How to export the HTML with size in percentage

Similar Questions

• How to export the same MB size of my cr2 files in jpg or tiff files in Lr?

  How to export the same MB size of my cr2 files in jpg or tiff files in Lr?

  Let's say that my height is 22 MB, when I export the file in TIFF or jpg, although careful Iam with size of file settings, size, resolution, I can't manioukate how I want it.

  With jpg I tried everything, no matter what I do or a change in file size or meanless remains the same size - 7 mb instead of 22...

  Please advise,

  Best wishes

  T

  You should not even try to do it.

  JPG uses compression technology, so the files will have to be smaller than the original size of your RAWs. In addition, JPGs are 8-bit, while your RAWs are probably 14 bits, so the size needed to store your image will be smaller.

  Thus, there is absolutely nothing wrong with getting a 7 mb JPG of a 22 MB RAW.

• How to export the reports with permissions information folder

  When I try to export the reports with permissions information folder, it still get error.
  for example, when I run command below:
  ICommand - cmd export - name "/ public/report/Demos/Call Center"-folder permissions type 1 - file 'c:\call.xml '.
  
  It will get the error:
  Oracle BAM utility command [Build 6512, BAM repository Version 2024] copyright law?
  2002, 2009, oracle and/or its affiliates. All rights reserved.
  Export the folder ' / public/report/Demos/Call Center '...
  Export of report public, report, Demos, Call Center / Reassign Action case...
  BAM-02518: unrecognized parameter: permissions
  [ErrorSource = "Import-export", ErrorID = "ExportImport.InvalidParameter"]
  
  It seems folder to export successfully, but cannot export reports
  
  Thank you

  I'm on PS1 11R1 and it works for me. I think you're on R1 - it is likely that R1 might have a bug that crept in PS1 (although I'm not able to locate any such bug in PS1) or there may be a corruption in your environment. My suggestion is upgraded to PS1.

• How to export the file with the content

  Hello
  
  Is there any tool in WCC 11.1.1.6 to export a desirable folder for all the content (of the nested folders and content elements)?
  
  Kuba

  Hello

  Yes, you can use the folder Structure Archive component to export the folder and it's subfolders + content. The same information is available from the following documents:

  http://docs.Oracle.com/CD/E23943_01/doc.1111/e10792/c08_migration.htm#CHDIIJBH

  See also: https://blogs.oracle.com/kyle/

  Thank you
  Srinath

  Published by: Srinath Menon on January 16, 2013 09:03

• How can I see the HTML with MUSE?

  Can I see the html code used to build my site of MUSE?

  and we are allowed to overlap paragraphs, titles and banners?

  They show on the cell phones?

  1. you can view the source code in any browser or you can export the HTML with file > export as HTML.

  2. Yes, you have full control of the layout of your Web site. You can stack as items/paragraphs/let it be as you want.

  3. depending on what you mean by them , the answer is probably yes.

• How to export a video with two audio tracks such as: English and a steam engine, then open in vlc player, then select one of the two tracks?

  How to export a video with two audio tracks such as: English and a steam engine, then open in vlc player, then select one of the two tracks?

  Everything you always wanted to know about the acoustics in first Pro CC - YouTube

• How can I export the schema with all objects and a few tables without data

  Hi all
  
  Verion 10g EA.
  I export the schema with all objects but I need ignored some of the data in the table.
  
  There is a table 4 people gave huge, we need not to export data from tables but structure must export.
  
  
  Thank you
  Nr

  You can do this with a single command.  Run your export as usual and add the query parameters for 4 tables you want all the lines:

  expdp... query = schema1.table1: "where rownum = 0" query = schema2.table2: 'where rownum = 0'...

  It is best to place the query parameters in a parameter file if you don't have to worry about escaping special characters of the OS.

  Dean

• How to get the HTML for a button created in Muse

  I am trying to create buttons in Muse and then share the HTML for these buttons with a developer.  How can I do this?

  Hello

  You can export the HTML code for the Muse Site via the "Export as HTML" option in the file menu.

  It will be useful,

  Sonam

• How to export the output document for real cinema screen film

  recently, I made a documentary film. My documentary film was shown in the screen of the great real cinema at the film festival

  However. It was not published in 16 / 9. my film stretched to the size of the screen.

  I filmed with HD and HDV. I used the Canon Mark 2 camera, gopro and sony Z 5

  When I used first pro CS5, I export the movie with H264 (HDTV 1080 p high quality)

  is - this just how I export the movie to screen large cinema with first Pro CS5

  Let me know on this subject?

  The 16:9 screen?

  The size of the screen has nothing to do with it.

  Your image was distorted on the screen?

  If you have exported your 1080 16:9 properly with correct BY etc. and specification of the festival... then they projected in correctly.

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• How to change the default font size in Word pad

  How to change the font and size of the default settings in wordpad?

  Thank you

  You can change the font and size and then save it as a template - ex: default.wri

  Navigate to this file and make it read-only. Create a shortcut to it and use it as WordPad in the future.

  It will always come back with the font settings that you put, but you will need to save it under a new name every time (you usually do in any case).

  There is no other way to keep the settings of fonts in WordPad.

• How to make the default text size and line spacing in small Sticky Notes?

  How to make the default text size and line spacing in small Sticky Notes

  Hello

  I suggest that you try the method below and check if it helps.

  Method 1: analysis of auditor of file system (CFS)

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. To perform a scan of the SFC, check out the link: https://support.microsoft.com/en-us/kb/929833.

  Note: the steps for Windows 8/8.1, works perfectly with Windows 10.

  Method 2: clean boot

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you install a program, an update or when you run a program in Windows. Follow the link to perform the clean boot: https://support.microsoft.com/en-us/kb/929135.

  Kind regards

  Angelo bar

  Microsoft community

• How to export the indesign file to coreldraw

  Hi all

  I had created a brochure that would be printed to a professional printer. There, they use Indesign. Instead, they use Corel Draw.

  How to export the indesign file created in corel draw.

  and printing

  @Dov, sorry. But there are places on Earth where the upgrade to a more modern workflow just will not happen either by choice, or more often, because of the money. I've dealt with a few printers to India use CD (beautiful dig to Corel, btw) or Illy. Just like that.

  @srikanth977, all printers I treated using an older workflow and equipment that use CD or Illy for output agreed a PDF file. In addition, each of them wanted to PDFX-1A a PDF file without crop marks, bars of color, etc.. So check with your printer. They then add these features when they print.

  Best regards, Mike

• How to connect the Ombudsman with several bpel process

  Hi Please someone tell me how to connect the Ombudsman with several processes bpel in soa 11g

  And here

  http://eoracleapps.blogspot.com/2009/11/how-to-call-synchronous-BPEL-process.html

• Cannot export the chart with result when discoverer report is run u

  Hello
  
  I am trying to automate the discoverer, calendar using the Scout command line interface, the following command runs the report * "Facilities assigned to the employees-ORG" * in the batch, export the results to Microsoft excellent sheet.
  
  This command exports successfully results in excel format in the location specified in C:\drive, but did not export the graph associated with the report.
  
  also if we compare the exported results for the report ran in more Discoverer and discoverer Office (using the command line) is not in the same format in excel (excel export result is very good compared to the results of the command line).
  
  Is it possible to have the results in the same format and graphics using command line? is possible to execute commands on the application server side so that we can retrieve the results and a similar graph when this document comes in addition.
  
  
  Command-line END user license.
  
  C:\oracle\oracle92ds\bin > dis51usr.exe/connect n1rpawaska/[email protected] /opendb "equipment assigned to the employees-ORG" / batch/Export xls "C:\CPEReports\ equipment assigned to the employees-ORG".
  
  
  Thank you
  Sunil

  Hello

  It is not possible to export charts in an Excel file. If you want to keep the formatting and then try to export the HTML report in .xls file, then open the file in Excel. by example/Export html "C:\CPEReports\ equipment assigned to employees - ORG.xls.

  Rod West