JSF Validation - how to have two < af:inputText > table with auto-submit?

Similar Questions

• How to have two signatures on a document

  Does anyone know how to have two separate signatories sign the document you send for signature?  Do you need to have two email addresses to allow two different signatories?  What happens if the signatories share the same email address.

  Hello

  Yes, I'm sure you must have separate emails, because it is used to route the document.

  I've tried a few, but have always used different addresses.

  You can specify where the different signatories will sign and what information they must provide (initials, title company, etc.) using designated codes. I hope that you have the guide for this, quite powerful and flexible stuff!

  ESign online or simply use the template designer in the control panel...

  OleM, Tieto, Norway

• Have two old CD/DVD with the old movies of family 8mm on them.  When I try toopen them I get a statement that ' cannot they in format Samsung "suggestions?

  Have two old CD/DVD with the old movies of family 8mm on them.  When I try toopen them I get a statement that ' cannot they in format Samsung "suggestions?

  that is a difficult question. Try VLC to see if it will open to them. Usually when the disc appears on the desktop, if you click on it and let go, then press the clover sheet and I (get info command), you should be able to choose which application/program can open them. I have not already heard talk of the "samsung" format, I know there is a stranger there (lie format MTS from Sony). Regarding the conversion of them, maybe MPEG streamclip or hand brake? worst case scenario, you may need to spend some money to buy a video conversion app/program

  Sorry I can't help you more

  JB

• I have two portable hard drives with music and video files and cannot get them to play

  I have two portable hard drives with music and movies files can get them to play my laptop girlfriend see them, but does not play

  If you copy the files on the portable hard drive will they play?

• How to join this per_rating_levels this table with query table.

  Dear all,
  
  Guide how 2 join me per_rating_levels this table with query because, I want 2 see the per_rating_levels.name against all employees.
  When I join this table with query it shows several recording/cortion against this record.
  
  Query:
  
  SELECT
  PAPF.full_name employee_name,
  papf1.full_name supervisor_name,
  WOMEN'S WEAR. Employee_number,
  
  hr_general.decode_job (PAAF.job_id) job_name,
  Department of hr_general.decode_organization (PAAF.organization_id),
  PC.Name, PCE.Comments EmployeeComments,
  (by selecting pce1.comments in per_competence_elements pce1
  where
  PCE.assessment_id = pce1.assessment_id
  AND pce.competence_id = pce1.competence_id
  AND pce1.object_id = pce.object_id) ManagerComments;
  
  --(sélectionnez rtl.name dans rtl où les pc.) RATING_SCALE_ID = rtl. Name RATING_SCALE_ID)
  
  
  OF per_all_people_f women's wear.
  per_all_people_f papf1,
  per_all_assignments_f ADP,
  PA per_appraisals,
  pat per_appraisal_templates,
  per_assessments not,
  per_competence_elements pce,
  per_competences pc
  
  
  WHERE papf.person_id = paaf.person_id
  AND paaf.supervisor_id = papf1.person_id
  AND paaf.primary_flag = 'Y '.
  AND pa.appraisee_person_id = papf.person_id
  AND pa.appraisal_template_id = pat.appraisal_template_id
  AND pa.appraisal_id = pas.appraisal_id
  AND pat.assessment_type_id = pas.assessment_type_id
  AND pas.assessment_id = pce.assessment_id
  AND pce.object_id = papf.person_id
  AND pce.competence_id = pc.competence_id
  AND trunc (sysdate) BETWEEN papf.effective_start_date AND papf.effective_end_date
  AND trunc (sysdate) BETWEEN papf1.effective_start_date AND papf1.effective_end_date
  AND trunc (sysdate) BETWEEN paaf.effective_start_date AND paaf.effective_end_date
  
  - AND papf.employee_number =: p_employee_number
  - AND pa.appraisal_date =: p_appraisal_date
  - AND papf.business_group_id =: p_bg_id
  
  order of papf.employee_number
  
  
  Concerning

  user10941925 wrote:
  Dear all,

  Guide how 2 join me per_rating_levels this table with query because, I want 2 see the per_rating_levels.name against all employees.
  When I join this table with query it shows several recording/cortion against this record.

