How to have two signatures on a document

Similar Questions

• How to have two copies of the same program to install on WIndows 7 and on the desktop

  «"" "Dear help forum:»»"»

  I am new to WIndows 7, but just have not found the right research
  How to get my answer from Microsoft/Windows 7 basic knowledge.

  I have two programs. There are two versions of the same program
  ('LACE') One is the version 4.0.1, and the other is Version 4.0.6.

  I wish I had one old continue to run (using a purchased
  Product key which I own and have for years).

  BUT there is a problem. The old and new programs are the
  same 'setup.exe '? Download 124 MB each. There are small but
  many corrections and changes in the new program, I am told, but
  they do not have add up to change the size in MB of the program.

  SO I'm in trouble when I'm trying to download the program, as
  It seems to be in WIndows 7, a small program that removes the
  size of the incoming download and informed me that I can not download
  a new that I have already one of this program is installed in the
  computer!

  He asks me if I want to "Uninstall" the previous version and then replace
  It is with a new one. I can't cancel the old version because she had a
  Product key that was told to me in the instructions that he could
  only be used 'once', to uninstall the program won't help
  me as I won't be able to continue to use this program once again, as the
  registration code could only be used once.

  I have a purchased code new, different program version 4.0.6.

  Is this a problem with WIndows 7? I already called/sent the
  company and they have no help and no solution for how these two programs
  are to run on the same computer at the same time.

  Can you please help me and provide instructions on how I load
  This program of "LACE" most recent second size 124 MB and even download
  name in the computer (replacing the automated duplicate program
  prevention installer routine), so I can have and use two copies of
  This program on the computer at the same time?

  During the creation of this issue, I had an idea of what will happen if I created a
  second Downloaded Programs folder to contain the program setup.exe inside
  and try the operation or the opening of this place. He did not like
  the program checked the computer for the first copies of the
  LACE and identified, he was always present in the computer and asked
  Once again if I wanted to remove it.

  Thank you very much!

  If this program is not designed for the execution of the two copies on a single installation of Windows, then you simply can't do.  No ifs, ANDS or goals.  You have never been able to do with any version of Windows, and apparently the creators of this program thinks there is no reason to do so, then you'll just have to choose one version or another.  I'm not familiar with the lace, but more recent versions programs usually include most of the older features while adding the most recent.  They sometimes make us learn new ways of doing things that make us less happy, but I'm afraid that's life in the world of computing.

  That said, I must mention that there may be alternatives that you might continue even if they are less obvious than what you suggested.  If you have the professional version or full edition of Windows, you can get XP mode free you can start Windows 7.  It normally happens in 15 to 30 seconds and you could install and run another version of your program under that.  If you do not either of these versions, you can invest in the Anytime Upgrade and do it available.  Upgrade Home Premium to professional is $ 90.

  The other alternative would be a dual-boot configuration where you could have two versions of Windows in separate partitions, so when you start your computer, you can select the one with the version of your program you want.  I think that the choice of the XP mode would be preferable because it would be so much easier to use, but these two options are available, if you want to continue.

  Good luck.

• How to have two docs tiled horizontally in the fabric of 9?

  FM9, whenever I do window > mosaic he always puts the documents in vertical slabs.  In my previous version of 7, I could choose between vertical or horizontal.  What happened to horizontal tile in FM9?  Is it possible to activate it?

  the only thing I can understand is to have two windows and resize them manually to they are tiled (sort of) horizontally.

  Adobe FrameMaker a lot more tiling options today (according to the number of open documents). Please see the 'Rearrange the Documents' button on the title bar for options. I am also well attching a picture of the options available.

  

  Kind regards

  Rene beauclair

• How to have two Interactive reports on the same page.

  Hello
  I have a requirement where I need to have two interactive reports in a page where the user can select lines in the two reports by a line selector & send the page to the transformation.
  
  Please let me know is direct or workaround for this problem at the APEX 3.1.
  
  Thanks in advance.

  Hello

  Apex do not support having more than one IR on the page.
  See this post for circumvention of blob Roels
  http://roelhartman.blogspot.com/2009/03/two-interactive-reports-on-one-page.html

  Kind regards
  Jari

• Why I have two versions of a document folder in Word in the way that I take?

  If I go via libraries > Documents > word I get a folder containing all the documents expected.

  If I go via libraries > Documents > My Documents > Word the same folder contains only a single document.

  (I'm on Win7 64 bit)

  Windows 7 organizes files and folders a little differently than Windows XP.  In particular, a Windows 7 library is a consolidated view files related in one place.  If you look at your document library, you will see that there is a line that says something like: "Includes X locations," where the X is probably 2, but could be of 3 or more.

  

  If you click this link, you will see something like this:

  

  In your case, you seem to have created two folders named Word.  Know where the records are located is made even more difficult because in Windows 7, the folder that is displayed as "My Documents" is actually named "Documents" - at least the default folder of the same name that is automatically created by Windows.  The screenshot above shows the same behavior with regard to the "My pictures" folder

  I suggest do you the folder that has now all documents in your "Default save location" (you can do a right click on it in the window above).  Place the single document of the other "Word" file in your "save default location", and then delete this file.

• How can add their signature to a document?

  We usually ship to customers, directors, etc. for the signature through their unique email address... no problem.

  However, some documents also require the signature of a witness. How to fulfil this obligation through eSign Adobe Document Cloud services?

