How to get the count of logic?

Similar Questions

• How to get the count of UUTPassed and UUTFailed of c# ActiveX control

  Hello

  My operator interface use the TestStand ActiveX in c# control. I'll use the OP to a bench of EHR, which runs the same file in sequence. I would like to know the total UUT-tested, UUTPassed and UUTFailed count after each HAD tested. Is there built-in parameters does the work for me and how can I get it? If there is not, I have to create internal variables in c# to do the job.

  Thank you

  Kind regards

  No, there are no construction based on this. So either you have to implement something like this in on of the following:

  (a) the user interface

  (b) the SequenceFile (as long as it is not discharged in the meantime)

  (c) the process model

  (d) use an external tool for analysis

  If you already work with databases for reports, I suggest using d). If this isn't the case, you can choose. But change the process template is not recommended (if other, simple solutions are available), I would not recommend c).

  hope this helps,

  Norbert

• How to get the logical tab in the main area of 4.1.2 Data Modeler?

  I just installed Oracle Developer Data Modeler: Version 4.1.2.895.

  I was following section 2.1 development of the logic model

  http://docs.Oracle.com/CD/E48219_01/doc.40/e48205/tut_data_modeling.htm#DMDUG36169

  I used the example of library. I added the areas.

  Then I tried to create the books.

  The document says:

  1. In the main area (right) of the Data Modeler window, click the logical tab.
  2. Click the icon of the new entity.
     
     

  But I don't see the logical TAB on the right side at all.

  I see the Start Page. On the far right is the browser window. Basically, I see Messages - Log.

  On the left side, I have the browser window.

  Can someone tell me please how to get the logical TAB in the main area?

  Thanks in advance.

  Hello!

  In the browser with the right button on the logic model and select view.

  I hope this helps!

  Heli

• How to get the logical CPUs on host VMware in c#

  I need to get the number of logical processors with a VMware host, the number of processor sockets, and the number of cores per socket in a c# program.  I don't see this information in the HostSystem managed objects or all objects associated with it.  This information is displayed by the VMware Infrastructure Client tab in Configuration/hardware/processors, but I need to capture programmatically.  Thank you in advanced for your help.

  Take a look under HostSystem-> material for this information: http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.host.HardwareInfo.html

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• How to get the items on a loop at the same time during the execution of the loop for

  Hello

  I am a student. I would like to know how to get the outside loop counter values For in parallel so that the loop runs rather than obtaining the value finally outside the loop for future prospects for the answers.

  Thank you

  Frederick

  You already said yes, and you have said some of the different ways (registrants, locals, reference, queue, etc.). Since the information was provided to your request, the thread can be considered closed? If you want details about how to implement something, you must provide the details on what you are doing.

• How to get the timestamp to start at zero hours?

  Hello.

  I build software that records the values to Excel.

  The user can specify how long the test should run for, and the elapsed time should be defined as a string in hh: mm [:]

  The only problem is that the timestamp begins at 01:00 (calibrated 1904-number I guess). How can I get the count from 00:00:00, or perhaps to subtract the time at the beginning then it starts at zero.

  If you run the VI, you will understand what I mean.

  Thank you!

  Hi auto,.

  You must use relative time instead of absolute time - see the attachment...

• How to get the value of a variant as a string

  I have an existing codebase, which transmits the values of the user interface to business logic as variants. I was prompted to connect all values passed in this way in a text file. I'm trying to figure out how to get the data as a string to a Variant value without having to deal on the type for the data descriptor. The flag variant the fact, so I think I can, too.

  

  Anyone know how?

  Thank you, all! I decided to use the XML approach:

  

• How to get the maximum number of iterations in the property of TS

  I was put the loopType from one step to the count of success/failure. For example "stop after 1 iterations pass or a maximum of 3 iterations. The maximum iteration is 3. What my qustion is how to get the maximum iteration of TS property by codes of trial during the race. Thank you very much!

  Corey Chen

  The OPPO test developer

  Hello

  It may be a hack, but RunState.Step.LoopWhileExpression has information.  It will return a string like: "RunState.LoopIndex."< 69="" &&="" runstate.loopnumpassed=""><>

• How to get the number of entries in the navigation menu?

