How to draw a line connected?

Similar Questions

• How to draw a line (with the line segment tool) then draw another line, from those previous anchor point. When I try immediately draw another line on the other anchor lines it try to turn instead.

  I'm following a course of basic fundamental illustrator on Lynda. The video of "draw straight lines" is troubling me. They draw a line with the line segment and then draw another line coming out the anchor point at an angle.

  Here's where it is troubling me - when I try to drag a line to the anchor point trying to transform the first line, I drew. (the line cursor turns into a selection tool) I can't draw another line connecting the first.

  Advice would be great because it's driving crazy me.

  See you soon,.
  Kyle

  Yes, it is irritating. You must clear the previous line first. If you want to make sure that both ends are perfectly aligned, start by turning on the guides. If you want two lines to be part of the same way, you should use the tool pen instead.

• I have Adobe Acrobat XI and can not know how to draw a line.  I need to redline some documents but can not.  Does version XI even not this feature?

  I have Adobe Acrobat XI and can not know how to draw a line.  I need to redline some documents but can not.  Does version XI even not this feature?

  Yes, Acrobat Pro XI and standard have this ability.
  There is the comment > Annotations > online tool.
  There is the comment > Annotations > tool bar.

  In the Properties dialog box for one, you can select a desired color (i.e. red).
  So, in properties, you can check a choice to make this the default value of the tool.

  Basically, all versions of Acrobat (including the new "DC") offer this feature.

  If you work with a scanned image that has been placed in the PDF don't forget to use the OCR to get an output of a 'real' text - Acrobat provides a feature of OCR.

  Be well...

• How to draw the line under STROKE and fill of an object in illustrator cc? Ideas: D...

  How to draw the line under STROKE and fill of an object in illustrator cc? Any ideas ...

  Aleksandar,

  If I (put) understand it, you will need to divide the object. You can:

  (1) select the object and Ctrl / Cmd + C + F, and then remove the filling of the copy and the blow of the original;

  Draw 2) and drag the new piece down between Division 1 objects) in the layers palette, or select 1 copy) and Ctrl / Cmd + C + F + X + F or similar.

• How to draw a line in Muse?

  I think that it is a stupid Questtion, but I can't.

  How to draw a line?

  Draw a rectangle with 1 Pixel in height and no respect.

  If you want to dashed or dotted lines:

  http://forums.Adobe.com/ideas/1944#comment-5008

• How to draw a line between two buttons?

  Hello.

  I want to do two mobile buttons attached to a line. When changing the position of any button you change in the appearance of the line of course.  I know how to draw a line, but after MOUSE_DOWN and I don't know how to remove an old monotube and how this line to appear all the time?

  My code

  btn2.addEventListener (MouseEvent.MOUSE_DOWN,
  mouseDownHandler3);
  btn2.addEventListener (MouseEvent.MOUSE_UP, mouseUpHandler3);
  btn3.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler3);
  btn3.addEventListener (MouseEvent.MOUSE_UP, mouseUpHandler3);
  
  Set a mouse down Manager (the user is dragging)
  function mouseDownHandler3(evt:MouseEvent):void {}
  var object = evt.target;
  We have to limit them by dragging to the area inside the canvas
  object.startDrag ();
  }
  function mouseUpHandler3(evt:MouseEvent):void {}
  var obj = evt.target;
  obj.stopDrag ();
  spisujemy x, y
  var x2Pos:Number = btn2.x;
  var y2Pos:Number = btn2.y;
  var x3Pos:Number = btn3.x;
  var y3Pos:Number = btn3.y;
  trace (x3Pos);
  trace (y3Pos);
  var roundObject:Shape = new Shape();
  roundObject.graphics.lineStyle (2, 0 x 990000,. 75);
  roundObject.graphics.moveTo (x2Pos, y2Pos);
  roundObject.graphics.lineTo (x3Pos, y3Pos);
  this.addChild (roundObject);
  this.removeChild (this.getChildAt (this.numChildren-1));
  }

  Source. FLA: http://www.mediafire.com/?y2tyzz4zxun

  Here is a solution that you can adapt for two or more buttons...

