How to find the maximum and minimum of a waveform between cursors

Similar Questions

• View the maximum and minimum values on the waveform

  Hi, I have a table of waveform and want to display the values of maximum and minimum of the graph with the arrow. I tried to change with the property node, but I still haven't expected output. Could someone can help on this?

  Attached to the vi.

  I ran your VI and it seems to work, but it is difficult to report on its work for several reasons:

  1. the default annotation is black, which is difficult to see on black background graphic. Change the color of the annotation or change the color of the graph.

  2. scale there was not settled in auto-scaling, so I had to go to access my data, which makes it also difficult to locate annotations

  3 If you are using auto scale on the y-axis, the annotations will be always difficult to see because they will be outside the limits of the graphic scale car, I would recommend manually set the scales or by using the offset property label of the sliders to make the label in the view visible

  In addition, each time you add two new annotations to the curve, is this desired? If this is not the case, use a constant of cluster of annotation and a cable which, in your package names, then build a table with the poles of two annotation.

  Hope this helps,

  SoC

• How to find the Maxima and Minima for each column of a 2D array?

  Hello

  I have a 2D chart and I would find the maxima and minima of each column of the 2-D table. Even though I know how to get maxima and minima for the whole picture but don't know how columnwise? Any ideas please?

  Thank you

  Rohit

  Hello

  @Smercurio-What you said is true, I should have shown using automatic indexing enabled which is really excellent choice. I just tried to show in a very simple way.

  Anyway, here's the best way

  

• Get the maximum and minimum of a LinearAxis value

  Hello
  
  If I set maximum and minimum of a LinearAxis Nan values, Flex determines that a minimum and maximum value that welcomes all data are displayed in the chart. Is it possible I can get two Flex-determined values?
  
  Thank you very much!
  Terry

  Hello

  If I set maximum and minimum of a LinearAxis Nan values, Flex determines that a minimum and maximum value that welcomes all data are displayed in the chart. Is it possible I can get two Flex-determined values?

  Thank you very much!
  Terry

• How to find the utilities and windows drivers VGN-CR36G 8?

  Hello

  I use laptop Vaio VGN-CR36G with vista ultimate. Now, I want to install windows 8 enterprise edition.

  But I can't find the drivers and utilities on the site of sony vaio.

  But my product is compatible for windows 8 OS.

  Here is the link below:

  http://www.Sony-Asia.com/support/product/VGN-CR36G

  Can someone please help me to download all drivers and software?

  Thank you

  Hi Whiteeasy.

  This model does not support Windows 8 operating system which you can confirm from the link below.

  http://www.Sony-Asia.com/microsite/VAIO/support/GetWindows8/GetWindows8_EN_NA.html?referer=http%3A%2...

  If my post answered your question, please mark it as an "accepted Solution".

• Always backup failed. due to files corrupted. Error message 0x800703F9.How to find the file and fix them?

  Last backup completed in September - how can I save now please

  Hello
   
  1. you remember to make changes to your machine before the problem?
  2. you have any third-party backup utility installed on your computer?
  3. What are you trying to backup?
  4. that you make a system image backup?
   
  Try another backup file and check.
   
  Follow the steps and check if that helps.
   
  Step 1:
   
  I suggest that you run SFC analysis and check if the problem is related to the file system damaged or missing.
   
  Step 2:
   
  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
   
  Warning of Chkdsk.
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How to find the lock and kill session in order to release it?

  Hi all

  EBS R12.2

  "I met ' could not book record" in our case. How to release the session locked?

  I usually do this by bouncing the apps & db level. Is their subtle way?

  
  

  
  

  

  
  

  
  

  Kind regards

  JC
  

  
  

  
  

  Ideally, you should check for locks on the table in question where records are trying to access.

  AFAIK, you must check the v$ locked_object and find sessions.

  Hope this helps!

  Kind regards

  Hugues

• How to find the version and the arc of the installed Oracle client

  Hi all
  
  I have a sles 10 sp2 x86_64 on which customer oracle 10.2 is installed. This facility has not been made by me!
  so I don't know how the oracle client version/architecture (32/64-bit) is installed on the client.
  
  of sqlplus v I get only the version that is installed, and not if it is 32 or 64 bit. How can I find that.
  
  sqlplus v
  SQL * more: Release 10.2.0.1.0 - Production
  
  with a little research on Google I found that the link that says 10g below client 32-bit cannot be installed on a 64-bit system.
  
  I read this Client 32-bit installation on Linux x86_64 RDBMS software. [1075717.1 ID]

  Installing 32-bit RDBMS Client software on x86_64 Linux.
  The only release of 32-bit RDBMS Client software that will properly install on an x86_64 Linux OS system is 11gR2 (aka 11.2.0.x)
  
      * 9iR2 (aka 9.2.0.x) 32-bit RDBMS Client software will NOT install on any x86_64 Linux OS system.
      * 10gR1 (aka 10.1.0.x) 32-bit RDBMS Client software will NOT install on any x86_64 Linux OS system.
      * 10gR2 (aka 10.2.0.x) 32-bit RDBMS Client software will NOT install on any x86_64 Linux OS system.
      * 11gR1 (aka 11.1.0.x) 32-bit RDBMS Client software will NOT install on any x86_64 Linux OS system.
  
