How to disable the laptop computer touchpad

Similar Questions

• How to disable the laptop network WiFi & allow cable TV

  I have my desktop computer connected using cable for my internet & I have a laptop that I was using WiFi for my internet, how do I change my laptop wi fi to cable so I can go online on my laptop, as well as on my desktop, thanks

  Hello

  You do not have to manually disable you the WiFi, all you have to do is to run an ethernet cable from your router/access point and connect to your ethernet port on the laptop.

  As soon as an ethernet cable is plugged into a computer/laptop, Wifi is disabled automatically, it's the industry standard ethernet tends to provide more transmision of data reliable and stronger than wireless signals.

  However if you use a Modem and not a gateway/router then you can buy a new router, or ask your ISP to upgrade your Moderm to a gateway.

  If you want to keep it cost effective and minimal cost, you could also try doing an Internet connection sharing, providing that your computer has an additional network card, or you could buy a new network adapter and snap it to your computer because the laptop is internet sharing off of your computer in this configuration, you may experience a slow connection.

• How to disable the stolen computer program?

  Our InDesign program has been enabled on a computer that was stolen.  How to disable so it can be activated on another computer, we have?

  If it is a subscription, change your Adobe ID immediately. Now activate it on two computers. That deprives the other computer to this one.

  If it is a purchase, it is not so simple, maybe, they have stolen your right to use the software. Contact Adobe to see if they are ready to release him. Since they cannot block the stolen copy, they give you that here, indeed. It would be one of your insurers.

• How to disable the touchpad on an Acer computer?

  Original title: Touchpad

  Hello

  Can someone please help me and tell me how to disable the touchpad for Acer computer. I did once before, but I forgot.

  Thank you

  Jose

  Hey,.

  See here

  See you soon

• I use a mouse in my Windows 7 laptop. How to disable the touchpad pointing device?

  I always use my mouse to my Windows 7 laptop.  I don't want the touchpad pointing device as my fingers touch when writing and everything spoil.  How to disable the touchpad pointing device? Thank you

  What is the brand and model of your laptop? What version of Windows 7?

  Many laptops have a key that will enable/disable the touchpad - mine is on the top row of keys where the function keys.

  You could also open mouse in Control Panel and look for an option here.

  I hope this helps.

• TouchSmart laptop computer: I have HP Touchsmart (15-d020dx). How to disable the touch screen feature?

  I have HP Touchsmart (15-d020dx). How to disable the touch screen feature?

  Hello

  Follow the steps listed in the link below

  http://h30434.www3.HP.com/T5/desktop-audio-video-monitors/how-to-disable-touch-screen/TD-p/569755

• How to disable the touchpad?

  HP Compacq Presario CQ60-615DX laptop Windows 7 32 bit - home -

  1. I would like to know how to disable the touchpad.

  2. my cursor has developed a mind of your own. I start typing and it hops at all where he wants when he wants. Needless to say, I am constantly fix and fix.  For example, while I was typing this--the cursor went as far as the subject line and typing continues between words turn off and touch; This happens online or in Word for example. Other times the movement of the screen where she wants when I type, even if it is not as common. Need help please it makes me crazy! PS - I'm not a sophisticated computer user. Thank you. Ldyjane

  Click on start

  Select, control panel

  Click on hardware and sound

  under devices and printers, you will see the link 'mouse' click on this will open up the mouse properties

  (according to the touchpad on your laptop you can have an exter tab after the Hardware tab click on it and you can disable from there if it isn't...)

  then...)

  Click on the material"tab

  Search, select your mouse (which will be a touchpad etc etc)

  then click on properties

  Click on change settings

  Click on tab "driver".

  Click on disable

  you will receive a message (read it if you want) click Yes

  Click ok

  another message will be apper asking to restart click Yes

• How to disable the touchpad disabled?

  I just got this laptop and it's driving crazy me.

  I tap on the touchpad, and I touched the area where you can disable the touchpad about 1,000 times a day. No matter if I do what he says, I can't that faucet back on.

  I press the windows on my KB.  Type mouse into the search bar.  Tab and then arrow key over to reactivate and it's driving me crazy! I use this for business, but also personal use.

  I see you where you can disable the touchpad, I don't want that.  I want to disable the zone of the touchpad where you tap enable and disable.  It is a defect of design for me.

  Thanks for any help that can be provided.

  Hello stillrivers,

  I see you are having a problem with the touchpad does not disable. Did you by chance a look at the post which explains how to disable the touchpad?

  If you do not have by chance I'll re-post the answer here:

  To do this...

  Go to the control panel.

  ·         Go to mouse properties windows and click on device settings

  ·         Highlight the Synaptic Touchpad and click settings

  ·         In the properties of Synaptic Touchpad Windows on the left and the Panel you will see Touchpad Disable Zone, click it.

