How to get the Caller ID of the SIM card?
Hello
Can I get the SIM card or in any other way caller ID. ?
anyone has an idea about this. Please give suggestion/Reference / code for this example.
Thank you.
Narendra
the two abbreviations are words smart cards related:
Application Protocol Data Unit allows you to communicate with a card chip.
Java Card Remote Method Invocation is the communication unit between a smartcard reader and a smart card.
they can be used only to communicate with applications on a sim card.
Source:
http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=29144
Tags: BlackBerry Developers
Similar Questions
-
How to use the sim card that comes with my thinkpad tablet 3G version?
I got my tablet from newegg and my Tablet comes with a sim card AT & T, how to use this map? I have to go to the AT & T sign a contract and activate store? I'm in the United States
Thank you!At & t will put you on a laptop data plan which is more expensive than a plan of "ipad." If you can, find an IMEI of an Ipad and use the sim card number and the IMEI number of the Ipad for you sign up for a plan of cost reduction. Call them to implement. Using an online form or walk into a store At & t will be very frustrating.
PS: it is there no contract that your device is not supported by anyone - you own. It will be a month of service. If you don't sign up, free of charge.
What, the bonus is a kick butt gps integrated 3G wwan card. Enjoy!
-
How to insert the SIM card into the flame
Hello
I'm trying to put my SIM card in a phone of flame, but I don't know how to do it.
I try to place the card in the slot, but the slot is higher than the card, I do not know if I put the card good or bad. The message still says "SIM not detected." Can I restart the device every time I slightly move the SIM card to force recognition?
I have to do something else with the SIM card?PS: The flame brochure says in 2 different places ("see Insert or remove the SIM card '), but this article does not appear in the brochure.
Hi xabitubbi,
No, the flame device uses a SIM to normal size. Yours is a micro-SIM.
You should contact your operator and ask for a normal size SIM card that fits on the device of the flame.
-Ralph
-
Beginner wx345 how to remove the sim card
Once I deleted block I see sim. a video utube about the abduction. no joy. asfraid I'll break all restraint, which I think is present to keep sim in. or he did often another non-smart telephone it is odd in some ways seems designed for very untech people which makes it more difficult to ACTIVATE for me lol.
Hi John,.
to REMOVE the SIM card
it slides right in the WX345
the metal support is stopped (it does not flip open)
-
How to get the graphics card Intel HD to Satellite C660?
Anyone know how to get graphics Intel HD for a Satellite C660-1JH PSC0LE please?
Hello
You have the Satellite C660-1JH?
This laptop supports the Mobile Intel GL40 Express Chipset
The Intel driver should be available on the Toshiba driver page as well as on the Intel driver support site.On the Intel page, you will find the driver looking for Mobile Intel 4 Series express chipset family:
https://Downloadcenter.Intel.com/product/81507 -
travel in Germany - get the sim card from a local carrier?
I bought the air ipad 2 because supposedly I can just Exchange the Apple SIM with a local carrier prepaid sim card.
Support and I was told I had to buy a new sim card Apple!
Does anyone have experience with this?
Thank you
with the apple sim card, you can activate a German carrier. How long stay on Germany?
Steve
-
My started first by delaying to answer when I dial phone numbers, then reboot, followed by zero communications incoming/outgoing... now I have a massage "SIM card is from an unknown source" and a big red cross for the unknown below error signal... I've updated to 10.2.1.2977. No solution, what do I do?
Call your carrier and ask them to check and reset the settings from your Sim Card.
-
How to install the SIM card in the modem GSM G TravelMate 8473?
I bought the Acer Travelmate 8473 G laptop computer 2434G50Mnkk that comes with the modem Huawei GSM. I can't find a clue on where you want to insert a SIM card. Could someone help me with this information?
I think that the slot is visible after taking the battery.
-
HP 9470 m Ultrabook, Win8 - how to get the 3G connection?
Hello
I got a Ultrabook 9470 m of work with Win7 installed. Everything works, cool, but I wated Win8 (64 bit) for my own stuff. So, I installed Win8 (dual-boot) for my use personal. Of course, I have no HP drives or whatever it is. -No worries, I found all drivers for Win8-64 in this site ok. And now everything is recognized correctly.
But I don't know how to get the 3G card to connect. On Win7 HP connection manager takes care of that. But there is no connection manager for Win8. And google results only direct me to choose the network in the bar 'charm '. Great, but there are only available WiFis appear...
... --- ...
