How to display all the items in a ComboBox when it is opened

Similar Questions

• Not sure how to display all the applications that I'm supposed to have with the creative cloud - constant spin in the window? [was: creative cloud]

  Trying to download my creative cloud, but get a constant rotation in the window. Not sure how to display all the applications that I'm supposed to have with the creative cloud?

  Please visit: App does not open. Wheel of progress turn continuously

  I hope this helps.

  Concerning

  Megha Rawat

• How to display all the lines to PRint html option in obiee 11g

  Hello
  
  I am facing a problem in obiee 11g (windows server 2003). I have 2 environments (SIT & dev)
  In dev I'm not confronted with no problem but in SIT when I print the report in html format only lines 1 to 25 are displayed.
  What should I do to display all the lines
  
  Thanks in advance
  Abdul

  Hello

  By default it will like that alone. You must enable PDF/print properties in your analysis
  Just go to edit analysis - result table edit table/pivot table see and
  -Click on properties of PDF print control - select display as "all lines".

  Then save it and run it.

  Thank you

  Deva

• How to print all the files in a folder without having to open each one?

  Hello

  Can someone tell me how to print all the files in a folder? I often need to print multiple files in a folder and it would allow me to save a lot of time!

  Thank you!

  I've done some testing, and it seems that Windows 7 allows print several files when they are all the same type of file.  So, for example, you can select and print 15 Word documents, but not a Word document and a single PDF document.

  To work around this limitation, you can print each file type separately.  For example, to print PDF files in a folder:

  1. Type *. PDF in the search for top-right box.
  2. For 1-15 files, press on CTRL + A to select all the.
  3. For 16 or more files, select 15 of them (click on the first, SHIFT + click the last).
  4. Click any file, and then click print .
  5. Repeat steps 3 and 4 as needed.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• How to display all the photos in the entire catalog tag?

  Hello

  I've been googleling autour, but have not found the right information. I'll try to find all my Tags of all the imported photos photos, but it would show only photos marked a specific folder when I select this specific folder or the timeline, in which I already knew some photos Tags belong in these files.

  My question is how can I search for photos: scored in the entire catalog without going through the timeline or by clicking on each file and subfolder view. I would like to Organizer show all tagged items in all my folders and subfolders at a time.

  Sorry if this has been answered, and I wasn't able to find the information or the right forum.

  Thanks in advance!

  Dreamer

  To search the complete catalog, click on the display button (close to upper-right in the menu Organizer) and choose the thumbnail display order.

• How to display all the other images in the image indicator

  Hi all

  I use IMAQ for capture and record high freq and images high resolution. I have an indicator of image directly from 'Image Grab acquire'. Thus, the indicator image displays images at very high frequency too. To display frames, but not necessarily all alone (enough so that the operator can see what's happening). So, I wonder how I can view, say all the other images (for example all the odd/even number of images), or jump on two and show the third?

  Any help will be appreciated!

  Thank you!

  Wenlong

  Here are some general observations.

  • Image acquisition is "a horse of a different color" - in contrast to many other I/o devices, the memory containing the data (here called the "buffer") is handled by the driver and is not directly available for LabVIEW.
  • I'm guessing that you are using hardware OR video, because you use the IMAQ functions (I used only IMAQdx).  Is this true?  What camera do you use?
  • The (probably) "Awakenings" IMAQ extraction buffer herself to the camera (I say 'probably' because I don't know the hardware you use).  This means that While the loop containing it will work at the rate of the camera images (so you can easily calculate the frame rate, as your example code).

  This looks like a routine NI Demo, so I think that you don't have much experience with the treatment of Vision.  If you have a lot of other LabVIEW experience, you should be able to make the leap to the vision, once you have the idea of the functioning of the buffers.  Unfortunately, there isn't much in the way of tutorials and white papers on Vision than on other subjects of LabVIEW.

