How to differentiate the window system is using

Similar Questions

• I'm runing windows vista and windows7 on my computer, how to erase the operating system I use not

  I want to erase widows vista

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/removing-Vista-from-dual-boot-with-Windows-7/3ffdd1f5-215F-4003-B354-5e03d1ef7a7a

  It will be useful.

• How do you remove Trojan horse from the Windows\system\svchost.exe file located?

  How do you remove Trojan horse from the Windows\system\svchost.exe file located? I worked on this problem for 5 days. I've tried everything except wipe the hard drive completely and starting over. Windows xp pro sp3

  I bought a new diagnosis program and quarantined the virus once it has been identified. I tried to remove the virus in several ways, but it comes back. The best way that I thought would work enter safe mode and by changing the attributes of the svchost.exe file and then delete and checked the registry AWI hwo to the Web site, but it continues to be problematic.

  Hello

  During the uninstallation of antivirus/antispyware/security programs always check for an uninstall
  tool and/or removal instructions special to avoid leftovers.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146
  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y<-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 8, 32-bit: how to cancel the file history and use the USB for the sole purpose Ready Boost

  By mistake, I clicked file history on. The USB key used for ready boost is selected and that the disk is write protected. Windows 8, 32-bit: how to cancel the file history and use the USB for the sole purpose Ready Boost. I don't have an another USB suitable for ready boost.

  Hello

  You should be able to disable the history of files by using the local Group Policy Editor.  Consult this publication of the article.  Use the #2 option.

• How to get a handle to the window to screen using just group id and the id of the window?

  Hello

  We are trying to develop a video application, and we use ForeignWindowControl to display the video on the screen.

  We have those ForeignWindowControl declared and defined in a QML file that appears as needed.

  Using the CameraAPI, we are able to get local video displayed correctly on the local video ForiegnWindowControl. For this we have just the window group id and the id of the window api camera and it automatically configures the window newly created by the camera to the position API and the size defined in the QML file.

  However, this is isn't the case with the video remotely. Since there is no method/function similar to the createViewFinder of the camera api, we need to create a new window of ourselves that goes under the Group shared by the ForeignWindowControl remotely, using screen_create_window_type and set all the required parameters.

  To view the video, hard-code manually the position and size of the newly created window so that it corresponds to the position and the size of ForeignWindowControl remote in QML file and is displayed correctly.

  My question is how to find the ForeignWindowControl using just the group id and the id of the window? the way in which the cameraAPi done in-house?

  Any help would be appreciated.

  Thank you.

  There are 3 ways to associate a window with a ForeignWindowControl.

  1 tell the ForeignWindowControl to expect a window with a given windowId.  Then after that libscreen allows you to create your window with the same windowId, use screen_join_window_group() to adhere to the same group that uses the FWC.  The FWC should automatically capture this event and associate the window itself.  This is how the camera it.

  2. call the bindToWindow() of the ForeignWindowControl method to associate the FWC a particular windowId/groupId.  Similar to the #1, but doesn't seem more useful if you create the FWC after the window of the screen has been created.

  3. call the setWindowHandle() of the ForeignWindowControl method.  Similar to the #2, but instead of using windowId/groupId, you spend just the actual handle.

  See the FWC docs:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__foreignwindowcontrol.html

  If you have created the window, you can use one of the 3 approaches.  If the window has been created in a different process (eg. mm-engine rendering, or photo-service device), then generally #1 is the approach you would use.

  See you soon,.

  Sean

• How to decompress the files downloaded for use with Windows 7?

  How to decompress the files downloaded for use with Windows 7.  Specifically, zip files are a Magellan GPS unit.

  There are instructions at: http://windows.microsoft.com/en-us/windows7/compress-and-uncompress-files-zip-files

• How to detect the operating system to PDF using javascript

  Hello

  How to detect the operating system to PDF using javascript. (Javascript console)

  Thanks in advance.

  App.Platform will return "WIN", "MAC" or "UNIX".

• G72-B60US: how to fix the Windows 7 startup problem if HP has never provided a disk to reinstall Windows?

  Recently, my HP G72-B60US, is unable to boot. The window manager start Windows displays "unable to start Windows. To solve the problem:

  1. Insert your Windows installation disc, and then restart your computer

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  If you do not have this disk, contact the manufacturer or computer of your system administor.

