How to detect the cFP-1804

  Hello

  I have a cFP1804 connected to a cFP2120 via EThernet.  The cFP1804 has a thermocouple installed package that is read once per second the 2120 by using the 'FP Read.vi"(see file attachment). When systems are interconnected, the correct values of returns «FP read» When disconnecting from the cFP1804, "PS read" still will continue to serve the received values but triggers error 33800 until the connection has been restored. So far so good.

  The problem I have happens when you reset the cFP2120 while the cFP1804 is offline. At that time a single "FP read.vi' will cause the program running on the cFP2120 to stall completely.

  No idea how to get around this problem?

  I'm using Labview 8.2.1 with RT version 5.0.1

  Thank you

  V

  Hi Volker,

  You can detect the RT and network objectives using the replication VI system. An explanation can be found in NI Developer Zone tutorial: replication of system of target in real time at http://zone.ni.com/devzone/cda/tut/p/id/3937. The download link is at the bottom of the page. Be sure to read the included Readme for installation instructions. If you run the VI find all targets, you will be able to test if the cFP-1804 is on the network.

• How to detect the stop scrolling

  Hi all

  I am currently working with the Bold and Storm, JDE 4.6.0 and JDE 4.7.0 respectively. I have the following question: How can I detect when the user stop scrolling? I have set up a ScrollChangeListener.scrollChanged () that detects when the user begins to scroll through the screen. At the moment, I put a Boolean variable in the true, but now I need to put the same variable to false when the user stops scrolling and I don't know how to do it. Any idea?

  Is there another listener or event that it would be useful for detecting the start and stop scrolling or the movement on my screen?

  Thanks in advance for your reply,

  Gabriela.

  Try to implement a TimerTask with Timer class to check the status of scroll each time.

• How to detect the application is closed

  Hello

  I would like to ask how to detect closing the application? I would like to add an action (for example, backup settings and etc.) when a user closes the application. Thank you

  In the Cascades you usually want to hang a slot for the aboutToQuit() signal.

  Documentation here should lead you to everything you need to know: https://developer.blackberry.com/cascades/reference/bb__cascades__application.html#setautoexit