  ·         Uncheck the box 'double-tap to activate or disable the Touchpad'

  ·         Click OK

  

  If this does not work by chance, let me know. Also, if you have any questions please ask me.

  THX

• I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer. If yes how can I do this?

  I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer.  If yes how can I do this?

  If Vista is preinstalled on your OLD computer, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  If it is a retail Vista license, read the information on the clean install and then reactivate it:

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• How to disable the touchpad in Dell LAtitude E6420

  I'm desperate to undertsnad how to disable the touchpad on my laptop Latitude E6420.  The F5 key is showing a pictrue of the keyboard, but it is nopt.

  Help much appreciated.

  Best regards. > fine

  Hello

  Welcome to the community

  Enable/disable touchpad press FN + F5. This is the manual of your laptop; http://Dell.to/IBDZRa in the case where you need in the future.

  Kind regards

• Installed by windows error 8 in 2 comp. How to disable the product key/uninstall windows 8 laptop in order to install and use on your PC

  I just bought a new windows 8 CD. It has been stated in the CD that I can use to download/install up to 5 times. So I installed windows 8 to my PC and my laptop. I had matched in the product key to my laptop, after I tried seizes the same product key to my PC, which results in an error whichn I had discovered later that you can only use 1 product key for 1 comp.

  So my dilemma is now I want to use the product key on my PC and not on my laptop. How to disable the product key/uninstall 8 windows in my laptop so I can use the product key on my PC since I use my PC more.

  Also there is a time at which I should activate my windows 8 on my PC? because I'm afraid I'm not able to use it and I will get blocked by microsoft until I can fix this error.

  Please help me on how I can solve this problem.

  Thank you

  Press the Windows key + X

  Click prompt (Admin)

  At the command prompt, type: slmgr.vbs - upk

  Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer.

  On the computer where you want to enable Windows 8, you will need to reactivate by phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• How to disable the touchpad on Probook 4525 s permanently?

  How to disable the touchpad on Probook 4525 s permanently?  Can I uninstall the driver in Control Panel, but the next time, he is back on again once.  I use a usb mouse and touchpad is simply in the way when I type.

  Damy salvation!

  There are a few options depending on your OS and your version of TouchPad.

  • The best option, if it should be available for you is:

  New drivers (at least the V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  Here's a 16.2.X TouchPad driver for the ProBook series - it can run on your laptop:

  sp58647 Synpatics V.16.2.10.12

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  Another method that may work with a driver older if the best option isn't available:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Turn off the TouchPad.

  Close

  Ok

  
  NOTE if this alternative is available, it is very well, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ===================================================================================

  I hope this helps!

• 230 portable x - how to disable the touchpad Windows 8 gestures

  no idea how I can stop the touchpad to launch Windows 8 charms bar when there is a hit on the right side of the touchpad?  In addition, drag from left to right on the left side of the touchpad app switching begins.  It is a pain that working me inside an application (e.g. web browser) using the touchpad I will accidentally move apps frequently.  How I disabled?  I could not find a setting in the ultranav software provided with the laptop.

  In case anyone wants to know, here's how to disable the functionality of Windows 8 landslide:

  You must change the following registry keys to the following:

  Windows Registry Editor Version 5.00
  [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Right Edge sweater]
  "ActionType" = DWORD: 00000000
  [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Left Edge sweater]
  "ActionType" = DWORD: 00000000
  [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Right Edge traction extended area]
  "ActionType" = DWORD: 00000000
  [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Top Edge sweater]
  "ActionType" = DWORD: 00000000

• How to disable the Touchpad buttons click?

  Could someone tell me how to disable the clicking sound when you use the buttons on the touchpad?

  Thank you.

  Hello

  What noise do you mean exactly? It come from the speakers?

  My touchpad buttons don t create sounds coming from the speakers
  There is a single click but its generated by the buttons on the touchpad mechanically and it cannot be disabled.

• How to disable the touchpad in windows 8 - Pavilion g6

  How to disable the touchpad in windows 8 - Pavilion g6

  Welcome to the forum, Sally.

  There are several ways to do this - method you choose may depend on what you need to accomplish.

  Follow a few ideas.

  • A double tap farm in the upper left corner of the touch pad if it off for a single session.

  Enable / disable

  Control Panel > display icon > mouse > Settings of TouchPad > click on "enable TouchPad.

  They continue parameters to install and configure the TouchPad as you like it...

  ==========================================================================

  A method that works with the pilots 'old', it is a failure of session by session...

  Make sure this setting is ON / CHECKED:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Disable the TouchPad during a session.

  Close

  Ok

  
  NOTE that, if it is available on your version, you can select to "turn off the TouchPad" - that's fine, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ======================================================================================

  Next...
  Latest drivers (V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  I hope this helps!