How to get the name of model of the physical network adapter
I can see the template information for my network via vcenter card, but need help with registration this info for powercli.
for example, that I'm looking for my request to have this output:
"Broadcom Corporation NC370i Multifunction Gigabit Server adapt."
Hello, jstroehmann-
How about something like:
## get the .Net View objects for all of the host systemsGet-View -ViewType HostSystem -Property Name,Config.Network.Pnic,Hardware.PciDevice | %{ ## store pipeline variable for later use $viewHost = $_ ## for each PhysicalNic on the host, output a bit of info $viewHost.Config.Network.Pnic | Select @{n="HostName"; e={$viewHost.Name}},Device,MAC,@{n="NicDisplayName"; e={$oPNic = $_; ($viewHost.Hardware.PciDevice | ?{$_.Id -eq $oPNic.Pci}).DeviceName}}} | ft -auto
He catches the .net visualize the object of all the HostSystems, and then displays some info like hostname, VMNic name, its MAC address, then the full name you mentioned. You could, of course, something with the release other than send it to Format-Table. How does do for you?
Tags: VMware
Similar Questions
-
How to get the physical credit iTunes gift card?
How to get the physical gift card iTunes on your iTunes store account balance?
- You cannot buy an iTunes gift with in-store credit.
See the link below to buy physical gift cards for iTunes.
-
How to get the physical size of the screen?
Hi all
How to get the physical width and height of the screen (not resolution) in inches or in centimeters?
Is there a method to do
Thank you very much
Display.getWidth () and Display.getHeight () you will get the number of pixels.
Display.getHorizontalResolution (); and Display.getVerticalResolution () to get the pixels per meter. Then by dividing appropriately you can find the actual size.
-
How to get the physical channel for USB card as ENET
Hello
For my application (VB .NET, using NIDAQmx 8.8), I need to access the 2 cards:
a USB-6008 and an ENET9163.
I would like to read the physical channels automatically with this feature NI-DAQmx
Physicalchannel1ComboBox.items.AddRange (DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AI, PhysicalChannelAccess.External))
Unfortunately, he didn't get a single card at once.
When the USB card is connected, he read the physical channels of the USB card
When the USB adapter is not plugged in, it read the physical channels of the ENET card.
I hope someone can help me with this problem!
Thank you
RB
Hello RB.
To read from multiple channels, you can enter in the drop-down list box "Physical channel", the comma separated channels, custom channels or if you read physics, the string "DevX/Benjamin: Z", where X is the number of device, and X and are the first and the last channel you want to analyze (for example to read to ai0 to ai4 from your device 1 enter "Dev1 / ai0:4"). Among the names of your channels, I guess they are global channels created in MAX? You can always read channels multiple and different advice by separating the comma.
I hope this helps!
Kind regards
-
How to get the driver network card and on the use of the PowerCLI firmware version?
Hi all
I would like to know if anyone can help me in sharing the PowerCLI script to list the server NETWORK card driver and the firmware version?
Note: I use the HP Blade Server and it's manual ESX - CLI command output:
HP BL 465c G8 ~ # ethtool-i vmnic0 pilot: be2net version: 10.5.65.4 firmware version: 10.2.340.19 bus-info: 0000:04:00.0 HP BL 465c G7 ~ # ethtool-i vmnic0 pilot: be2net version: 10.2.293.0 firmware version: 4.9.416.7 bus-info: 0000:04:00.0 Any kind of help would be greatly appreciated.
Thank you.
PowerCLI Version
----------------
VMware vSphere PowerCLI 6.0 Release 2 build 3056836
---------------
Component versions
---------------
VMWare AutoDeploy PowerCLI component 6.0 build 2358282
VMWare ImageBuilder PowerCLI component 6.0 build 2358282
VMware vSphere PowerCLI component 6.0 build 3052101
It works for you?
$esxName = "MyEsx".
