How to get out of a while loop?

Similar Questions

• How to get out of a loop of 2 different conditions

  Hello Experts
  
  I'm writing a procedure in which I take the PROVINCE as an input parameter. All provinces are stores in a table. I use a cursor variable and rowtype to control the province. After I find province I displays its code and province. Everything works very well wait for me if I can't find the province. I don't know how to get out of the loop, if I can't find the province. I already use the output when the condition. I was expecting another condition should function and must break out of the loop, but it doesn't. Can you please someone show me how to get out if I can't find the province in the table through the cursor.
  
  Here is my code
  
  Set serveroutput on
  variable G_TAX varchar2 (10)
  CREATE OR REPLACE PROCEDURE p_create (i_state VARCHAR2) is
  CURSOR cur_bb_tax is
  Select * from bb_tax;
  bb_tax_details bb_tax % rowtype;
  Start
  If it is cur_bb_tax % isopen then
  Open cur_bb_tax;
  end if;
  loop
  extract the cur_bb_tax in bb_tax_details;
  If (bb_tax_details.state = i_state) then
  dbms_output.put_line (bb_tax_details. State | bb_tax_details.idstate);
  end if;
  When the output bb_tax_details.state = i_state;
  end loop;
  close cur_bb_tax;
  
  exception
  while others then
  dbms_output.put_line (SQLERRM);
  end;
  
  Thanks in advance

  ....
  loop
  extract the cur_bb_tax in bb_tax_details;

  IF (cur_bb_tax%notfound) then  exit;END IF;
  

  If (bb_tax_details.state = i_state) then
  dbms_output.put_line (bb_tax_details. State | bb_tax_details.idstate);
  end if;
  ....

  SIM

• How to get out computer safemode?

  How to get out computer safemode, troubleshooting says to many programs open in the start menu

  Hi kristi,.

  First of all, to deal with the programs at startup, click on start / all programs / accessories / run and type msconfig.exe, and then enter.  Go to the Startup tab and uncheck everything what you don't need from start (most is not necessary, but simply useful, but if not checked periodically it can accumulate over time).  You need your antimalware program and virtually all the rest of the list is optional (but some may be required for your system, so be a little careful, but if you uncheck something you really need and find out later, you can always go back and check again isn't a big concern). This only in the start, for now tab.  Click OK when finished.

  Now, to go out to start in safe mode, while remaining in msconfig, go to the Startup tab and uncheck the box Mode safe if it is checked.  If this isn't the case, then what you deleted should if all goes well do the trick.  When I did that the first time, I have removed more than 90% of what was there and there was no effect on me whatsoever - and not only the startup and shutdown to happen more quickly, but my computer run faster while working as well and the Task Manager showed a dramatic drop in CPU utilization and memory.

  Restart now.

  When you first restart, you get a screen asking you how you want to start.  Choose the Normal Boot or Normal Mode or something like that, said like that (NOT Mode without failure or something).  You need to start normally and this should solve the problem.

  If this does not work, then come back and tell me your exact version of Windows (32-bit Vista Business SP2 - and Yes, much more in detail) and we will try a clean boot troubleshooting procedure to try to find the culprits causing the problem - but I hope it won't be necessary.

  I hope this helps.

  Good luck!

• To break out of the while loop (1)

  Hi all

  I have a simple question that if a callback to a command button function, I use a (bLoop) While
  loop, where bLoop is a boolean variable has the value TRUE, then how can I break up or out of this while loop by using a control on the façade, which released the while loop by setting bLoop = FALSE.

  I tried, but it didn't come out

  The problem here is that the CVI normally only runs a reminder at a time. While you are in snooze control, no treatment of GUI and subsequent calls to other reminders usually occurs.

  You can try the following approach-, but it's not really the best method:

  While (b_loop) {/ / within a reminder}

  ... / / Do your tight loop

  ProcessSystemEvents ();   Force the CVI to see if all the GUI needs maintenance controls

  }

  If you have a reminder of different control to erase the global b_loop, this packing approach might work for you.

  You must use this technique for very simple programs - it can quickly escape out of control and in the end upward in a mess if you're not careful. OR recommend that you use not ProcessSystemEvents() within a point of order.

  JR

• I have a new laptop and I am a newbie on the laptop. I inserted a cd but now how to get out? Of course it is obvious on the desktop what do, but not on laptop.

  I have a new laptop and I am a newbie on the laptop. I inserted a cd but now how to get out? Of course it is obvious on the desktop what do, but not on laptop.

  Well, no, actually, I talked to someone at Microsoft and he discovered for me. The answer is the keyboard on the top right of my keyboard and the third button on the end. Worked like magic.     Thanks again!

• I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

  I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

  Hello

  The unit just has USB slide out. If it is stuck, consult with a real computer store (the one that makes
  his own service in the House and not leeks and glances at a Best Buy or other stores) or gateway
  supported.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to get out the mode safe mode with msconfig.

  I'm working on my computer and need to start in safe mode. I ran the msconfig and reboot the laptop. I get to the login screen, but when I get my username and password it tells me that the user name and password is not correct. How to get out the mode safe mode with msconfig.

  When you run msconfig to get set to Safe Mode, you just activate/check the option/SafeBoot at startup. INI tab or did you do something else?

  There is some malware that if you use the/SafeBoot option, you will not be able to use your system again until you remove the switch/SafeBoot the boot.ini for you can boot normally.

  Maybe it's not your exact problem, but I will never suggest to anyone to use the option / SafeBoot never again - too risky when troubleshooting since you can always start new or will never connect again until you remove the switch/SafeBoot.