  Yes to your question - how to view every Nth frame.  This is the loop key (which arises directly from your code):

  

  As menioned above, this routine is 'clocked' by the function of extraction buffer.  What you do to display each image is th is to place control of the Image inside something like a Case statement that "triggers" each nth time.

  Here is a version of 'Nth' of the loop above (details omitted)-

  

  We always roll the filling of each buffer with a frame loop.  But we then use the whole function divide to select the nth image (those who have a remainder of 0 when i is divided by n-th) and of the 'image' line (it does not really an image) for 'Image' control, with the other case being "Default" (for all the other Valentine go) and nothing inside.  Thus each nth time in this loop, the output of the extraction buffer is the wire to an Image (and displayed), the other N-1 times the thread is going nowhere.

  Bob Schor

• How to display all the data using several parameters?

  Hi all
  I used a query as follows to display the data in a report:
  
  Select col1, col2 / / col1 and col2 are columns of tabale tab1
  of tab1
  where
  tab1.Col1 =
  (case when: P_COL1 IS NOT NULL then / /: P_COL1 IS a USER SETTING to EQUAL COL1)
  : ANOTHER P_COL1 tab1.col1
  end)
  
  AND TAB1. COL3 =
  (case when: P_COL3 IS NOT NULL then / /: P_COL3 IS a USER SETTING to EQUAL COL3)
  : ANOTHER P_COL3 tab1.col3
  end)
  
  The problem is when I run the report with the values of parameters or not, it shows the data that is not null for col1 and col3.
  That is when the value of col1 or col3 is zero the report would not return this record!
  I want the report to show all the data not just the values that is not null.
  How to do this?

  Men,

  ( :p_col1 is null or ( :p_col1 = tab1.col1 ) )
  and
  ( :p_col2 is null or ( :p_col2 = tab1.col2 ) )
  and
  ( :p_col3 is null or ( :p_col3 = tab1.col3 ) )
  
  etc.
  

  Kurz

• Finder - how to display all THE files and folder without exception names in searches?

  I like Mac OS.  I can't WAIT finder.  I just want that he show me everything that matches my search string - files, folders, images, etc.  Each of them, everywhere on my machine.  I just want it to be simple.  Or point me to a good replacement for Finder program.  I waste so much time trying to find things that should take a simple search...  I looked at all the stupid shortcuts like Shift + Cmd + G, which can't find folders in the directory you are in (why would it be separated anyway?).

  Thank you

  CMD-SHIFT-g is quite a search function. It allows you to enter the path of the folder you want to open. What you think "seeks" the current folder is really thin path. If you enter no previous path information, it looks in the current working directory to the folder name you typed in the dialog box.

  You can set the default search starting location in Finder preferences. I have mine for current folder. Looks like you might prefer "search this Mac".

  

  Typing in the search field in the Finder will search the contents and filename. It will offer to search for chips to match types he concludes.

  If you just want to search for files and folders, but no content file, then use cmd-ctrl-shift-f to search by name (you can adjust this shortcut to the system preferences keyboard).

  If you don't get the results of your research, then perhaps your Spotlight index is corrupt.

  Featured: how re-indexing of folders or volumes - Apple Support

  If this does not work for you, try to find any fileor EasyFind

• Does anyone know how to filter all the items in an XMLListCollection?

  I have a tree with the following structure.
  <>node
  < Node1 >
  < node2 >
  < node3 / >
  < node4 / >
  < Noeud5 / >
  < / node2 >
  < / node1 >
  < / node >
  
  I need to be able to filter on node 3, 4 and 5 and then after the filter if they do not exist, get rid of the node 2 level and make then another function to check if the node levels 2 is here and if not filter... then filter node levels 1. Basically it is an ascendant of the filter. Flas 2.0 I would filter base level by removing the knots... then move to the next level and to check if they had children or not... If they did not then I would remove the... and then I would repeat the step for the last level.
  Does anyone know how to do this without having to remove the items from the collection... Basically, perform a filter rather than a deletion. I know that the filter function only returns the first element in the xml structure... which is annoying. If anyone can help me I would appreciate it of course?
  
