How to get the cursor to change when rolled on an object?

Similar Questions

• How to get the new activation key when some numbers are taken away and you have received?

  How to get the new activation key when some numbers are taken away and you have received?

  Have a laptop with windows 7 from Dell. Need to re install W7. And I have some numbers are taken as a result of its use.
  How can I get a new code activation or my complete activation code?
  Best regards, W7 user

  How to get the new activation key when some numbers are taken away and you have received?

  
  Have a laptop with windows 7 from Dell. Need to re install W7. And I have some numbers are taken as a result of its use.

  How can I get a new code activation or my complete activation code?

  Dell provided you with restore/recovery media and/or a way to restore the machine 'default' as a key sequence?  If so - you won't need the number--unless they just sent a DVD of Windows 7 nu - and they are usually not unless you ask.

  They have probably installed using their key, which means that even with a utility like Belarc Advisor or ProduKey - you will not get the product key that matches the one on the sticker.

  Some may have you take several different digital pictures of the sticker from different angles and see if you can decipher the missing characters like that (you'd be surprised to see how that works).

• How to get the cursor to the first line after the addition of 3 rows in the OPS. Help, please.

  Hi Experts,

  I have a requirement to get the cursor should point to the first line instead of pointing to the third row. To the help of code below, my cursor points to the third row. Please put some light on it to reach the requirement

  XXCLKTestVOImpl vo = getXXCLKTestVO1();

  for (int i = 0; i < 3; i ++) {}

  Line = vo.createRow ();

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

  Thank you

  Gurnur Singh

  Problem is solved. Since then, I've been on 12.2.4 Ebs version and was auto insert false setting in AddtablerowBean. To reach the requirement, you will need to refer to the same number of lines to add the addtablerowbean property that you use in loop for. here I use 3 looping so you must use the number 3 lines to add the addtablerowbean property to get there. So whenever you add three rows then cursor in the first row of three lines you will add. Thank you all.

  Thank you

  Gurnur Singh

• How to get the best image quality when you insert PDF into Word?

  I am able to insert a PDF file as an object in Word, but the image quality is a bit fuzzy.  Is this what I can adjust in order to improve the clarity of the image in Word?

  You can try to extract the images with the help of extract all Images or select only the parameters of the screen recording you get when you save in a DOC, but I think that the general result is that the image recorded with the same resolution as shown in the PDF document. It may be that you simply adjust your screen in WORD. You can look at the picture in WORD and see if it is used at 100% or some other resolution. Bitmaps are not very forgiving if the resolution is changed to the document and not as something other than the small number of fractions of resolution appears change.

• How to get the cursor hand on Menu items?

  I want the cursor hand on menu items. I can get the main menu but not on the dots cursor.

  Please help, thanks in advance.

  Atul

  Hello

  If you want handcursor on menuitems put these properties on the label of the menuitem.

  useHandCursor = true;
  buttonMode = true;
  mouseChildren = false;

  If this post answers your question or assistance, please mark it as such.

  Thank you

  Jean Claude Chari.S

• How to get the double mono audio when sending prelude Roughcut to Premiere Pro?

  Can someone please tell me how to send a first Assembly of first mono audio with dual prelude?

  I have pictures with dual mono audio.

  I did my first editing of subitems in prelude.

  I right click and choose send to Premiere Pro.

  In Premiere Pro, I get my complete clips and the sequence.

  The sequence is stereo, but I need it to be dual mono.

  
  

  I can right click and change the individual clips in Premiere Pro in mono, but they do not affect the sequence.

  I got mono preferences Premiere Pro to import audio data regardless of the source. This does not seem to do anything.

  I can't find anything as a prelude to double mono audio export.

  Help, please!

  HI -.

  The only way I found to do what you ask for is:

  1. prepare your Rough Cut in the prelude and send it to the first

  2. once in the first, I copied my audio track 1 audio (stereo) and copied in 2 Audio and Audio 3 (in duplicate)

  • Note: I had to create two additional audio tracks to the sequence in PR. I upgraded them.

  3. right click on the Audio 2 clip and select "Audio channels...". "in the context menu

  4 uncheck the RIGHT way - so all you have is the LEFT channel enabled for this audio track

  5. pass Audio 3 and repeat steps 3 + 4 above, but this time clear the RIGHT channel in the dialog box "Audio channels...". ».

  6. cut the Audio track 1

  I realize that it is a manual process. We hope to provide a better solution, go ahead - be able to modify dynamically the Audio settings of sequence for example would have toured here - but of course that option does not exist currently.

  Kind regards

  Michael

• How to get the attributes of node when you query the TQL via java API

  Hello

  I'm trying to pick up a hierarchy of IC using a TQL. I created a TQL on uCMDB and am now questioning him through the uCMDB java API. The TQL is simple and queires a hierarchy containing a Node (Server) containing the disks, file systems, interfaces and IP addresses.

  My code snippet is:

      UcmdbService ucmdbService = CMDBConnection.createCMDBService();
      TopologyQueryService queryService = ucmdbService.getTopologyQueryService();
      Topology topology = queryService.executeNamedQuery("BasicTopologyView");
      Collection allCIs = topology.getAllCIs();

      for (TopologyCI node : allCIs) {
               System.out.println("Node is " + node.getPropertyValue("display_label") + "(" +node.getId().getAsString() + ") ... " + node.getPropertyValue("display_label")
                       + " ... " + node.getPropertyValue("TenantOwner")+ " ... " + node.getPropertyValue("discovered_os_name"));
           }

  The output I get is

  The node is/usr (18de9fd759680f10b4f1d3567fb0f5e5)... / usr... null null
  The node is/tmp (18eaac5d8ec14e45874029f25011a13c)... / tmp... null null

  Whatever properties I question are coming as null. Is there a way I can say uCMDB what I expect from each node to the execution of the attributes.