  var btns:Array = [btn2, btn3]; instances in concert

  handlers all btn
  function setBtns (): void {}
  for (var i = 0; i)
  inclinometer [i] .buttonMode = true;
  inclinometer [i] .addEventListener (MouseEvent.MOUSE_DOWN, grab);
  inclinometer [i] .addEventListener (MouseEvent.MOUSE_UP, drop);
  }
  }

  setBtns();

  inspired by ECCAS btns lines all while occurs wildfire
  function drawLines(e:Event=null):void {}
  Graphics.Clear;
  graphics.lineStyle (2, 0xFF0000);
  ((graphics.moveTo(btns[0].x+(btns[0].width/2), btns[0].y+(btns[0].height/2));

  for (var j = btns.length - 1; j > = 1; j-) {}
  ((graphics.lineTo(btns[j].x+(btns[j].width/2), btns[j].y+(btns[j].height/2));
  }
  }

  managers
  function grab(event:MouseEvent):void {}
  event.target.startDrag ();
  addEventListener (Event.ENTER_FRAME, drawLines);

  }

  function drop(event:MouseEvent):void {}
  event.target.stopDrag ();
  removeEventListener (Event.ENTER_FRAME, drawLines);

  }

  drawLines();

• Draw a line connecting two points in the WPF chart

  I'm trying to understand the best way to draw a line between two existing points on my graph in WPF.  At first, I thought I had it works fine; I just added another parcel to my graph then given exactly two points for rendering.  But I quickly noticed that the app has become surprisingly slow and CPU was quite high (adding other plots does not affect the use of the CPU as long as they have a complete set of points (?)).  He wants me if I looked at using the DataToScreen method on the chart but I can't know what the parameters are.  The second parameter is simply an IList that tells me a lot.  This seems to be the method I want to use for the coordinates of a point on the graph screen.

  No one knows what the second parameter is supposed to be for the DataToScreen method?  Everything I tried throws an Exception of Argument.

  Thank you
  Dan

  DataToScreenwill return a screen coordinate in the plot area of a chart of the value of the raw data horizontal and vertical in the given list. The parameter value is a IList for compatibility with other methods of graphical query such as FindNearestValue , return IList values containing raw data.

  A concrete example, say you had a graphical configuration with a wide horizontal axis ranging from 0 to 100 and a vertical axis double precision ranging from 10 to 20:

  
          
              
              
          
      

  To get the screen coordinates of the value at the center of the two axes, you can call:

  graph.DataToScreen(plot, new object[] { 50, 15.0 })

  Note that the raw data values corresponding to the type of axes (horizontal AxisInt32 returns the integer 50 and vertical AxisDouble Gets the value 15.0 ).

  You also mentioned a performance issue where "adding other plots does not affect the CPU so that they have a complete set of points". I did a simple test app that adds an array of two points of a chart on each key (for example graph.Data.Add(new[] { new Point(x1, y1), new Point(x2, y2) }); ), but could not reproduce the problem you saw. Could you share the code, you use to draw the connection line?

• How to draw a line on Illustrator uses Excel via VBA coordinates

  Void line_viaCoordinates()

  Set appRef = CreateObject ("Illustrator.Application")

  IAPP Dim As New Illustrator.Application

  Dim idoc as Illustrator.Document

  Dim Illustrator.PathItem As isquare

  Define the idoc = iapp. Documents.Add

  Dim lineList (4)

  lineList (0) = Array (50, 50)

  lineList (1) = Array (50, 100)

  lineList (2) = Array (100, 100)

  lineList (3) = Array (150, 80)

  lineList (4) = Array (90, 200)

  "my question is: how to turn this painting (50, 50) in table (LINE B1, RANGEC1)..." So whatever the number, I type this cell to Excel, Illustator it will use as input to draw the line.