  Thank you

  I guess that the filtering on a tree passes only in the lymph nodes of the root... It's very lame on part of Flex. Basically, I had to make my own functions to remove the nodes dynamically.
  Remember that this only works on a dynamic array element.
  Delete list ;

  To make this work, I have a main TreeCollection... and that I made a copy. Treecollection.Copy () and deletions of the struct stuff copied. After that the destructions were I made then assigned the copy to the MyTree.dataprovider = copy.

• How to display all the user_source on other servers from a server admin?

  Hello. Thank you for helping.
  
  
  I am not able to view the source for other schemas locally or on remote servers, depending on the user logged in, only for this scheme, or something like that.
  
  
  I use this command to view the source of a procedure:
  
  
  Select the text line
  from user_source
  When type = 'PROCEDURE '.
  and name = "MY_PROC1".
  online ordering;
  
  
  or this:
  
  
  .. .to go sys.user_source...
  
  
  or this:
  
  
  .. .to go sys.user_source@dblink1...
  
  
  Any suggestions are greatly appreciated.

  You can try sth. as

  SELECT line, text
      FROM all_source@remote
     WHERE TYPE = 'PROCEDURE' AND name = 'MY_PROC1'
       AND owner = 'YOUR_USER'
  ORDER BY line;
  

• BlackBerry smartphone how to remove all the data on my blackberry when the buttons do not work?

  I have a Blackberry Curve 8330.  Yesterday the buttons stopped working.  I could use the phone only via Bluetooth.  Based on the information from this forum, I tried a number of hard resets and updated operating system.  None worked.  Verizon is to exchange the phone, but I don't want to send the phone back with all my info on this subject.  Is it possible to erase all the information on the phone without using the keyboard and the normal delete process memory?

  You can make a backup of the device using Desktop Manager > back up everything first.

  Then, you can use JLCmder to reset to factory settings:

  Follow the instructions in this link:

  http://www.BlackBerryForums.com/General-BlackBerry-discussion/18789-Jl_Cmder.html

  At last-

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause the trackball and keyboard problems until this THAT well dry.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• How can I change the tab settings so that when I manually opened a new tab, my home page opens in it?

  Internet Explorer provides the following options to open a new tab:
  "When a new tab is opened, open:
  -A blank Page
  -The new tab Page
  -Your first homepage.

  On Firefox 3.6.10, the only option is the new tab page. If you click on 'Close' an empty page is displayed. There is no option for a new tab, open your homepage.

  In addition, you cannot right click the home button to 'open in a new tab '.

  Y at - it a shortcut for this, and if not, can firefox include this option in the next version?

  Middle or {Ctrl + click} Home button-click to open your home page in a new tab. Or you can add this functionality via an extension.

  New tab homepage extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/777

• How to display all the mp3 files in the SD card in a listview in blackberry?

  I want to display the mp3 files stored in the SD card in a listview in blackberry... How to make. ?

  Thanks for your help... actually I got the answer by changing the file enumeration = fc.list (); enumeration of the file = fc.list ("*.amr", false);

• How to display all the users on the Welcome screen when returning from screen saver

  In win7 when I return from the screen saver, the Welcome screen shows only the last user who was logged on and under that there is a button that says "change user". It's embarrassing for other users. In XP when you come back, screen saver, all user accounts would automatically appear on the Welcome screen. How can I get this to happen in win7?

  In addition, the only purpose to use the screensaver is to get the Welcome screen to appear on the next action. Is it possible to get just the upcoming welcome screen after a period of time even without first having the active screen saver?
  Thanks in advance.

  To first answer you last question: Yes, you can have the login screen appears without a screen saver.  Use the "nil" screen saver and you can still set a timeout of the logon screen.

  

  Regarding your first question, I do not think there is a way to do it.  There is a policy setting, you can configure it to decide if the last user appears, but I think that it only works on the areas:

  http://TechNet.Microsoft.com/en-us/library/cc938084.aspx

• How to display all the data to a database with the same name?