  The answer to "why", is that the 11gR2 Client software is the first version that includes syntax so that a 32-bit object is linked.

  can anyone please shed more light on this?

  Hello

  PL see TechNote MOS:
  * How to find if the Oracle Client Software is 32-bit or 64-bit platforms UNIX [434295.1 ID] *.

  Thank you
  A H E E R X

• How to find the lock and more information why the prg conc taking too long

  Oracle Apps R12-Orader management
  
  Hi all
  
  I am new to Oracle Apps, we I run my simultaneous program
  its taking too long to complete. How to find that there is a lock to produce in the table while that simultaneous execution of the program, another way to find why the simultaneous program takes too long to run and how can you speed up the process.
  
  Yesterday we made a few changes to speed up the process with our DBA to accelerate the simultaneous program
  
  The first simultaneous program takes 2 h 30 and after these changes taking 1 h 45. Please suggest it's okay
  
  Connected with the responsibility of the system administrator.
  
  Manager - set - Manager of the standard.
  
  Set the value of PROCESS like 15 (instead of 10).
  
  Set the value of SECONDS of SLEEP as 10 (Changed from 30).
  
  Manager - set - Manager2 Standard.
  
  Set the value of PROCESS like 15 (instead of 10).
  
  Set the value of SECONDS of SLEEP as 10 (Changed from 60).
  
  
  Any suggestion on how to find why it takes too much time.
  
  Any help is highly appricatable
  
  Thanks and greetings
  Srikkanth.M

  Hello

  I suggest you draw the simultaneous program and analyze the trace file. To do this, mark the simultaneous program as Trace enable (RESP system administrator, Menu simultaneous > program > define) and then run the program and download the trace file after dealing with tkprof. Check which are the staements who take most of the time and try to optimize them.

  It will be useful.

• How to find the computer and hostname to get remote access?

  Original title: remote access
  Where I would look for a hot name and cmputer get remote access.

  Hello

  Follow these steps to find the name of your computer:

  1. open system by clicking the Start button, click Control Panel, clicking system and Maintenance, and then click System.
  2. under name computer, domain, and workgroup settings, you can find your computer name and the full name of the computer if your computer
  is in a domain.

  Refer to this link for help:

  The name of your computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-your-computer-name

  You can also visit these links for more information about the remote desktop connection:

  Connect to another computer using Remote Desktop connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  Remote Desktop connection: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to find the audio and recording mixers

  Cannot find Audio Mixers and recording in Windows 7 as I had XP

  My Medion computer purchased recently does not appear to have full audio mixer for volumes or a similar mixer to record levels as I have already in Win XP.

  Is it possible to reproduce pages of mixer teas? I would be grateful for any help on this problem.

  TIA Mike

  Cool Edit 2000 (compatibility issue)

  Hello

  The mixer similar to that of Windows XP volume has been removed in Windows 7.

  Windows 7 has its own volume mixer. Check this link for more information:

  Adjust the sound level on your computer:
  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  Cool edit 2000 is not compatible with Windows 7. Cool Edit was taken over by Adobe, a few years ago and renamed Adobe Audition. The manufacturer
  offers a paid upgrade to the software.

  Check this link for more information:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=cool%20Edit%20PRO&v=Adobe&UID=2&pf=0&PI=
  6 & s = Cool % 20Edit % 202000 & os 32-bit =

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to find the object and remove from the WordPress site.

  There is a search form that appear on each page. It is just below the entrance by the WP user content for each page.

  I've been using Firebug in Firefox and I can see the code it puts in Firebug, but I can't find the source file so that I can change the code using DW to remove this search form.

  Please help if you can.

  I found it. It is searchform.php and she is called to sidebar.php where the other widgets are called from.

  I hope this helps someone else.

  Thanks for your help Nancy OShea

• How to find the numbers and make it more 1

  Hello world

  I want to find a group of numbers in my selection, and then do it + 1

  for example:

  elderly (\d\d)

  I want to do is + 1

  and

  201 (\d)

  I want to do is + 1

  What is the syntax?

  Thank you

  VK

  Hi, VK,.

  Try this. It looks up the number in the selection and added, for example, finds it "(20) years", "201 (2)" and will replace it for "elderly (21)", 201 3 respectively.

  var _selection = app.selection[0];
  app.findGrepPreferences = changeGrepPreferences = null;
  app.findGrepPreferences.findWhat = "(aged) (\\(\\d\\d\\))";
  var found = app.selection[0].findGrep();
  for(var i=0;i
  Kind regards
  Cognet
  		   

• How to find the Date and the time of Installation of Oracle on Windows?