Well, I finally got this resolved. -As usual, it'S just a driver issue, as always with Windows... I suppose that there is nothing new under the stars.
In any case. Thanks for Cloud_Strider to point to the firmware upgrade. I did, but it alone did not help. BUT I don't know if it was still a part of the solution. So, thank you!
Unfortunately, Ericsson or Navatel drivers broadband did the trick. -It's the only ounces available on the site of HP support for this laptop. = (Fortunately, I had (finally) look in Device Manager to see what drivers are installed. Seems that this braodband card is a HP un2430. Looking for these drivers for WIndows 8 on Google showed me finally good page on HP which she link to fresh (from March 2013) drivers for this card.
After removing the old drivers (+ restart) and new (+ reset) installation, broadband is now available. I now write this with happiness through 3 G connection. =)
-
Original title: sim set up
I have acquired a dell inspiron duo and have place the sim card in the back according to the instructions, but can't make it work
Hello
You can buy a WWAN card to use a SIM card. You should also call your mobile service provider and check with them.
Similar question has already spoken here: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/how-to-make-the-sim-card-work-in-studio-15-dell/4507610a-e4aa-4bfd-9e94-ed71a60ad550
-
Portege R500 with 3G - Instructions for the insertion of the SIM card
I have a model PPR50E R500 which I think has built in 3G. Howevere I can't find documentation on how to insert a SIM card. One of the other model seems to suggest that the SIM card is inserted behind the keyboard. Can someone point me to some training documents please?
Unfortunately there is no documentation available. (Maybe in the user manual, but if there is nothing, then you won´t find anything)
Here are some instructions on how to swap the SIM card on a Portégé R400, so I think that since both machines are quite similar, that the guidelines would apply to the R500 too:
Perform the following steps to insert/remove the SIM card:
1. close the machine OFF completely. Make sure that the POWER LED is not lit.
2. remove the AC adapter, battery and all connected cables/devices.
3. open the screen.
4. remove the keyboard cover with a small screwdriver flat blade in the small hole on the edge of the cover and pulling gently out.
5. remove the two screws that hold the keyboard and knock it gently over the keyboard. (Use a small cross-slot screwdriver to unscrew the two screws).
6. to activate the keyboard down, take the upper end of the keyboard, pull gently upwards and place the keyboard with the keys down on the palmrest of your machine.* ATTENTION: *.
{color: #ff0000} + do not touch the keys on the keyboard to return back. Make sure that you hold the keyboard on both sides and ask gently down on the palmrest. +
+ The keyboard is connected to the machine with a flat cable. Avoid pulling the cable on the connector or damage! +
+ Avoid dropping objects (such as paper clips, etc.) inside the machine. A metallic object can cause a short circuit on the motherboard, which would cause serious damage to your machine. +
{color}7. search the card slot SIM on the upper right corner of the machine.
8. slide the locking mechanism of the SIM card with the fingernails or a small object slot to the left to unlock. (You can also use a small flat blade screwdriver)
9 pull gently until on the SIM card slot.
(10 a) Insertion: insert the card into the SIM card slot. The filings of the SIM card must show an upside.
(b) removal: remove the SIM card from the slot11 turn the slot down and block it by sliding the lock to the right.
12 insert the keyboard by placing the clips on the bottom of the keyboard into the grooves on the top of the palm rest. Rabat the keyboard gently downwards and fix it by screwing the screws into the holes. Make sure that no screws were dropped on the inside of the machine!
13 install the support of keyboard on its position and push down to fix its position.
14 attach the adapter sector, battery and all cables/devices.
15 enable you wireless device by pressing "FN + F8" when you work on Windows.* I must warn you, it s on your own risk and if you do not feel comfortable with the installation procedure can put the machine to an authorized Service provider, which can make the installation of the SIM card for you.*
Good luck my friend :)
-
I built an application of web service in Jdeveloper 11.1.1.7 to be used by other clients. Just the General steps as follows (Server web service Application is generated--> deployed on the server-> used by clients with the location of the WSDL file).
Now, I met a requirement where I need to get the port number and IP address for the client.
Questions :
How to get the IP address of the calling client to the web service application generated in Jdeveloper?
Commune technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology use to built web service application?
The common technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology allows built web service application?
It depends on the option selected during the creation of web services (if I remember correctly, there are several options, style J2EE 1.4 RPC style JavaEE JAX - WS 1.5,...)