  

  How to get the number of entries in the navigation menu? Check the image. What it shows 8 number of customers and 10 products and 10 orders in the list. How to get it?

  --

  Thank you

  Hello

  Create items of the request saying, "CUSTOMERS", "PRODUCTS" and "ORDERS".

  Create the application process that defines these items when loading the page for example

  C1 in select count (*) NTC (of customer_table)

  loop

  : CUSTOMERS: = c1.cnt;

  end loop;

  C1 in select count (*) NTC (of products_table)

  loop

  PRODUCTS: = c1.cnt;

  end loop;

  C1 in select count (*) NTC (of orders_table)

  loop

  : ORDERS: = c1.cnt;

  end loop;

  Components shared Open-> Navigation bar and change:

  In the entry list Label-> customers & CLIENTS.]

• How to get the ip address of the data storage device

  Hi all

  I developed a project now and you need to distinguish a virtual machine is saved to the device local ESX or remote network storage device.

  I found the data store object in which the virtual machine resides by vi sdk, but could not find the address of the device that includes this data store.

  How to get the ip address of the coding data storage device, which includes the virtual machine? I need your help.

  Thank you in advance.

  How do you try to make a query. Storage devices provides a logic unit number no, there is no IP address for it.

  You can check the same for the storage on vCenter view

• How to get the parameters of the effect in the CEAP?

  Hi all

  I have a problem when I want to export the settings of the effect.

  (I checked the sample project "ProjDumper").

  Yellow: layer

  Red: one of the effect (text)

  Green: the parameters of the effect (I want to export these values).

  

  Here is my code:

          // 1. use a loop to find the "Text" effect
       // 2. get all the params from this effect
       A_long iL = 0;
       A_long jL = 0;
       A_long num_effectsL;
       A_long num_paramsL;
       A_char effect_nameC[30] = {'\0'};
       AEGP_StreamRefH streamH = NULL;
       AEGP_EffectRefH effectH = NULL;
       PF_ParamType            param_type;
       PF_ParamDefUnion        param_union;
       // Get number of effects on this layer
       ERR(Suites.EffectSuite2()->AEGP_GetLayerNumEffects(pLayerHandle, &num_effectsL));
  
       for (iL = 0; iL < num_effectsL; iL++) 
       {
            ERR(Suites.EffectSuite2()->AEGP_GetLayerEffectByIndex(g_PluginID, pLayerHandle, iL, &effectH));
            
            if (effectH) 
            {
                 AEGP_InstalledEffectKey     key;
  
                 ERR(Suites.EffectSuite2()->AEGP_GetInstalledKeyFromLayerEffect(effectH, &key));
                 ERR(Suites.EffectSuite2()->AEGP_GetEffectName(key, effect_nameC));
  
                 if (!strcmp(effect_nameC, "Text")) 
                 {
                      // Get number of effect parameters from Text effect
                      ERR(Suites.StreamSuite2()->AEGP_GetEffectNumParamStreams(effectH, &num_paramsL));
  
                      for (jL = 1; jL < num_paramsL; ++jL) // start at 1 to skip initial layer param
                      {          
                           ERR(Suites.EffectSuite3()->AEGP_GetEffectParamUnionByIndex(g_PluginID, effectH, jL, &param_type, &param_union));
                           switch (param_type)
                           {
                           case PF_Param_POPUP:
                                break;
                           case PF_Param_SLIDER:
                                break;
                           case PF_Param_COLOR:
                                break;
                           case PF_Param_CHECKBOX:
                                break;
                           default:
                                break;
                           }
                      }
                      ERR2(Suites.EffectSuite2()->AEGP_DisposeEffect(effectH));
  
                      break;
                 }
            }
       }
  

  In the SDK document, it indicates the value of PF_ParamDefUnion should not be used.

  So, how can I get these params in the effect, I put (the green line on the photo)?

  And, if there is any harm in my logic, please let me know.

  Thank you.

  > How do I know what setting is pop-menu, checkbox, or difficulty slider? (You can see the green line in the picture).