  File: \Boot\BCD

  Status: 8xc000000f

  Info: an error occurred trying to read data from the boot record. »

  Because the laoptop was out of warranty and the computer is unable to boot, I'm unable to create a recovery disk. I have two questions.

  1. is it possible to download a free relocation to the Windows 7 home page to start my computer?

  2. When do reinstalling the operating system, I have to wipe back all in this situation? If not, how to reset the operating system without wipping on all data?

  Thank you for your response.

  I solved the problem using the F11 key. The correct procedure for the relocation of the OP suggests, first try the F11 key. Moreover, the Dell PC Restore appears F8 key. The user should remember the key to the recovery of the PC.

• does anyone know how to fix the window with error code 80080005 updates

  can someone tell me where to go to get what I need to fix it is error 80080005

  Windows operating system?

  Windows XP perhaps-

  You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download the updates on the Microsoft Windows Update Web site or the Microsoft Update Web site
  http://support.Microsoft.com/kb/910337
  Windows could not start the service on the local computer's Background Intelligent Transfer. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular-2147467243 error code. (0 x 80080005)
  error message is similar to the error message "error 5: access is denied." To resolve this problem, follow the steps described in the section "error 5: access is denied."

  This error indicates that access for FOREST permissions have been modified. To repair these access permissions, use one of the following methods, depending on the operating system.

  Windows XP

  1. Click Start, click run, type cmd, and then clickOK.
  2. Type the following command and press ENTER:
     SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  3. Click Start, click run, type services.msc and clickOK.
  4. Double-click on Background Intelligent Transfer Service.
  5. On the general tab, click Start.

  Or Maybe Vista:

  0 x 80080005 implies that Microsoft Installer is not configured correctly or it may have malfunctioned.

  Run the Startup Repair tool by using the Windows Vista installation disc

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  How to fix Windows Vista using Startup Repair automatically
  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Startup Repair frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Maybe Windows 7 .
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How to download the windows aero & know if my computer is compatible?

  How to download the windows aero & know if my computer is compatible?

  Hello

  You do not download Aero; It is part of Vista, with the exception of Vista Basic.

  Windows Aero

  Windows Aero is the experience of office available for PCs using a compatible graphics card and running editions Home Premium, Business, Ultimate, or Windows Vista Enterprise. Windows Aero offers a user experience that makes it easier to visualize and work with your information, and it provides a smoother, more stable desktop experience.

  You must have the graphic material correct, consistent as explained above and below to use Aero.

  Here are the system requirements for Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  See you soon.

• Why and how to activate the windows Defender?

  Defender goes in a loop when I try to open and then times out. Did not find how to activate the manuallt. Am unable to see Tools option

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

      

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How to check the Windows key is original and unique user only

  Hello

  If I will buy another retailer windows operating system. so, how to check the windows key is original or not?

  How to check the windows key is single user or three key user? How to learn about the windows key?

  Hello

  Find the key data is any tool?

  In my State, one of the retailer sold out of the window in two different users. the key is the same. But I did not how many users should be used the key to this series?

  That's why i, m here asking you friends

  Then you have been sold an illegal license key, as a license key is never sold on its own, more a license key is never awarded to two different clients.

• Can someone tell me how to upgrade the operating system on the MacPro?

  I have a MacPro1.1 which works fine, but now I can't use LightroomCC on that because the OS is no longer supported. Can someone tell me how to upgrade the operating system on the MacPro?

  Your Mac Pro 2006 supports only as high as Lion unless you use a hack.

  If you want Lion then order a code to download here:

  http://store.Apple.com/us/product/D6106Z/A/OS-x-lion

  and then use the code in the Mac App Store.

  If you need higher that the Lion then Google for the hack

• How to load the operating system of split hard drive D of Aspire5315?

  OS in my laptop does not work correctly. Standard recovery system does not work - no food no points.

  How to load the operating system of split hard drive D of Aspire5315? -step by step please.

  Please consult this useful link: http://acer.custhelp.com/app/answers/detail/a_id/2631/

• How to find the right server to use windowsmail to send and receive e-mails?

  How to find the right server to use windowsmail to send and receive e-mails?

  Who is your current e-mail server? (Which is after the @ in your address).
   
  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish