How to enter the master as3 classes?

OK I am trying to use an item in list to the Director, but I encountered a small problem.

I have my cellRenderer class I built and tested in AS3, how do I get it in Director?

In the not so useful help files, it reads:
With the help of Director / using Flash, Flash components, and other Interactive Media Types / list component

List.cellRenderer assigns the class or the symbol to use to display each line in the list.

How? Any ideas?

See you soon!

-Dan

Director 11 is NOT compatible AS3. It does not support the a bit. It does not support any part of AS3. If you use AS3 in your Flash animation and import or link this Flash movie to a movie Director 11, then your Flash animation will not work correctly.

This will probably change in the future with an update to the xtra Flash, but as of this writing, AS3 DOES NOT DO WORK in the films of Director 11.

Tags: Director

Similar Questions

  • How to enter the BIOS on Satellite U200 settings?

    How can I get into the BIOS menu until windows has started?
    When the laptop starts up, I press F2 so he give chose device which need to read.

    In my other pc I push DEL and the BIOS is here.

    I have the Satellite U200. I have software called and write BIOS version 1.10.04/03/2004

    There must be key to enter the BIOS settings.

    To wear? s manuals I na? find information about entering the BIOS settings.

    [email protected]

    Hello

    To enter the BIOS settings, please press the ESC key at startup upward. After that, press F1.

    By the way: when you start the laptop for a moment you can see the message how to enter the BIOS settings. It is displayer downstairs left at first upward.

    Button led will be used on desktop computers, not on laptops.

    Good bye

  • Qosmio X 70-B-102 - how to enter the BIOS

    Greetings.

    Just a simple question. I think so.

    How in the BIOS of my laptop? Boils usually to press the Functionkey right (or combination of both) during the startup. My problem is that when I start my Qosmio, I don't see a message that tells me which key support. Can I be missing something (each time?), but I do not.

    I read the documentation that came with my laptop when I bought it, but couldn't find anything out there on how to enter the BIOS.

    Any info is greatly appreciated.

    Willem.

    Most of the settings can be modified from the Toshiba Control Panel utility, if you really need access the Bios here is the procedure on windows 8:
    http://www.eightforums.com/tutorials...ndows-8-a.html

  • Tecra S11 - how to enter the BIOS?

    Hello

    I have a Tecra S11 with windows 7 Enterprise 32-bit installed. I want to make a backup image and install Windows 7 Enterprise 64-bit. However I can't understand how to enter the BIOS to change the DVD player to the first boot device.

    After that 1 second a Toshiba logo, I asked a user password, after that it directly starts in the currently installed Windows 7.
    ESC, del, f1, f2, f10, f11, f12, tried them all, but no BIOS menu is located. What is the trick?

    GR,

    Hello

    According to the user manual you must press the F2 key to enter the BIOS setup, but you must press the front key Toshiba logo appears.
    It work?

    Alternative, you can change the boot order using tool "Toshiba HWsetup' which is preinstalled on your laptop.

  • Tecra 8100: How to enter the BIOS

    BIOS settings made using Toshiba Windows utility or how I
    Enter the BIOS during boot? What button I push on?
    Thanks in advance for answers!

    Hello

    Yes, you are on the right track.
    The most common BIOS settings can be changed in the Toshiba HWSetup utility.
    But it seems that the Tecra 8100 uses a Toshiba BIOS, and so you should be able to access the BIOS by pressing ESC and F1.

  • Tecra 8000 isn't boot from CD - how to enter the BIOS?

    Hello

    I have a 2nd hand tecra 8000.

    Now, it does not start from CD? I don't know why... but a question is to know how to enter the BIOS setup, because is not possible with the F2 key.

    How to enter the BIOS?

    Thank you too

    Francisco
    ([email protected])

    Hello

    ESC key to enter the BIOS settings.

  • How to enter the BIOS on my L50 A k4W Satellite settings?

    Help me pls! How to enter the BIOS settings? I don't know, and Google doesn't help me not =;)

    As a first step, you will need to perform a complete shutdown.
    Here's a HowTo:
    http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

    The fact is that Win 8 keeps the laptop but the unit carries out hybrid stop start up more quickly. Unit should be stopped in order to access the BIOS.

    Recommencer start laptop, then press F12 to get into the boot menu. You can you find the option for the BIOS settings. You can also try with F2 at start up.

  • How to enter the Bios Setup Satellite 4030?

    I am looking for information how to enter the Bios Setup.

    To enter the BIOS settings, use the ESC button.

  • How to enter the BIOS on Equium L10 settings?

    Please can someone tell me what I press the button too enter the setup of the bios at the beginning when I turn on my pc cos I tried everything, but nothing works.

    Hello

    Whenever when you switch the laptop you see on the low left hand site short instruction how to enter the BIOS settings. In your case you must use the F2 key. Please, keep it down immediately after switching on the laptop.

    Generally, Toshiba laptops come with two different versions of BIOS (producer of BIOS):

    -TOSHIBA BIOS: enter using the button ESC and F1
    -Phoenix BIOS: enter using the F2 key.

    According to the specs of your device has Phoenix BIOS.

    Good bye

  • Satellite P50T-A01C - how to enter the BIOS settings?

    Can someone tell me please how to enter the bios on the Satellite P50T-A01C
    I tried fn f2, f10, delete, not go...

    Does anyone know how to get?

    Thanks in advance.

    If you use Win8, you must proceed to a full stop, and then after the new departure enter the BIOS settings.
    Please check - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Try to please and post comments.

  • How to enter the BIOS on the new Satellite L300?

    Hello

    Just bought today... I can't wait to install other operating systems, but can not understand how to enter the BIOS to boot from the CD.
    Any help appreciated

    Daka

    When you start your laptop (Toshiba homescreen) Please check the white bar at the bottom and read what is written there.

  • How to enter the IdeaCentre Q700 BIOS setting screen?

    How to enter the IdeaCentre Q700 BIOS setting screen?

    Tried F1 and there is no setting in the BIOS.

    Thanks for any help!

    Hi and welcome to the forum!

    Lenovo's Manuel said:-

  • pavalion ab219tx: how to enter the bios setup

    How to enter the bios configuration on my computer hp laptop ab219tx?

    @sahadeb

    After you have turned on the press ESC or F10 to start.

    REO

  • can I use the screen touch iq526 as a monitor to another computer? If so, how to enter the video?

    can I use the screen touch iq526 as a monitor to another computer? If so, how to enter the video?

    You know, it's just a thought.  I'm not sure that the differences between the iq526 and iq770, but as I was looking around I found this article.  I don't know if it'll help, but you might want to take a look.  Obviously someone understood how to use the HP touchsmart as an external monitor for his Dell laptop.

  • Lenovo book Yoga - how to enter the BIOS?

    Hello

    I want to buy Lenovo book of yoga with Windows 10. But before buy you, I need to know if is it possible to enter the BIOS. I was in the shop where yoga book was posted and I tried to restart and enter the BIOS. But when the reboot was keybord inactive (turned off), he was not lucky enough to press any button to open the BIOS...

    Thus, at - it someone to know how to enter the BIOS?

    Thanks in advance

    Pavel

    Good evening

    To enter the Bios of the Yoga book, you need to restart by pressing Power and Volume +.

    Good evening!

Maybe you are looking for

  • Synchronization with single device synchronization server

    Hello This must be a FAQ, but I'm not, so this is. How can I sync data from the server for synchronization to Mozilla to one device? The context is that I am currently running Ubuntu Linux USB on my computer at home, because the boot on this computer

  • For some reason, I don't have the Firefox Button instead? by the left corner. I don't know I clicked on something somewhere. What

    That will probably be an easy solution; just something I turned off while it is in beta. I "file edit view Favorites Tools Help" in the upper part, but do NOT have the Firefox Button. Any ideas?

  • 23EL933G problems with media player - format file not supported

    HelloI Joust bought a led 23EL933G TV.The tv works fine, with the exception of the media player:He did not play much media o, souch as pictures, mp3, mkv... She responds: unsupported file format. I updated the firmware of the original 112 to 116 more

  • USB 3 on a Z500 problem

    I bought Windows 7 so I could downgrade from Windows 8, installed all the drivers and BIOS updates to the new Version. As soon as I tried to install the Drivers for the USB 3, I had the BSOD, thinking that it is perhaps down to the version of the dri

  • Controlling many GPIB

    Hello I just saw in my laboratories there are many instruments with GPIB port. I know that I can control and enter the data from the instruments. However, control of several instruments with GPIB communication simultaneously? Networking analogy, I kn