$esxcli = get-EsxCli - VMHost $esxName
$esxcli.network.nic.list () | %{
$esxcli.network.nic.get ($_.) Name) |
Select Name,
@{N = "Driver"; E={$_. DriverInfo.Driver}},
@{N = 'Version'; E={$_. DriverInfo.Version}},
@{N = 'Firmware Version'; E={$_. DriverInfo.FirmwareVersion}}
}
-
I can recover physical NIC details for the server HOST ESX, but MAC is empty... How can I get?
Thank you/HKS
$net = get-VMHostNetwork - VMHost myServer.domain.net
$net | FC
class VMHostNetworkInfoImpl
{
VMKernelGateway = 166.12.113.1
ConsoleGateway = 166.12.113.1
ConsoleGatewayDevice = vswif0
DnsAddress =
[
169.40.0.2
169.40.0.1
]
DnsFromDhcp = False
DnsDhcpDevice =
DomainName = domaine.net
Host name = hostname1
SearchDomain =
[
EU.hedani.NET
]
PhysicalNic =
[
class PhysicalNicImpl
{
BitRatePerSec = 1000
FullDuplex = True
WakeOnLanSupported =
ID = key - vim.host.PhysicalNic - vmnic0
DeviceName = vmnic0
Mac =
DhcpEnabled = False
IP =
SubnetMask =
}
class PhysicalNicImpl
{
BitRatePerSec = 0
FullDuplex = False
WakeOnLanSupported =
ID = key - vim.host.PhysicalNic - vmnic1
DeviceName = vmnic1
Mac =
DhcpEnabled = False
IP =
SubnetMask =
}
]
VirtualSwitch =
[
class VirtualSwitchImpl
{
Key = key - vim.host.VirtualSwitch - vSwitch0
Name = vSwitch0
NumPorts = 128
NumPortsAvailable = 105
NIC =
[
vmnic1
vmnic0
]
MTU =
}
class VirtualSwitchImpl
{
Key = key - vim.host.VirtualSwitch - vSwitch1
Name = vSwitch1
NumPorts = 64
NumPortsAvailable = 56
NIC =
MTU =
}
class VirtualSwitchImpl
{
Key = key - vim.host.VirtualSwitch - vSwitch2
Name = vSwitch2
NumPorts = 64
NumPortsAvailable = 64
NIC =
MTU =
}
]
ConsoleNic =
[
class HostConsoleVirtualNicImpl
{
PortGroupName = Service_Console_VLAN1
ID = key - vim.host.VirtualNic - vswif0
DeviceName = vswif0
Mac = 00:50:56:4 c: 1 d: 3B
DhcpEnabled = False
IP = 111.11.111.11
Subnet mask = 255.255.255.0
}
class HostConsoleVirtualNicImpl
{
PortGroupName = Service_Console_ISOL
ID = key - vim.host.VirtualNic - vswif1
DeviceName = vswif1
Mac = 00:50:56:4 d: 88:87
DhcpEnabled = False
IP = 10.0.0.241
Subnet mask = 255.255.255.0
}
]
VirtualNic =
[
class HostVMKernelVirtualNicImpl
{
VMotionEnabled = True
PortGroupName = Vmotion_VLAN1
ID = key - vim.host.VirtualNic - portgroup3
DeviceName = portgroup3
Mac = 00:50:56:65:04:56
DhcpEnabled = False
IP = 166.12.113.72
Subnet mask = 255.255.255.0
}
]
}
get-vmhost | % {(get-view $_.id).config.network.pnic} | select Device, Mac
-
Guest connection NIC mapped to the physical NETWORK adapter status
I would like to know if it is possible to map a guest NIC to a physical host NIC so when a cable is physically disconnected from the host my guest knows.
The new version of Workstation has this feature, but ESX did not yet.
-
Best way to make the physical NETWORK card->; vmnic number?
Is there a known way to understand the link between the vmnic0, vmnic1... logical names and their relationship to physical network cards of ESX/ESXi? In other words, if you get on a new server with, say, 6 physical ports and a config on one vmnic, how do you know which translates to correct physics?