For example, to get the ip address of the compatible with jax - ws web service, you need to inject the context in your service class with:
@Resource WebServiceContext wsContext;
and then inside your method:
MessageContext mc = wsContext.getMessageContext(); HttpServletRequest req = (HttpServletRequest)mc.get(MessageContext.SERVLET_REQUEST); String ip = req.getRemoteAddr();
Dario
-
How to get the webcam to work?
Hello
As I don't have a book of instruction for this computer, can someone tell me how to get the webcam to work please?
It is supposed to be something that appears on the side of the screen, but I left the sit of mouse here for centuries on all sides and nothing. Please help me.Kit_e
Hello
I agree with the user above. The user manual you can find on your computer because it s preinstalled.
The webcam, you can use with programs like Skype communication. You can make a video call with friends and they see the webcam image. ;)
-
How to get the Subvi (the virtual path is in .exe) reference in Run Time System
Hello world
The problem is how to get the reference of the Sub - VI in run time system, when the Subvi is in .exe after construction.
More details:
Top of page vi called the Subvi dynamically, so that the Subvi is always included, and the source object is the application.exe.
After the above configuration, the Sub - VI will be the application.exe. For example, the path of Subvi est...\application.exe\SubVI.vi
So, how to get the reference of the Subvi in Run Time System?
I can't do it when you use 'open reference VI' with le...\application.exe\SubVI.vi path in the run time system.
In fact, I can create a file to include the Subvi, rather than build the Subvi in application.exe, then I can get the convenintly reference. But this isn't my favourate average.
Thank you
chenyin
That is the problem. Call a Subvi dynamic means users could change, but it is also very attractive.
The dynamic call should be used in a user control, but some parade can avoid problems.
It depends on why you use dynamic calls...-online 2 main ways:
-Dynamic call are used to maintain a scalable framework for the code without acting on the executable file-online a single VI distribution managed by the administrator/developer
-Dynamic call are used to provide a collection of "external" characteristic that could be enriched by the administrator/developer. For example, you provide your customers a set of selectable custom signal filters in the executable.
In 2 cases, you are only able to assess the skills of the users to know if there is a risk of damage, if there is a change.
So to stay only master a parade might be to provide dynamic VI without a schema, but with the problem of maintenance, since no in-place editing and more attention to manage distribution.
Another way is to hide the actual distribution to user-online call dynamic VI but it without name as *.vi but others (a repellent name as system of OS name ) or simply without extension in order to attract not user... but that's debatable...
Another more difficult but more secure method is to create a consistency check before your routine (version, user, modified date,...)
-
How to get the length of the (playbook) video?
How to get the length of the video?
I need a maximum value for use with mmr_seek() or mmrenderer_event_get_position().
If you like in the file system on your PlayBook, you will see this:
/ pps/services/multimedia/converter/context.
There should be a directory with the name of the conext you use with mmrender. Under this directory the file called metadata. For an mp3 player, I see this:
[n]@metadata md_title_album::Sublime md_title_artist::Sublime md_title_bitrate::192000 md_title_comment:: md_title_duration::290812 md_title_genre::Alternative md_title_mediatype::4 md_title_name::Get Ready md_title_samplerate::44100 md_title_track::14 url::file:///accounts/1000/shared/music/Media Sync/Sublime/Sublime/Sublime - 1996 - Sublime - 14 - Get Ready.mp3
You could write a simple parser to get the data you need.
Maybe you are looking for
-
I've pinned a site earlier. I rebooted the computer later. When I opened firefox, I heard the music of the pinned site, but couldn't figure out how to see. How do it?
-
Satellite A100-233: can I use the WiFi for the Peer to Peer network?
HelloMe & my friend have Satellite A100-233, we cannot have network even see ourselves at the TOP unless we are in place contain the wireless Internet Modem.If we cannot make network peer-to-peer between us using WiFi? I hope you can help!Thank you
-
I have a Satellite pro 4600 about 3-4 years. I have a new fresh original battery. When I run the computer and recharge the battery the computer stops after 2 minutes. So I have to remove battery and load it later, when I use is not the computer.Someo
-
can I upgrade my iMac to lion elcapitan?
I am trying to improve lion 10.7.5 at elcapitan... of suggestions why it doesn't work?
-
Hi, I have my laptop computer daughter put in place with the Microsoft family and can see the amount of screen time she has. When he shows the days/hours it is on, it shows a deep blue bar. It has a feature of windows 10 HP. For some reason, some