How to extract the text from corrupted pages file

Similar Questions

• How to extract the police from a .pdf file?

  I read a novel in the form of ebook .pdf file. The police is beautiful and I've not seen before. In the pdf file, the police are the same (vary in size, boldness, etc., but the police are the same).

  Can someone tell me if there is a way to extract the name of the font used in the file?

  I went to properties-> fonts and this is the information I found:

  

  Also if you are able to identify the police by simple observation (behind the Properties window, that the word 'way' is written in the font I want) please let me know.

  Kind regards

  -sgsawant

  It looks like a font that comes is not recognized. There is not much you can do about it. I guess you are trying to say that you just want to know what it is if you can go buy it?

  If so, one thing you could do is to take a screenshot of part of the text then run via http://new.myfonts.com/WhatTheFont/. It does a decent job of identification of fonts.

• How can I remove text from a PDF file?

  How to clear the text from a pdf file

  Hi iggybuskus2,

  If you want to change the text in a PDF document, you will need to use Acrobat. You can download a free Acrobat www.adobe.com/products/acrobat.htmltrial, if you want to test.

  Best,

  Sara

• How can I copy text from a pdf file in firefox?

  I no longer seem to highlight and copy the text from a pdf file, while in firefox 33.0, using adobe to view PDF files.

  How do I activate the selection tool, so I can do this?

  If there is text to be copied (in other words, if the pdf file is not a scanned image of the text), by default, you should see a pointer that will change when you hover over the text to an ibeam.

  If you see a hand tool, click on the double arrow towards the top right of the display screen to get a drop-down list and select "disable the hand tool.

• How to extend the text on several pages in 9

  My form is long and a section of the Master Page will be text with no shape field, but the text is 10 + pages, depending on the version of the terms and conditions described.  In this link, http://forums.adobe.com/message/5112687, there are a lot of discussions about how to accomplish in 8.2, but how I would accomplish in 9?  I wish I could paste pages 10 + and automatically do master stream for this section of the Page. Have tried to place a text field and also tried a text in a fluid subform, assigning several lines, keep later, but is not only of course how to set up properly.  I see the sign at the bottom of the text box, but when I saw it, it does not flow to the other pages.  Hoped to avoid setting up 10 + pages in the form, from the time these terms are updated, and it would be much faster to just be able to copy and paste from Word in a correctly set text field or subform.  Hope that makes sense and to appreciate all the advice, thank you.

  1. Get your text in Word (or anywhere where you want to change the text so that it looks right).
  2. Open a document in LiveCycle (a new one if you are starting from scratch, in any case)
  3. Select your subform page1, set the content to be Flowed (allow page breaks automatically).
  4. Add a text field (make sure it is listed under this subform page1).
  5. Change the position of the legend to zero text box and make sure allow multiple lines is verified (as well as allow page breaks). Expand a height fixed auto
  6. Click the default value for the text field. Paste this 9 page document inside.
  7. Wait a few seconds (or minutes) for LiveCycle catch up.
  8. Listen to samples and enjoy your new document with several pages paged automatically for you.

• How to extract the signal from the waveform of my power level designated?

  Hi all

  How can I extract the signal of the waveform accroding to the power level? I read the Trigger & Gate .vi, but this vi retrieves the signal duration. I want to extract the signal depending on the power level.

  As shown in the following figures, the signal I want to deal with is between 130000 to 140000, if I Zoom, I can see the useful signal is between 135400 to 138200. The question is how to extract the signal in the area?

  I tried the sub_NoiseEst_And_Chop_Shell.vi in the example of Packet_based_link also, but this Subvi seems to be a bit slow. Can someone give me the best advice? Thanks in advance!

  

  

  I'm working on something similar, but have not had time to fully develop.

  My idea was to use an envelope detector (low pass filter) and then use a detection of energy VI on the envelope.

  Here is where I left

  

• How to get the text from TextFlow?

  Hello

  I want to extract (String) text from a TextFlow control.

  If you have an idea...

  Thanks in advance

  Fabrice.

  Ok thank you.

• How to bind the text blocks between pages?

  Hello

  I searched all autour for this, and I'm guessing that the answer could be so simple that no tutorial it doesn't even mention:

  How can I link the blocks of text between pages? I made a block of text in each master page and then connected one left with the one on the right. Indeed, all of the text in the document is linked from the page on the left of the right-hand page. But how do I link the page on the right with the following two pages 'below' in the document?

  If I'm not clear, here is another attempt to explain: I'm going to insert a lot of text in a document, and I already know the size and the type of text block, I want the text inserted. When I put the text in the left side, it connects (goes on) the block of text on the right side. But it stops there. So I have to manaully through both pages, which connects the right page "at the top" with the left 'below', page by clicking on the image by clicking on the small arrow in the lower right corner, and clicking on the next page below. There must be a way to organize it in master pages or in some other way?

  Thanks in advance for helping me with this problem of small size, but huge!

  Best

  Kim

  Two things...

  For "automatic formatting" to work with Captain linked frames page, you must NOT release the Master frame before placing the text, and you must click inside the image area, not any sort of guide.

• How to extract the text of procedure of a packege

  Hi all
  
  can someone help me to retrieve the text of a procedure from pl/sql to a packege.procedure name is "CALC_BUNUS" of packege "EMP_BONUS."
  
  Thank you
  Ankur

  I don't think you can get a code of procedure of a package, but what you can do is get the whole package code and just manually extract the package code procedure.

  To get the package code, you can query ALL_SOURCE.

  Or you can use DBMS_METADATA. GET_DDL and extract the PACKAGE code.

  SELECT DBMS_METADATA.GET_DDL('PACKAGE',)
    FROM DUAL
  

  Published by: Karthick_Arp on May 31, 2010 23:15

• How to read the text from a DOS window in real time?

  I call an executable file that downloads a file to flash memory.  This program displays status information in real time as the percentage of completion in one window BACK.   It also makes account of the CRC of the file as it downloads.  I am currently redirect the output of the DOS window in a text log file.  This works fine for obtaining of the CRC when the file is actually downloading but the operator loses the visibility of the State in the percentage of download.  Is there a way to read text information in a DOS window with my request of LabWindows/CVI real-time?

  Hi Brent,

  If redirect you the output from the first application in a log file, you would be able to read the contents of the file streaming to your second request, and whenever the content changes (such as the download value percentage), couldn't display you this information immediately with the second request in one window DOS or some other GUI?

  Luis

• How to extract the data from each row

  Hello
  
  I wrote a CQL query with lines 3 records. Is it possible in this query to fetch the first record and last present specific field values.
  
  for example,.
  Column: c1, c2, c3
  Record1: id1, 2,3, 3.5
  Record2: id2, 2.3, 3.6
  record Record3: id21, 2.3, 3.7
  record Record3: id25, 2.3, 3.9
  
  I need to get the average of three rows of c3 and get the first record id and last record ID.
  
  Output 1: id1 id1, avg (c3) = 3.5
  output2: id1, id2, avg (c3) = 3.55
  Output3: id1, id21, avg (c3) = 3.6
  output4: id2, id25, avg (c3) = 3.733
  
  Please help on above.
  
  Thank you
  Sri

  Hello

  Not quite sure that understand what is the problem that you see.

  Here's what I got when I ran the query:

  Input data:

  C1, c2, c3
  ID1, 2,3, 3.5
  ID2, 2.3, 3.6
  id21, 2.3, 3.7
  ID25, 2.3, 3.9
  DELAYED26, 2.3, 4.0
  ID27, 2.3, 4.1

  Query:

  Select T.firstC1, T.lastC1, S1 T.avgC3
  () match_recognize
  measures
  First (M1. C1) as firstC1,
  M2. C1 as lastC1,
  AVG (C3) as avgC3
  all matches
  model (A B? C ? | D + C)
  subset m1 m2 = (A, B, C) =(A,D)
  define
  At as prev (A.c1) is null.
  B as (count (*) = 2),
  C as (count (*) = 3),
  D like ((prev (D.c1) is not null) and (count (*))<>
  ) t

  Output:

  firstc1, lastC1, avgC3
  ID1, id1, 3.5 - avg only trace
  ID1, id2, 3.55 - avg from two records
  ID1, id21, 3.6000001 - avg from three recent reviews
  Id2, id25, 3.7333336 - avg from three recent reviews
  id21, delayed26, 3.8666668 - avg from three recent reviews
  ID25, id27, 4.0 - average last three book reviews

  This output confirms with you that mentioned the expected results?
  Can you please run this query as it is on the above mentioned input data and check by yourself?
  If you don't get the desired result, please paste the input data provided, complete the text of the query and the outputs.

  Concerning

• Smartphones blackBerry how to extract the text messages to sim card (7100)

  I sent and received texts before I found that I could put my BB not to keep texts on the SIM card

  I've got 6 here I would save but I can't understand anyway to do

  When I save the BB to fund manager messages don't are not there - I tried to 'depot' in various different folders on the SIM card, but it makes no difference

  Someone at - it ideas?

  Thank you

  Mike

  There is a third-party application that will send messages text for you, but other that that the only thing that you can do in native mode is to copy the text and paste it into an email and send it to yourself.

  Filing applies only to email BES (BlackBerry Enterprise Server) accounts.

• How to change the text in a .jpg file?

  I just bought Creative Cloud 6. I am a student in Adobe TV to learn Photoshop. Years ago, that a friend created a .jpg file custom that I used for my letterhead.  I now want to use it as my Web site header.  The text in the file should be changed and my friend is not available to help.

  Hello

  Here's a video depth on replacing text in a jpg image. It is probably more complex than what you need, but it covers a very useful material.

  If you post a cap of screen of the image that you are working, we can give you a faster and more accurate solution. Thank you!

• There are reports of a virus or worm can read and extract the text from the pages of Notes of Windows?

  Just curious to know if it is safe or does not keep sensitive information on pages of Notes.

  Alternatively, is it possible to encrypt a page of Notes?

  Thanks for your help.
  Tom

  Hi Tom,

  It is not safe to store important and vital, sensitive information on a Notepad or pages.

  You can use the drive encryption BitLocker to protect all files stored on the drive Windows is installed on (operating system drive) and on data drives (for example, internal hard drives). Your can use BitLocker To Go to help protect all files stored on removable data drives (such as external hard drives or USB flash drives).

  For more information, see the link.

  Protect your files using BitLocker Drive encryption

  Hope this information helps. If you have any questions, please let us know.

• How to change the value from another page

  I'm filtering province in my application based on a province selected in the home page (P16), however the user can submit a form that has a province that and after that, all the content must be filtered according to the selected province 'new '. So I'm in the P7 and after submitting the form, I would need to change the P16_PROVINCE - which belong to another page (P16).
  
  but do not know how,
  Any help?

  Mehrdad says:
  Thanks, VC, but I need to have a trigger to change the P16_PROVINCE after submitting the form, so that one must be changed according to what the user does on a form...
  After he submit the form, I have my game P7_PROVINCE, which is fine, but AFTER the selection, I need to change the P16_PROVINCE (which is used as a global variable to filter my records...)

  Add a plsql page 7 page process and submit the game it runs - as below

  //assign the value of P7_PROVINCE into P16_PROVINCE
  :P16_PROVINCE := :P7_PROVINCE;
  

  See http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/concept_ses_val.htm#HTMDB03012