  Hello
  
  Is it possible to find the installation Date and time of Oracle on Windows?
  
  
  Concerning
  Rajesh

  If you have never recreated/restored/reincarnated the database, then COLUMN of v database $ should tell you when you created the database.

  If you are looking for the time of installing Oracle home, check the logs under OraInventory.

  Reply by Satish sir at the following link:
  installation of a database date/time!

  HTH
  Girish Sharma

• How to find the maximum value in a collection

  Hi all
  
  I'm using Oracle 11 g 2. I need to know the maximum value in a collection of items.
  
  When I run the following, I get the maximum number of collection as '5' but I need the max value itself which is 8, please help.
  
  
  DECLARE
  type v_number1 is table of number of directory indexes;
  
  v_number v_number1;
  
  IDX NUMBER.
  psrc_file VARCHAR2 (10): = '1,2,4,8,6';
  v_src_file_string_array v_number1;
  number of max_temp;
  
  BEGIN
  
  SELECT regexp_substr (psrc_file, "[^,] +', 1, level") coll
  LOOSE COLLECTION v_src_file_string_array
  FROM (SELECT psrc_file FROM dual)
  CONNECTION OF LEVEL < = length (regexp_replace (psrc_file, "[^,] +")) + 1;
  
  -Set up some test values:
  BECAUSE me IN v_src_file_string_array. FIRST... v_src_file_string_array. COUNTING LOOP
  -v_numbers (i): = v_src_file_string_array (i);
  v_number (i): = i;
  END LOOP;
  
  max_temp: = v_number (v_number.first);
  IDX: = v_number.first;
  
  -Display the contents of the table:
  While the idx is not null
  loop
  If (idx) v_number > = max_temp
  then
  max_temp: = v_number (idx);
  end if;
  
  IDX: = v_number.next (idx);
  end loop;
  
  dbms_output.put_line ('Max: ' | max_temp);
  end;
  /
  
  
  Thank you!

  Harinath Arasu says:
  Hi all

  I'm using Oracle 11 g 2. I need to know the maximum value in a collection of items.

  When I run the following, I get the maximum number of collection as '5' but I need the max value itself which is 8, please help.

  DECLARE
  type v_number1 is table of number of directory indexes;

  v_number v_number1;

  IDX NUMBER.
  psrc_file VARCHAR2 (10): = '1,2,4,8,6';
  v_src_file_string_array v_number1;
  number of max_temp;

  BEGIN

  SELECT regexp_substr (psrc_file, "[^,] +', 1, level") coll
  LOOSE COLLECTION v_src_file_string_array
  FROM (SELECT psrc_file FROM dual)
  CONNECT BY LEVEL<= length(regexp_replace(psrc_file,="" '[^,]+'))="" +="">

  -Set up some test values:
  BECAUSE me IN v_src_file_string_array. FIRST... v_src_file_string_array. COUNTING LOOP

  It should be-online 1... v_src_file_string_array. COUNTY

  -v_numbers (i): = v_src_file_string_array (i);
  v_number (i): = i;

  This should be-online v_numbers (i): = v_src_file_string_array (i);

  Can't do you all just...

  DECLARE
       type v_number1 is table of number index by binary_integer;
       v_number v_number1;
       idx NUMBER;
       psrc_file VARCHAR2(10) := '1,2,4,8,6';
       v_src_file_string_array v_number1;
       max_temp number;
  BEGIN
       SELECT regexp_substr(psrc_file, '[^,]+', 1, level) coll
       BULK COLLECT INTO v_src_file_string_array
       FROM (SELECT psrc_file FROM dual)
       CONNECT BY LEVEL <= length(regexp_replace(psrc_file, '[^,]+')) + 1;
  
       FOR i IN 1..v_src_file_string_array.COUNT LOOP
         if max_temp is null or
                  v_src_file_string_array(i) > max_temp then
              max_temp := v_src_file_string_array(i);
            end if;
       END LOOP;
       dbms_output.put_line ('Max: ' || max_temp);
  end;
  

  Or more simply...

  DECLARE
       type v_number1 is table of number index by binary_integer;
       v_number v_number1;
       idx NUMBER;
       psrc_file VARCHAR2(10) := '1,2,4,8,6';
       v_src_file_string_array v_number1;
       max_temp number;
  BEGIN
           SELECT to_number(regexp_substr(psrc_file, '[^,]+', 1, level))
        BULK COLLECT INTO v_src_file_string_array
           FROM (SELECT psrc_file FROM dual)
                CONNECT BY LEVEL <= length(regexp_replace(psrc_file, '[^,]+')) + 1
           order by 1 desc;
       dbms_output.put_line ('Max: ' || v_src_file_string_array(1));
  end;
  

  Published by: JAC on April 3, 2013 18:56
  Unhandled exception...