  I now just how to get the stream parameter type (type of AEGP_StreamVal: AEGP_OneDVal, AEGP_ColorVal etc.). Pop-up menu, checkbox or fix cursor parameter streams have the same type of workflow: AEGP_OneDVal.

  How to control parameter type you already posted in your code).

  > Shouldn't use a loop to get all the params?

  I also use this loop...

  > Could you please tell more in detail how to use it?

  I don't know what you want to do... I can't say more as written in the SDK.

• How to get the values separated by commas of multiple records in table

  How to get the values separated by commas of multiple records in table
  
  for example
  
  name address age sex
  a 12 m e
  b hh 12 f
  BB c 13 h
  
  I need to get output as a, b, c from a query

  Use the query as below he works for me, change the names of tables and columns

  SELECT SUBSTR (SYS_CONNECT_BY_PATH (PROXY_EMAIL, ','), 2) csv FROM (SELECT PROXY_EMAIL, ROW_NUMBER () ON the rn (ORDER OF PROXY_EMAIL), COUNT (*) NTC (STARS_PROXY_ASSIGNMENT) WHERE EMPLID = #EMPLID) WHERE rn = cnt START WITH rn = 1 CONNECT BY rn = rn + 1 ADVANCE

• How to get the date of end of week max and its rows of a table

  Hello
  

  Table [temp2]
   
     id          name        dt
    123        a             2-mar-2010
    124        b            1-feb-2010
    125        c             3-apr-2010
    123        a             13-mar-2010
    125        c             13-mar-2010
    123        a             12-feb-2010
   

  This table how to get this line by id - name (id and the name of the composite key) whose date is the date of last weekend (last Saturday).
  for example, suppose to have IDs 123 values date February 12, 2010, 13-mar-2010 this date falls on the last Saturday 13-mar-2010, how to get the value of the line on Saturday last for all the unique id and the name?
  
  So I wrote this but probably there a few traps...
  

  select id,name,dt from (select id,name,dt,max(dt) over(partition by id,name) as 
  max_date from temp2) t where dt=t.max_date and dt in ('3-apr-2010'
  ,'27-mar-2010','20-mar-2010','13-mar-2010')

  Here I have spent in the in clause 4 last weekend dates manually (although either has been calculated by programming) in front.
  Thank you

  Here's another option:

  SELECT     *
  FROM
  (
       SELECT     ID
       ,     NAME
       ,     MAX(CASE WHEN TO_CHAR(DT,'DY','NLS_DATE_LANGUAGE=ENGLISH') = 'SAT' THEN DT END) AS DT
       FROM     TEMP2
       GROUP BY ID, NAME
  )
  WHERE DT IS NOT NULL
  

  It is always useful to provide the following information:

  1. oracle version (SELECT * FROM V$ VERSION)
  2. examples of data in the form to CREATE / INSERT commands.
  3. expected results
  4 explanation of the expected results (alias "business logic")
  5. use.

   tags for #2 and #3. See FAQ (Link on top right side) for details.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
  

• How to get the text have the same effect as the video?

  Hello

  For the first time post here, but I wonder how to get the text of the titles have the same effect as the video behind her.

  For my video, I use 'bad tv' and other effects such as Gaussian that obviously changes the appearance of video, creating the look of VHS. However, I then inserted text via the title, but it normally appears. How can I make this text have the same effects as the video behind it?

  A friend told me I might need to add text to the video first, then do the effects, I have not tried, but wonder if there is an easier way, as this would require me to restart.

  EDIT: That's what I'm looking for. https://youtu.be/7_2PHQI89dI?t=24s The text has the same effect as the video.

  Thank you

  One way is to create a clip made up based on the title and the original clip. Then apply the effect.

  Another way is to use an adjustment layer.

  Good luck.

  Russ

• How to get the podcast of the website on the phone

  I was told to put that feed into the PODCASTING app on your iOS device.

  The site in question is https://randirhodes.com/how-to-get-the-podcast/

  I paid for a premium podcast, now how o I get this podcast to appear on my iphone 6 s more in the podcast app?

  Podcasts > select my Podcasts > press the '+' > Add Podcast > paste the URL that you got on the site.