The means that I can think of are:
Check the MAC address within vSphere Client, but then you must somehow know the MAC of the physical NETWORK adapter
check the number of PCI of vSphere Client, but this seems a bit difficult to understand?
fix pull cables and are looking for "plugged" or not.
So, how do you do this, if necessary?
In fact, it is quite easy to see which port on a teddy bear refers to things in the VMware environment...
Look under configuring the host tab/Server/network element equipment adapters... This will show each NIC and what vmnic # are assigned to the ports. It will also show the MAC address of each port. If they are assigned to vSwitches, it will also show this info...
You can also see the Networking section (still under the Configuration tab) to see the vmnic # assigned to each vSwitch...
Multiport NIC generally have markings on the plate PCI to let you know which is which... All you really need to know is what is the beginning of numbering.
VMware VCP4
Review the allocation of points for "useful" or "right" answers.
-
virtual network card to the physical network mapping and default loadbalancing
What Virtual Machine virtual network card is map physical NIC.
For example.
lets assume Vswitch1 on host1 esx dedicated for the network of the virtual machine (port group) and it has 6 cards network linked to it (vmnic1, vmnic2, vmnic0, vmnic3)
Load policy (default) Balancing - from the originating virtual port (it balances only outbound traffic through all the nic assigned to vswitch1 right?)
ESXi host1 <-Vswitch1 (the VM network) <---(vmnic 0-vmnic 3)
Lets assume that esxi hosting 6 virtual machines and each virtual machine has two network cards configured. Through some documents, come out of that when the virtual machine is running, it gets connected to the ports of availabe on virtual swicth. say, I turn on the virtual machine in the order VM1, VM2... VM6.
Vmname virtual adapter port on virtual switch1 Mapping of the physical network adapter
VM1 eth0, eth1 1.2 which mappeed of the physical NIC to eth0, eth1?
VM2 eth0,eth1 3,4 ?
VM3 eth0,eth1 5,6 ?
VM4 eth0,eth1 7,8 ?
VM5 eth0,eth1 9,10 ?
VM6 eth0,eth1 11,12 ?
Since we use load balancing based on the virtual port, can two virtual map of the same virtual machine are mapped to the two physical NETWORK card I want say eth0 VM1 is mapped to the (physical nic) VMNIC0, VM1 eth1 get connected VMNIC1 (physical nic).
It would be great if you could explain how the virtual network adapters are mapped to the physical NIC Y at - it a command or a script to the list NIC(of all vms hosted on esxi) virtual NETWORK adapter mappings physical in detail.
.
sansaran wrote:
Is there a way to know what virtual NIC to connect to which physical NIC
With the virtual NETWORK adapter, you hear the virtual card inside the VM? If if and when you use several VMNIC like you, there is no visibility in vCenter (usually vSwitches, we see with Distributed vSwitches).
However, you can use the command-line ESXTOP tool in the view 'n', for the connection between the virtual machines and the outgoing vmnic.
-
How to get the name of sbRIO programmatically
How to get the 'name' and 'Comment' by sbRIO I write to sbRIO-9602 Max in the box of Identification (model, serial number, MAC address, name)?
Use RT Information.vi of target is located under the range of public services under LabVIEW Realtime.
Christian
-
How to get the required column, the names of tables for the preparation of the report.
Based on the MD50 how to get the exact name, the table names he joined for report development. as I am new on this project and the purchase of failet for R12.
How can I start my approach to prepare the data for the report model? How can I search the database based on the respective diagrams of means?
all input appreciatedHello
You can find information about schema objects in eTRM Web site, you can also consult the documentation for product/module and see if it helps. If you already have any report (standard or custom), you can enable the trace and run the program to see which object it access or open the report using Report Designer and see the code.
ETRM Oracle
http://ETRM.Oracle.comOracle Applications documentation
http://www.Oracle.com/technology/documentation/applications.htmlKind regards
Hussein -
Hi all
Can I know how to get the bluetooth device name and the name of the bluetooth device address device class?