  Anywho, if that's what you have done, you can start in the XP Recovery Console and then either make a new boot.ini file containing the switch/SafeBoot or simply rename the boot.ini file, you have something like boot.ini.old if you don't have a boot.ini file (I know it seems like a weird idea).

  In a single partition configuration, XP is not even a file boot.ini to boot.  XP will complain if there is no boot.ini file, but will always start very well without one (non-believers - try it!).

  After you get booted up and logged in, you can rename boot.ini.old in boot.ini and run msconfig to remove the option/SafeBoot, and never use it again.

• I had a virus that says that the FBI caught me downloaded inlegal stuff a fine of 72 hours or there would be charges pressed against me and I don't know how it get out!

  I had a virus that says that the FBI caught me downloaded inlegal stuff a fine of 72 hours or there would be charges pressed against me and I don't know how it get out!  Whenever I turn on my computer it pops up and I can't do anything! Sometimes I can go and get online! If anyone knows how to remove it please help me!

  What you are investigating your pc with?  What anti virus?

  Some malware knows how to avoid the standard as applications McAffee, Norton and Kaspersky, Avast.

  To be absolutely sure, you may have to reset it to the factory or clean install.  Make sure that you have a backup first.

• How to get out of the UiApplication?

  Hello!

  Can u tell me pls, how to get out of the UiApplication. The deactivate method is sufficient for this.

  PLS, suggest me-

  System.Exit (0). Or close the last screen and call the application itself.

  Disable does something different:
  public void deactivate()
  Handles finishing event.

  The system calls this method when sending of this request in the background. By default, this method does nothing. Override this method to perform additional when processing sent in the background.

• cartridges won't come out, says paper jam, how to get out of cartridges without killing printer.?

  cartridges aren't coming out,

  says paper jam, no paper in the printer,

  How to get out the cartridges without killing printer.?

  I did the thing video together 3 times and still won't come out? I'll call hp remote and hope they can fix it thank you

• How to get out with renaming a file every time that I change it?

  How to get out with renaming a file every time that I change it?

  Since the last update, I have more the possibility to combine files. How can I recover this feature

  10 pro version

  For the first issue: disable the preview pane in Windows Explorer.

  Wednesday, July 15, 2015 to 18:46, keithf52379832 [email protected]>

• Is there a way to re set Lightroom to the original settings, I've been playing with it and got somewhere that I don't know how to get out of... not particularly computer savvu

  Is there a way to re set Lightroom to the original settings, I was playing with it and has gotten, somewhere, I don't know how to get out of. Not very computer savvy

  For starters, stop Lightroom

  On Windows, do the following

  Click the Windows Start button and in the search box type: -.

  %AppData%\adobe\lightroom

  Then press Return\Enter

  This will take you to the folder Lightroom (see image below)

  Select the Preferences folder and click on delete to send it to the Recycle Bin.

  Close the Lightroom folder, and re-start the Lightroom program.

  

• How to get out of the callback function key before it complete the LabwindowsCVI

  Hi all

  In my program I use the command button (called SCAN) to analyze the setting on the serial port. When I press SCAN button callback fuction starts to send command on the series for the scan on the serial port setting. There are 99 order send and read. It takes about 3 minutes. It works very well. Now, I want to stop scanning and exit the callback function that is called by the button SCAN. Now when I press the SCAN button that it completes all 99 recommend and control then come to the interface user. So I'm not able to stop and get out of this loop. Y at - it a why to exit this loop if the user wants to get out? otherwise it will finish the scan.

  -Vishnu

  Hello

  I'll give you 3 options:

  1. If you want to go programaticly you can use simple break when stopping 'event' occur.

  2. If you want to go with a Cancel button, you can use this post:

  http://forums.NI.com/T5/LabWindows-CVI/few-general-CVI-questions-how-the-compiler-works/m-p/1440984

  where I already asked that it is not the recommended option for the panels.

  3. the best option is to use the multi threading separate each button in thread...

• How to pause and resume a while loop with a button

  Hi all!

  I'm back in LabVIEW, after only a few years and I cannot understand, what at first sight seems to be a simple problem!

  All I want to do is have a while loop in which, for the purposes of illustration, I have the 'random number from 0-1' function on the inside, and I want to be able to pause and resume this help from a button. There are a few other posts on the forum that are very similar and do use "event structures. The problem I encounter is that I can get the genarator random number to start the generation but the break will not stop this!

  I have the feeling that I made a stupid mistake - but I can't understand or google my way out the problem! I enclose my solution so far!

  See you soon!

  I did an example (you can drag and drop the image into a labview diagram > = 2014)

  hope this helps (I just did 2 excerpts, it's the same program)

  

  

• Get the data of while loop!

  Ladies and gentlemen,

  I am new to Labview, and I have many doubts!

  But now I need a help of a simple question!

  

  I need to get a Boolean status within a while loop and together a status outputs digital DAQ, but as I read in this forum, is impossible to use a tunnel to do that!

  I tried to use a LOCAL VARIABLE, but I think that I don't know how to use it!

  Please, check the photo and help me if possible... How can I get the status in real time of the Boolean (saida)?

  Thank you!

  Use a single loop that continues to turn and place all the code, including the output of data acquisition on the inside (why use separate loops if all run at the same rate?).

  To better help, fix the real VI instead of an image. What are the typical values for MP1... MP3? What is the significance of the division by one?

  You could also write simple lines after each loop, remove the dependecy of table built, data which cannot be done once all loops have ceased.

  (I also would not use one of these weird case of departure strutures.) Is there a while looping around it or you use "continuous operation"?)