How to grant access to a package body to another user in execution

Similar Questions

• How to grant access to secure with sending a 1 2 areas form

  How to grant access to secure with sending a 1 2 areas form? For any help or suggestion would be appreciated.

  If you change the zone-1 ID in the form action, it will return to the page and a default logon you connected. You have access to all areas will be saved in. Technically, you can connect even with no associate also area long have you a username and password.

• How to give subsidies on the packages belonged to another apps schema

  Hello
  
  Could you help me by giving subsidies on the packages belonged to another apps schema.
  
  to give the grant that we can use to either run or debug, but I'm not sure that him on the behaviour of this donation.
  
  (1) if I give subsidies to the parcel if it may harm data or objects associated with this object IE apps.
  
  The user who got grants on these packages if it executes this package - make changes in the environment.
  
  with respect,
  Surya
  
  Published by: SuryaSrinivas on June 30, 2009 02:31

  Hello

  I think that it should run no problem granting privilege on the packaging of custom schemas apps. However, you must give approval with cautious execute as account APPS is a powerful user and you need to know the implication to give privileges to other diagrams.

  Kind regards
  Hussein

• How to rename a table in the schema of another user

  Hello! How can I rename a table to another user? I'm sysdba. I can't recreate just, because it is very huge and it will take a lot of time to move data to the left and to the right.
  
  ALTER table make.orders rename make.orderhistory.

  My bad, how it works

  SQL>
  SQL> alter table maran.test1 rename to test2;
  alter table maran.test1 rename to test2
                                    *
  ERROR at line 1:
  ORA-00955: name is already used by an existing object
  
  SQL> alter table maran.test1 rename to test3;
  
  Table altered.
  

  To apologize

• How to grant access browserlabs on my staging site?

  Hello

  Is that someone else uses browserlabs to test a staging site?

  I need to allow the details of property intellectual laboratories of browser on our staging platform, however the two addresses (76.74.170.151and 76.74.145.191), provided in a previous thread do not work. These are public facing only and requests are sent fom a different IP address?

  Someone at - it any other ideas?

  See you soon

  Alan

  Hi Alan,

  My apologies for the delay. The engineer that I had to get in touch with was out of the office. Here's the outgoing IP: 216.104.220.193

  Please let me know how it works for you.

  Best regards

  Corey

• How to grant access to "My dashboard" to other users?

  Hello!
  
  Is it possible for someone else to see my dashboard 'my '?
  In responses, under Dashboards folder, I can see all other folders on the right, except "My dashboard" even if it appears in the browser window on the left.

  I can obviously not reason with you then this is what you want. I guess you will need to learn from your own experience that you don't want to listen to all the advice and take it as an insult.

  Using Catalog Manager go to the user folder you want to share, and change ownership recursively on the account that you are logged on Catalog Manager with. Change and recursively cascading permissions to add the other user/group who wants to see the user dashboard. After you've done will be able to refer to dashboard of the user with a URL like this (assuming that the dashboard page named page 1 according to the dashboard of the user by default):

  /Analytics/saw.dll? Dashboard&PortalPath=/users/user/_portal&page=page%201&action=navigate

• How to give access to a program downloaded to other users with constraints of family settings

  Hello

  I have a PC running Windows 8 with 3 user accounts: administrator (mine) and one for each of my two children. I put restrictions of family put on their accounts, so that they can access certain levels of games and/or ones I allow them to use.

  I bought and downloaded a game for them in the account administrator (Doodle God). I can play the game of my user account, but they can't have their profiles - they see only the free version of limited capacity, which came preloaded with the PC when we bought it. In addition, when I go to start their menus and click on all Applications, the full version does not appear in their profiles (it does on mine).

  I tried to adjust the parameters of family to see if I could give them access to that game especially (with the option that allows you to block or allow access to individual applications), but the game does not even appear in the list, so I can't allow to use it.

  Can you please help? It is not sensible that I should be uploading (and pay) for the game for each separate profile. At present, the only way they can play is if they are in my profile, which of course defeats the purpose consisting of all parameters of family.

  Thank you very much.

  Hi Marta,

  This issue may have caused due to the set up parental controls properly. I suggest you turn off parental control then set parental control and check if it helps.

  Step 1: Disable security for the family.

  How can I remove parental control?

  http://Windows.Microsoft.com/en-us/Windows-Live/Family-Safety-remove-uninstall-FAQ

  Note: refer to the section "to turn off the parental control on PC running Windows 8.1 analysis or Windows RT 8.1". ""

  Step 2: Turn on security for the family.

  Set up parental controls:

  http://Windows.Microsoft.com/en-us/Windows-8/create-child-account

  Note: refer to the section "enable parental controls for your child's account.

  For further reference, please see the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows-8/set-PC-limits

  http://Windows.Microsoft.com/en-AU/Windows/set-up-family-safety#set-up-family-safety=Windows-8

  Please reply with the status of the issue, so that we can better help you.

• How can I access my account without my password administrator user or a recovery disc? Help PLEEEEEEEEEEAAAAAAAAAAASSSE.