  Define isquare idoc =. PathItems.Add

  iSQUARE. SetEntirePath (lineList)

  Isquare = Nothing set

  Define the idoc = Nothing

  Define the iapp = Nothing

  End Sub

  You can use the range or cell objects to get a reference to your range values

  in this example, the data is on the A1 to B5

  Dim lineList(4)
  
  lineList(0) = Array(Cells(1, 1).Value, Cells(1, 2).Value)
  lineList(1) = Array(Cells(2, 1).Value, Cells(2, 2).Value)
  lineList(2) = Array(Cells(3, 1).Value, Cells(3, 2).Value)
  lineList(3) = Array(Cells(4, 1).Value, Cells(4, 2).Value)
  lineList(4) = Array(Cells(5, 1).Value, Cells(5, 2).Value)
  

• How to draw a line when running

  I need to draw a line at run time, and I found this myShape.graphics.moveTo '(100, 100);  myShape.graphics.lineTo (200, 200); "but do not know with certainty how to declare myShape, I think he needs 2 lines to declare correctly, right?

  :

  var myShape:Shape = new Shape();

  addChild (myShape);

  myShape.graphics.moveTo (100, 100);

  myShape.graphics.lineTo (200, 200);

• How to draw a line under the first paragraph

  Hello

  I am trying to solve a problem: my text field should be divided into two parts, horizontally. First part is intended for a log book, and the second is for the body. I need to divide them visually tracing a line between them. The logic is to take the first paragraph and make a summary. The rest is the body. So I need to be able to get the height of the first paragraph in order to draw the line at the right position. And I will have to adjust its position whenever the user scrolls the text.

  Any ideas how to on this subject?

  see you soon,

  Jan

  There is a discussion about the various ways to do it in this thread:

  http://forums.Adobe.com/message/3382440#3382440

  You will also find the recent message on the blog useful:

  http://blogs.Adobe.com/tlf/2011/01/decoration-example.html

  -robin

• How to draw a line on a pic

  CCan I draw a line on a photo in the photo app. ??

  No, but there are many annotation applications in the App Store. To start try Skitch.

  Almost all drawing applications allow you to set photos, then draw over them, too.

• How to draw the lines automatically

  In LabVIEW I must draw a line automatically (both vertically and horizontally) the user will define the vertical and horizontal number lines.

  Is this possible with LabVIEW

  Thanks in advance

  You move to the point of departure of the line using "move the pen", and then draw the line using "draw the line".

  Repeat for each line. (using for example a for loop and autoindexing on positions).

• How to draw a line in Captivate 8?

  I must be missing something obvious, but there is no option of the straight line in the menu forms in Captivate 8 as it was in version 7. and I can't find any other way to draw a line of in Captivate.  I spent some time looking for the forum and the web but only found references using the forms menu in earlier versions.  What Miss me?

  Some features are missing for reactive projects: http://helpx.adobe.com/captivate/kb/top-issues-captivate-8.html

  Ray, free polygon and free forms are on the list. But for normal projects is available. Problem is that not all the form are visible under the large button shapes, you must choose one, then go to the properties panel to see more in this category. Space-saving, I agree.

• How to draw a line without anti-aliasing?

  I need to create lines for the selected underline buttons in a video menu. If I create a straight line with the line drawing tool line is anti-aliased. According to the position, it has more or less anti-aliasing and as yet will not display the colo complete them lines have different thickness or length. Is it possible turn of anti-aliasing for the daw line tool? I saw no option.

  As a solution, I found only the possibility to use the selection tool and then fill it out. The resulting sharp edges.

  Marcus

  Shape layers are always smoothed, but the nature of the beast, if the shape is not exactly on the limits of the pixels.

  The question is not to disable anti-aliasing, which is impossible for a shape layer - the trick is to get the shape traced on the limits of the pixels.

  Unfortunately there is no option to draw lines on the limits of pixels, but because of some options new added by the Adobe creative team you CAN draw rectangles on the limits of the pixels by selecting the rectangle tool and choosing this option:

  

  -Christmas

• How to draw a line in time

  I want to draw a line, so that it looks, it is the transition from one point to another. Basically as it is drawn from point A to point B. I am able to draw a line with ActionScript, but I need to put a little interval in there (maybe 1/2 - 1 second) so that it looks like the line is drawn.
  
  Does anyone have any suggestions.
  
  Thank you.
  
  Dave

  might as well use onEnterFrame, pretty easy if the line is straight, if you're going to angle or curve you will need to use a little math to determine the next point. But for a left right right example of ot, try: