How to find out really currently used physical memory and swap space of hard disk to the virtual computer running?

Similar Questions

• I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  Download the CS5 products

• Connect physical hard disks to the virtual machine (and leave the data intact)

  Hello

  I'm looking to virtualize a SOHO headless server, that I use mainly for secure file storage.

  Currently, the system runs Linux installed on a small disc and has two drives 1.5 TB, used exclusively for data, in a cluster of ZFS mirroring. (I use the ZFS-fuse Linux-based application).

  I want virtualization for two reasons. One is to make administration easier and safer - avoid having to connect a keyboard and the physical monitor to the box from time to time. The other is that the machine is a bit more powerful to handle the load, and I'm hoping to make it work on other, more challenging tasks.

  Now, there is a catch. These discs are as highly important. I mean the data on them. What I need is to convert the current Linux system to a virtual machine, or re - install Linux on a virtual machine (don't like that), then connect the physical disks to the virtual machine as if they were actually connected.

  I certainly don't want to vmware touches those disks somehow.

  I've read the documentation, but I'm a noob when it comes to server virtualization and system engineering and don't quite understand if this is possible or not. These discs are not a SAN, they are physically connected to the server, I want to install vSphere on. (Of course, I'll log out when I run the setup of vSphere. But I need plug them again later, and they need to be sure that vmware will leave them alone and pass them to the virtual machine transparent.)

  Sigmoid wrote:

  Oh yes, the cluster mirrored ZFS. It is essentially a software RAID type thingie.

  http://en.Wikipedia.org/wiki/ZFS

  A material, or the point of view of virtualization, it appears two hard drives with a single huge partition on each that is not transparent to anyone, except the implementation of ZFS.

  OK, means that you can break the RAID, connect the drives to different host and configure RAID once again, right?

  Let's do it this way

  1. We will need a disc player more for VM, cause on flash, we install ESXi
  2. I will share ZFS :-), all you need to do with that before you install ESXi
  3. make the BACKUP!
  4. Disconnect the data host drives
  5. install ESXi 4.1 U1 free version on flash
  6. Download the site VMware vSphere client
  7. Connect the VM disk to ESXi
  8. customer help create the virtual machine and install the OS on it
  9. stop the virtual machine and esxi
  10. connect DATA drives to the ESXi host
  11. begin to ESXi
  12. See how to add RDM on youtube, after client use, change first hardware VM--> add a new hard disk--> choose Raw Device Mapping--> (physical or virtual) mode--> store it with folder VM - FACT
  13. Start the virtual machine, now your VM should see both drives, with good data course :-)

  I have just made this procedure (add ROW with data in Linux VM) on ubuntu VM, works well

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• How do I disable my account on a different hard disk on the same computer

  I got a new computer, but I need the two uses for computer laptop at school and at home, I had my old hard drive in the new computer thinking that still works, but it won't start.

  Any suggestions?

  Thank you.

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  New account even computer https://forums.adobe.com/thread/1465499

• Newbie - how to add another hard disk to the virtual machine

  We have just started to try ESXI on a new database server.

  The previous server got an SSD, it is necessary that our needs. Now, we got the new Intel Server, was paid $ 3000. There are 2 hard drives and SSD, all on the integrated chipset. We can't find anywere in the interface of PC ESXI or VMWare Go web site to add the SSD to the list of storage. We imported to test an installation of Windows Server 2008 and it works, but only C:, no other hard drive found!

  Help, please!

  pay? -None
  If you connect to http://ip-of-your-esxi , you should see a hint where to download it if I remember correctly

• How to find out what the police are actually using Firefox?

  How to find out what the police are actually using Firefox?
  Inspect the element don't say what substitute fonts.

  Firefox 24 ESR has the tab fonts in the Inspector, which shouldn't be a problem.

  • https://developer.Mozilla.org/Tools/Page_Inspector

• Photoshop CS4 - is - does anyone know how to find out if two people use the same file?

  Photoshop CS4 - is - does anyone know how to find out if two people use the same file?

  Yes, I assumed that was the case, and I thought that this link addressed to her.  I would have thought it was more a function of your network and the OS than Photoshop.

• don't know how to find out the server for my email information.

  I had to reinstall Windows Vista (my computer was a mess), and now I don't know how to get information on the mail server

  I don't know how to find out the server information I need

  to set up my email again.

  Also, my pictures 'lost' since I have done this?

  Hello

  Contact your ISP (Internet Service Provider); They provide your broadband / dial connection.

  Ask them to:

  1. your username with them

  2. your password with them.

  3 incoming mail POP3 server.

  4. the outgoing mail SMTP server

  All the settings that you need to come from them, not Microsoft; and they are usually happy to help you set up your e-mail program.

  You can use this guide to set up Windows Mail, too:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  A relocation normally wipes the hard clean everything, as part of the resettlement process.

  Two things you can try:

  1. find a windows.old folder (depends how you reinstalled Vista)

  "How to restore your personal files after performing an installation of Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/932912

  2. This program has had good results in data recovery in circumstances similar to yours.

  http://www.Piriform.com/Recuva

  See you soon.

• Please inform me how to find out what is my user name.

  Please inform me how to find out what is my user name, so that I can install my upgrade to Flash Player.

  What userid & password should I install Flash Player?

• How to find out if the new menus or responsibilities have been added to the system

  Dear Sir
  
  Please let me know how to find out if the menus or the responsibilities have been added to the system.
  
  OUL5 x 64
  EBS r12 12.0.6
  
  Thanks-Tom

  It is a unique work, or you should always know when a new menu/responsibility is added?
  If it is a time of employment, then you can write a query on the 2 tables (fnd_menus_tl and fnd_responsibility_tl)

  Select * from fnd_menus_tl where creation_date > sysdate - 7

  Select * from fnd_responsibility_tl where creation_date > sysdate - 7

  If you need to do every time, then you can write an alert.
  Go to a responsibility to Alert Manager > alerts > set
  Process = system administration
  name = my Menu new alert
  Click event
  Check the insert box, clear the check box update
  application = application object library
  Table = fnd_menus_tl (or fnd_responsibility_tl)
  Select = Select responsibility_name in & output1 fnd_responsibility_tl where rowid =: rowid
  or, select user_menu_name in & output1 fnd_menus_tl where rowid =: rowid
  Save
  define an action
  attribute to the set of scripts
  make sure click the alert details and enter installation details

  Hope that answers your question
  Sandeep Gandhi
  Independent consultant
  513-325-9026.

• I have osx imac 10.9.5 version and can't use iCloud told me to go to the yosmite should I do this and how do I know if I have enough memory and it won't slow down my computer

  I have osx imac 10.9.5 version and can't use iCloud told me to go to the yosmite should I do this and how do I know if I have enough memory and it won't slow down my computer

  If your iMac can run a newer operating system, it will not let you install. Where possible keep updated for better security.

• I do not use outlook express and still get msg, oe can compact the message. How to stop

  I do not use outlook express and still get msg, oe can compact the message.  How do I prevent this every time that I turn on computer to come.

  You must tell Windows Search to stop indexing OE.

  In the control panel. Indexing Options. Change. Clear the check box for Outlook Express.

  If you see the prompt again, let the compact once to reset the counter and it should be.

• I just switched to a Nikon D80 with a Nikon D90 and I use Photoshop 4 and bridge. I can't open the NEF (raw) images off bridge. How can I get the camera raw dialog screen which came to my D-80?

  I just switched to a Nikon D80 with a Nikon D90 and I use Photoshop 4 and bridge. I can't open the NEF (raw) images off bridge. How can I get the camera raw dialog screen which came to my D-80?

  Devices supported by Adobe Camera Raw

  First of all, the D90 was supported in Camera Raw 5.1.

  Open Photoshop and click on Photoshop (Mac) or help (Win) > Plug-ins > Camera Raw to see what version you use.

  Photoshop CS4 comes with Camera Raw 5.0.

  Try to update Camera Raw in Photoshop to 5.7 via help > updates.

  If this does not work, try to manually edit Camera Raw

  Adobe - Photoshop: for Windows: Camera Raw 5.7 update

  Adobe - Photoshop: for Macintosh: Camera Raw 5.7 update

• Should I move to bridge CC? I currently use CS6 Web and Design.

  I currently own a necessary Design and Web CS6 allowed.  I see in creative cloud to install bridge CC my question is there any benefit questions that I should be aware because I use CS6, I have no plans to upgrade to the CC version my Adobe

  Should I upgrade to bridge C.? I currently use CS6 Web and Design.

  If you use Design and Web Premium CS6, I recommend using Adobe Bridge CS6 with her. Join the discussion Discussion General bridge for more precision.

• Hi Folks, I'm ready to go with the versions of CC of LR and Psalm I currently use Apple products and the iCloud for storing photos, they stay on the iCloud or do they need to go to a related version CC?  Also, I guess that versions CC of LR

  Hi Folks, I'm ready to go with the versions of CC of LR and Psalm I currently use Apple products and the iCloud for storing photos, they stay on the iCloud or do they need to go to a related version CC?  Also, I guess versions CC of LR are Mac compatible.  Can they go on several devices, the cloud itself, including mobile devices like the iPad?  Thanks a lot in advance, Dave.

  You can have your photos on iCloud without any problem.  Lightroom CC 2015 is compatible with mac, please check system requirements of Lightroom CC 2015. You can install Creative Cloud on 2 machines, however, you can't use both the at the same time, the control 1:1 point: http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf

  You can use Lightroom for mobile or your ipad and iPhone. Please check Adobe Lightroom for mobile FAQ

  I hope this helps.