  I am familiar with the creation of basic website, but I want to learn how to create more dynamic Web sites.

  I create a Web site where a user can register on the site and counts there. Once into account here, there will be different options they can do.

  The new application form is in the section account it is configured for a user to submit a multiple application and save it in the database, that works, but the problem I have is during the examination of the application, it does show that one of them, not all.

  How can view the request of a user, sign in?

  

  I can get to the screen, but not all.

  Is it possible to do this or any suggestions on how to do?

  Here's the code for the ReviewRequest:

  <? PHP require Connections/Connections.php"?" >

  <? PHP

  session_start();

  {if (isset($_SESSION["fname"]))}

  }

  else {}

  Header('Location:NewRequest.php');

  }

  ? >

  <? PHP

  $User = $_SESSION ['Pnom"];

  $result = $con-> query ("SELECT ALL * from newrequest where Fname ="$User"" ");

  $row = $result-> fetch_array (MYSQLI_BOTH);

  $_SESSION ["FirstName"] = $row ["Fname"];

  $_SESSION ['location'] = $row ["Location"];

  $_SESSION ['description'] = $row ['Description'];

  ? >

  <! doctype html >

  < html >

  < head >

  < link href = "CSS/Master.css" rel = "stylesheet" type = "text/css" / > "

  < link href = "CSS/Menu.css" rel = "stylesheet" type = "text/css" / > "

  < meta charset = 'utf-8 '.

  ReviewRequest < title > < / title >

  < / head >

  < body >

  < div class = "Container" >

  < div class = "Header" > < / div >

  < div class = "Menu" >

  < div id = 'Menu' >

  < nav >

  < ul class = "cssmenu" >

  < li > < a href = "Account.php" > account < /a > < /li > ""

  < li > < a href = "UpdateAccount.php" > update account < /a > < /li > ""

  < li > < a href = "NewRequest.php" > new request < /a > < /li > ""

  < li > < a href = "ReviewRequest.php" > Review Request < /a > < /li > ""

  < li > < a href = "LogOut.php" > sign out < /a > < /li > ""

  < /ul >

  < / nav >

  < / div >

  < / div >

  < div class = "LeftBody" > < / div >

  < div class = "RightBody" >

  < name of the form = "form1" method = "post" action = "" >

  < div class = "FormElement" >

  < label for = "FirstName" > < / label >

  < input name = "FirstName" type = 'text' required class = "TField" id = "First name" value = "<?" PHP echo $_SESSION ['FirstName'];? ' > ' >

  < / div >

  < div class = "FormElement" >

  < label for = 'Place' > < / label >

  < input name = "Location" type = 'text' required class = "TField" id = 'Location' value = "<?" PHP echo $_SESSION ['Location'];? ' > ' >

  < / div >

  < div class = "FormElement" >

  < label for = "Description" > < / label >

  < input name = "Description" required class = "TField" id = "Description" value = "<?" PHP echo $_SESSION ['Description'];? ' > ' >

  < / div >

  < / make >

  < / div >

  < div class = "Footer" > < / div >

  < / div >

  < / body >

  < / html >

  You would browse the information stored in the $result variable.

  $result = $con-> query ("SELECT ALL * from newrequest where Fname ="$User"" ");

  As below:

  fetch_assoc()) {? >}

  (I don't see a reason to assign data to a variable of $_SESSION?)

  You also probably would be well advised to select information based on a uniquie rather than a name id - if two people have the same name youre UNLESS you want to make sure that two identical Fname can be stored in your tabe stuffed.

  $result = $con-> query ("SELECT ALL * from newrequest where userID = '$userID'");

  userID |     Fname |     Location |                      Description

  8 the end of the road muddy and foggy

  11 this something, no idea

  8               the              rstreet                           rah

  8 is not a clue

  14 Hello Goodbye