  Thanks in advance.

  Peyrot

  This problem is now resolved. The correct way to proceed, queryProperties method is used when querying of the node.

  node.queryProperties(props);
  

  When the accessories is a string containing all of the appropriate properties you want to take to uCMDB.

• How to get the time limit requested when ping external interface FW IOS?

  After I install CBAC on an IOS Firewall Router and deny all incoming ICMP request, I ping the external interface of the router and I get "response from the (the external interface IP): the unreachable destination network. I think it's quite risky because my IP from the router's external interface is known. How can I set up such that I can get "Timeout asked" instead?

  Hello

  Try not to implement the "unreachable no ip" of your external interface.

  This command prevents the router ICMP unreachable sending at all.

• How to get the text to change with each image in the slideshow base

  Hi, I'm putting the different positions and text on three different images. When I saw the text just remains the same.  I tried to change individually, but it doesn't seem to work. I took images in Photoshop and make all the same size with compensation for the text to be included later in the Muse. Then I loaded the three images in the slide show and thumbnail to bring the image before and at the Center. But regardless I the title and text appear unchanged, even if the changes to the image.  I don't know what to do with the image and text together in Photoshop would do anything for type resolution when it was introduced to the Muse.  Any ideas please.  I enclose the schema where I wish to address three different types of job seeker.

  Hi brush them... you have checked the title text on your widget option?... Try again with different slidshows which shows the option.so of text you can add the text you want in each image/trigger...sorry my English and I hope to help you

• How to get the cursor of the keyboard on a specific area with a condition

  I use forms6i. I have two fields and Field2 1 field1. I want that when field1 = 'A' and slider keyboard then go into Field2 else it needs automatically the Field2. How is that possible?

  Hello

  Please post this question in the appropriate forum.
  This forum is intended for Oracle Application Express.
  The forum for Oracle Forms is:

  {forum: id = 82}

  Please do not post duplicate questions!

  Kind regards
  Kiran

• How to stop the slide duration change when stuck?

  (Adobe Captivate 5). I have a few thumbnails - sets of a few slides - I would like to integrate more than a presentation. In the original presentation, slide durations are all carefully defined, but when I copy and paste slides in another presentation, slide durations increase unnecessarily.

  Is there a way to prevent this free extension of the timeline and keep the original term?

  Thank you.

  Trevor

  Just another idea: have you tried to turn these slides into a model (you can just change the extension, most of the aspects will work) and start the other presentations with the model?

  Lilybiri

• How to get the max sequence number when some record exists in the database table

  Hello
  
  I need to create the sequence that he should leave value max already exists in the table.
  
  Example:
  I have a table as below:
  
  ID NAME
  1A
  1 a
  3 C
  4 D
  
  
  Now, during the creation of sequence it should start from 5 but I should ' t START WITH 5 hard-code in the sequence to create. Is it possible to do without Hardcoding the max value in the sequence. It automatically brings the value max + 1 for the next data when I insert.
  
  
  CREATE THE TEST_SEQ SEQUENCE. NEXTVAL
  START WITH [Max + 1 val of the table]
  MAXVALUE 9999999999999999999999999999
  MINVALUE 1
  NOCYCLE
  CACHE 20
  ALL;
  
  
  Thank you...
  
  Published by: 998976 on April 18, 2013 04:37
  
  Published by: 998976 on April 18, 2013 04:38

  Hello

  All the numbers in a CREATE SEQUENCE statement are literals; no other types of numeric expressions are allowed.
  You need dynamic SQL statements to do something like what you want. For example:

  COLUMN     seq_start_col     NEW_VALUE  seq_start
  
  SELECT     1 + MAX (val)     AS seq_start_col
  FROM     table_x;
  
  CCREATE SEQUENCE TEST_SEQ.NEXTVAL
  START WITH  &seq_start
  MAXVALUE 9999999999999999999999999999
  MINVALUE 1
  NOCYCLE
  CACHE 20
  NOORDER;
  

• How to get the days and months when two dates are given

  Hi all
  
  I have a requirement where I need to return the number of months and days between two given dates.
  I have no need to take account of the year as the difference in dates is always less than a year
  
  I have 28 June 2012 and January 31, 2013, as dates.
  
  I'm working on 10g
  
  When I select the double months_between(:a,:b) and provide the dates he gives me 7.09677
  I want to give only 7 months and 9 days, or what ever the exact days are.
  
  Your contributions are appreciated

  Try this:

  WITH t AS
  (SELECT TO_DATE('28-JUN-2012', 'DD-MON-YYYY') date1, TO_DATE('31-JAN-2013', 'DD-MON-YYYY') date2 FROM dual)
  SELECT TRUNC(MONTHS_BETWEEN(date2, date1)) months,
         date2 - ADD_MONTHS(date1, TRUNC(MONTHS_BETWEEN(date2, date1))) days
  FROM   t
  

• How to get the actual size of control?

  How to get the real size control when the preferred width/height is not defined but control have size which are automatically evaluated (for example contaier with the disposal of the battery)?

  Try the LayoutUpdateHandler: https://developer.blackberry.com/cascades/reference/bb__cascades__layoutupdatehandler.html

• How to get the event when we change our simcard in BB device

  Hi all

  Please, someone tell how to get the event or any listener method that can automatically called when we change our SIM card device.

  Thanks in advance,

  TEJ

  Hi Tej,

  I came across some post, which may be useful for you

  http://supportforums.BlackBerry.com/T5/Java-development/is-there-a-way-to-get-the-mobile-or-phone-nu...

  http://supportforums.BlackBerry.com/T5/Java-development/is-SIM-ID-really-exist/m-p/54407#M5954