Example:-if my bluetooth device address is :-98:EB:CD:01:1F::90 then how do I get my bluetooth device name?
I hope you understand my problem. Let me know as soon as possible.
:
Thanks for the reply.
-
How to get the number and the name of the contacts selector
Hi all
I got the Contact Picker work but I have no idea how to get the selected telephone number and the name.
There are attributes that I can put like contactId.value () to retrieve or there is another way?
Thanks in advance.
ImageButton{ defaultImageSource: "asset:///images/bluebutton.png" onClicked: { contactPicker.open(); } attachedObjects: [ ContactPicker { id: contactPicker onContactSelected: { result.text = "You chose contact: " + contactId; } } ] } Label { id: result text: "You chose contact: " }
Hello
You can get the contact name and phone number as this,
ImageButton{ defaultImageSource: "asset:///images/bluebutton.png" onClicked: { contactPicker.open(); } attachedObjects: [ ContactPicker { id: contactPicker onContactSelected: { result.text = "You chose contact: " + contactId; // call a cpp method to get the details
app.getDetails(contactId); } } ] } Label { id: result text: "You chose contact: " }
the CPP code:
void ContactDetails(ContactId id) { Contact contact_info = m_contactService->contactDetails(id); QString firstName = contact_info.firstName(); QString lastname = contact_info.lastName(); QList
phoneno_list = contact_info.phoneNumbers(); QStringList no_s; foreach(ContactAttribute attr, phoneno_list) { no_s << attr.value(); } } You can get details like this.
Kind regards
Naresh Kodumuri.
-
How to get the device model, for example app works on PlayBoook or BlackBerry 10?
How to get the device model, for example app works on PlayBoook or BlackBerry 10?
You can use this class: http://goo.gl/GtMLP for information on devices
something like this:
String myDeviceModel = android.os.Build.MODEL; String myDeviceBrand = android.os.Build.BRAND; String myDeviceDevice = android.os.Build.DEVICE;
-
How to get the logical tab in the main area of 4.1.2 Data Modeler?
I just installed Oracle Developer Data Modeler: Version 4.1.2.895.
I was following section 2.1 development of the logic model
http://docs.Oracle.com/CD/E48219_01/doc.40/e48205/tut_data_modeling.htm#DMDUG36169
I used the example of library. I added the areas.
Then I tried to create the books.
The document says:
- In the main area (right) of the Data Modeler window, click the logical tab.
- Click the icon of the new entity.
But I don't see the logical TAB on the right side at all.
I see the Start Page. On the far right is the browser window. Basically, I see Messages - Log.
On the left side, I have the browser window.
Can someone tell me please how to get the logical TAB in the main area?
Thanks in advance.
Hello!
In the browser with the right button on the logic model and select view.
I hope this helps!
Heli
Maybe you are looking for
-
How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor
Hello How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor? Are there any adapter or cable that can help? Concerning M
-
HP Jet 11: I forgot my password Bios admistartor
I downloaded windows 10 and everything was fine, but in a few days it started to act up. I shut it down and restarted but it does not start. All this shows it's a loop of hp. I did a recovery drive and went to the bios Setup, but when I go to him he
-
Scanner Epson does not work in Windows 7
my epson nx230 scanner has stopped working with windows 7. I have uninstalled, reinstalled, loaded new drivers and nothing works. What should I do next?
-
Need help to choose rpms suitable for kernel 2.6.9 - 89.EL
Hi all;That's my goal of testing and learning.# cat/etc/redhat-releaseRelease of Red Hat Enterprise Linux AS 4 (Nahant update 8)# rpm - qa | grep oracleasm# uname - r2.6.9 - 89.ELI'm confuse download RPMS required to configure ASM.Oracle ASMLib downl
-
Creating cloud App, code error installation 205
Hellowhenever I tried to install the ACC, I had the same error code, which is the error code 205.How can I work around it?Liryal