  Do customers need to designate a witness first (i.e. give us the witness scheduled address) so we can include the address of the witness when we prepare a document for the signature? So as soon as the customer signs, the document is then sent to the witness to sign and verify?

  I was looking at another secure called product which allows a signer to invite a witness of his choice in order to verify the signature document:

  http://Player.Vimeo.com/video/114937340

  http://Player.Vimeo.com/video/114937341

  Is there a way to do something similar through eSign Adobe Document Cloud services?

  
  

  Thanks in advance
  

  In the case where you do not know the email of the witness, you can repeat the original signer's email address. When they arrive at the enamel sign after placing their first signature, the signer may then delegate their signature to the e-mail address of a witness of their choice.

• How to clear a signature to a document scanned?

  I changed the document to clearscan and can change the other elements of the document, but I need to replace a signature. When I try to remove it, a box pops up that says it is unrenderable text and I have no idea what it is. It does not even show a text around the signature box. Help, please!

  Thank you!

  Tools - Protection - mark for the redaction. Hold CTRL to allow free-form

  creation of the area of redaction.

• How I have two tabs open at the same time

  I want to work on both windows at the same time, in order to drag a symbol from one to the other

  Perhaps there is an add-on to view side-by-side tabs in the same window? Certainly, it is not built in.

  You can open pages in two separate windows and resize the windows so that they appear side by side.

  Let's say you have a window with two tabs open. If you restore the window if it is not expanded (you can see some Office behind it), then you can drag a tab from the window and drop it on the screen area to give it its own window.

  As far as I know, there isn't a way to place these side-by-side windows automatically, but you can use all the usual methods of resizing windows with the mouse to set up.

• How to have two tabs at the same time on the screen... like split in the half

  My daughter once divided the screen into two tabs by dragging, I forgot just how she did... need help

  Breaking of Windows,

  http://Windows.Microsoft.com/en-us/Windows7/products/features/snap

  http://Windows.Microsoft.com/en-us/Windows7/arrange-Windows-side-by-side-on-the-desktop-using-snap

  You can also click with the right button on your taskbar and click on next.

• JSF Validation - how to have two < af:inputText > table with auto-submit?

  Guys and girls,
  
  Have a different challenge, question, problem, brain validation JSF bender. It is similar to the validation of the model in a previous post of mine: Re: JSF Validation challenges - workspace included using the HR schema
  
  I have a table full of < af:inputText > elements. Two of the elements are set to auto-submit, and they are both mandatory (PartNumber & TaxCode). They update both < af:inputText > only reading titled PartPrice & PartTax, respectively, via the entity model. When I click on the line, I get validation error jump - rises due to the auto-submit. _How can I get validation to fire only when I click on the "Submit" button that is running #{bindings.commit.execute}? __
  
  Because of the auto-submit to both, I have to disable any validation and rely on the database to refuse to accept the ' null ' values.
  
  Any ideas? With the help of JDev 11.1.2.1.0.
  
  Will be

  Have you tried setting immediate = "true" or in the pageDef SkipValidation = "true"?

• How to have 2 copies of documents on the same screen in Vista

  How to have 2 copies of the documents on the same screen in Vista?  I am trying to clean up the documents folder and want to drag folders of one over the other.  I'm used to be able to do under Win XP.  Did not understand how to do it under Vista.  Have to continue to go back is a pain in the pututie.  TNX in advance for your help.

  Open the #1 file... Then, open the file #2... Right-click on an open bar space tasks... click on see the windows side by side.

• I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list.

  I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list. MBP OS 10.11.4

  Open the "sent" folder on the account that you mailed to and look at the message that you sent it to see.

  You have email of the accident to a group? You have a group created in the application of Contact with these names? Or maybe that you click on reply to all to create the message?

• How can I create a second digital signature related to my alternate email?  I want to have two digital signatures with passwords.

  How can I create a second digital signature related to my alternate email?  I want to have two digital signatures with passwords.

  I think you mean digital certificate to sign (digital ID). You can create as many of them as you want. Simply select "New ID" in the field "sign in" in the dialog box "sign.

• I have two docs pdf I used Acrobat to convert word documents.  How can I extract a single page of a doc to be inserted into the other doc?

  I have two docs pdf that I converted into Word using Acrobat Pro documents.  How to extract a single page of the first RFSO and insert it into the second doc?  When I "select all" he seized the entire document.  I need to take pages, other pages and change some of the text.

  HI djlarp,

  Try to triple - click the text you want to select - it can sometimes be difficult to select text in a document converted. If this does not work, it could be that the PDF document is created from a scanned document and OCR is not enabled when you converted the document. (However, OCR is activated by default when converting via ExportPDF site.)

  If you are unable to select text by triple-click, let us know. I'd be happy to look more closely at your files.

  Best,

  Sara

• How to have a media player and a document word on the screen at the same time?

  Original title: in a document.

  How to have a media player and a document word on the screen at the same time?  I opened an e-mail with a note of saved file and I type in a document.

  Hi Carol OB,.

  According to the description, it seems that you want to use document Word and Media Player at the same time. I'll be happy to help you in this problem.

  I suggest you to consult and follow the steps from the link that can help you in the use of both applications at the same time and check if it helps.

  Take an application: use two applications at the same time

  http://Windows.Microsoft.com/en-us/Windows-8/snap-apps#1TC=T1

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.