  Can I delete an administrator password, delete the account, or do anything else to give me permission to install the software & make changes? (Windows Vista, I am the administrator but do not have the password, or I made a recovery disk...) I reinstall of the operating system drive, but installation it did not help).  My ex-wife and I had this cpu for at least 4 years and never used to separate user profiles.  One night after work I got a pressing Bill to pay, went to the cpu and concluded that she had herself made administrator, password protected account and I couldn't.  Since I had to wake her up to get logged into his account, I decided to make my own account and to avoid future problems like this, I was administrator. After a certain period of time and a long divorce, I had no idea what was the password.  I have so many different passwords for work, my laptop, smartphone, different email accounts, and so on, not to mention that I almost never use that cpu, there is no way I will always remember this one. I have to leave my children (8.7. & 5) use this one similar and interactive learning. Well, I just bought their webcam $100 so they can make videos and other things, but now I can't install it because I lost my password. Genius, huh? If it's important, the unit is a GT5657E gateway. Service provider is Charter modem Cisco, Netgear router.

  Hello

  "(Je n'ai pas le disque de réinstallation dele de système d'exploitation mais installation il n'a pas aidé.)" "

  Reinstallation of the operating system removes the passwords that you start to 'fees' with a relocation back to new condition.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Events Notification service systems have failed. How can I fix this so I can connect another user account?

  I use my sisters computer and I can't log in as user. I created a user account for me, but still I can't get on this account. I use my sisters instead account and I get the Notification Service to event system does not start uopon after accessing his account. Also how to view the system event log? I'm not the best with the help of a computer, but I would not go on the internet and enjoy chatting with others. Thank you very much.

  Hello

  Do you receive an error message while logging in to your user account?

  Please follow the steps from the link below.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  http://support.Microsoft.com/kb/940765

• How to move my Acrobat DC license key to another user.

  Just a disconnect to the account that have the saved key and save the key to the other user does not work, and those support do not have any idea as usual.

  I just need cancel the registration of the license key of my DC Acrobat to another account, I created this morning.

  Thank you

  Did you buy the version perpetual license or subscription? For the latter, what described you should be enough. For the first, you also have to disable everything first, via the Help menu.

• How to lock the table rows selected adf for another user

  Hi all
  
  In my case, I created a vo based on eo. where I create an attribute (marked) transitional type boolean.
  
  I have created two jsf pages
  
  1 - summary.jsf
  2 - claimed.jsf
  
  in the two page, I slipped even vo as the adf table.
  
  in the page summary, all vo lines is display. and I created a button on the summary.jsf page.
  
  When I have selected a few record table adf (using the check box marked attribute) and click the cliam then
  
  apply filter adf table see criteria and open claimed.jsf page. claimed. JSF page only display selected fine line.
  
  but I want that these selected lines (which is displayed on the claimed.jsf page) don't display another user in the summary.jsf page.
  
  I want to say that these specific lines will be locked so the other user does not work on these lines.
  
  Concerning
  
  Manish

  You would have to:

  (1) add a column in the underlying table of the DB to track lines are claimed
  (2) change your VO to include a where clause clause that excludes claimed elements
  (3) add something in your UI to release the goods in question (if necessary) so that you can release an item if someone closes their browser.

  John

• How to connect to another user without password account, with the administrator account in Vista?

  My son will connect to FB, then goes to bed and does not sign off the coast. I log in and the machine is really slow. I am administrator in Windows Vista. Can I disconnect it without password?

  
  * original title - how I as an administrator can connect my son, another user of my computer. I can get her password, but is it a switch, so I can just cut him so my machine is not so slow? *

  Hello

  Unfortunately, we are unable to disconnect another user without password account.

  However, you can restart the computer that would disconnect the other accounts.

• I have vista and how to record a program to a usb port to another user who has xp to use the program

  I have a samsung program for my phone, I installed and I have vista, I want to know how to record the program on a USB for another user may install and use the program, because they have a netbook with no cd it must be saved to the usb, but the other user has xp so please can you me how to record the program on usb

  Hello

  You cannot save a program that is installed on a USB key or any other

  Once installed a program spreads during the operating system at various locations

  You must download it again and save it on a USB flash drive, then transfer it to their netbook via a USB flash drive

  or get them to download it themselves directly to their netbook so they are available on the net

  For more information on the program, contact samsung

  http://www.Samsung.com/us/support/contact

• After switching to Firefox I screen questioned on public networks. I think that I have granted access. How can I change this?

  Running Windows 7. Past from Internet Explorer to Firefox. A message screen came the next time I used Firefox questions on public networks. I think that I granted access to public networks, and I don't want that. How to change that?

  This sounds like a problem of Windows Firewall. To change this back it is possible to access this setting of the firewall.

  • Configure the firewall if Firefox can access Internet

• I just bought the full package CC, so how do I access it? IM using Mac?

  I just bought the full package CC, so how do I access it? IM using Mac?

  http://www.Adobe.com/products/creativecloud/FAQ.html

  http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

  http://forums.Adobe.com/community/download_install_setup/creative_cloud_faq

  What is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  To start https://helpx.adobe.com/creative-cloud.html the Cloud

  -Installation, update or uninstall and launching after installation