  '2' in your question means "to"? If so please do not use text instant message in this forum.

  Now I suppose that PRE_RATING_LEVELS is a table in your application. And you are trying to include this table in an existing query. But in doing so, you have found the Cartesian product, correct?

  In fact, how do you think someone a public forum without any knowledge of your table and data structure could help you?

  Lets see, here's your query. I formatted.

  
  select papf.full_name                                       employee_name
       , papf1.full_name                                      supervisor_name
       , papf.employee_number                                 employee_number
       , hr_general.decode_job(paaf.job_id)                   job_name
       , hr_general.decode_organization(paaf.organization_id) department
       , pc.name                                              name
       , pce.comments                                         employeecomments
       , (
            select pce1.comments
              from per_competence_elements pce1
             where pce.assessment_id = pce1.assessment_id
               and pce.competence_id = pce1.competence_id
               and pce1.object_id = pce.object_id
         )                                                    managercomments
    from per_all_people_f        papf
       , per_all_people_f        papf1
       , per_all_assignments_f   paaf
       , per_appraisals          pa
       , per_appraisal_templates pat
       , per_assessments         pas
       , per_competence_elements pce
       , per_competences         pc
   where papf.person_id           = paaf.person_id
     and paaf.supervisor_id       = papf1.person_id
     and paaf.primary_flag        = 'Y'
     and pa.appraisee_person_id   = papf.person_id
     and pa.appraisal_template_id = pat.appraisal_template_id
     and pa.appraisal_id          = pas.appraisal_id
     and pat.assessment_type_id   = pas.assessment_type_id
     and pas.assessment_id        = pce.assessment_id
     and pce.object_id            = papf.person_id
     and pce.competence_id        = pc.competence_id
     and trunc(sysdate) between papf.effective_start_date  and papf.effective_end_date
     and trunc(sysdate) between papf1.effective_start_date and papf1.effective_end_date
     and trunc(sysdate) between paaf.effective_start_date  and paaf.effective_end_date
  order
      by papf.employee_number 
  

  Now, you want to add the PRE_RATING_LEVELS in the list so that you can use the column NAME.

  First thing you need to do is to determine the relationship between PRE_RATING_LEVELS and other tables. A relationship can be

  1. one on one
  2 one-to-many
  3. - to-several

  So when you tried to join, your state of health has resulted in 2nd or 3rd type of relationship. If you arrive with someone who knows the business and the data and find the table that could uniquely identify a line of PRE_RATING_LEVELS.

• How to have two copies of the same program to install on WIndows 7 and on the desktop

  «"" "Dear help forum:»»"»

  I am new to WIndows 7, but just have not found the right research
  How to get my answer from Microsoft/Windows 7 basic knowledge.

  I have two programs. There are two versions of the same program
  ('LACE') One is the version 4.0.1, and the other is Version 4.0.6.

  I wish I had one old continue to run (using a purchased
  Product key which I own and have for years).

  BUT there is a problem. The old and new programs are the
  same 'setup.exe '? Download 124 MB each. There are small but
  many corrections and changes in the new program, I am told, but
  they do not have add up to change the size in MB of the program.

  SO I'm in trouble when I'm trying to download the program, as
  It seems to be in WIndows 7, a small program that removes the
  size of the incoming download and informed me that I can not download
  a new that I have already one of this program is installed in the
  computer!

  He asks me if I want to "Uninstall" the previous version and then replace
  It is with a new one. I can't cancel the old version because she had a
  Product key that was told to me in the instructions that he could
  only be used 'once', to uninstall the program won't help
  me as I won't be able to continue to use this program once again, as the
  registration code could only be used once.

  I have a purchased code new, different program version 4.0.6.

  Is this a problem with WIndows 7? I already called/sent the
  company and they have no help and no solution for how these two programs
  are to run on the same computer at the same time.

  Can you please help me and provide instructions on how I load
  This program of "LACE" most recent second size 124 MB and even download
  name in the computer (replacing the automated duplicate program
  prevention installer routine), so I can have and use two copies of
  This program on the computer at the same time?

  During the creation of this issue, I had an idea of what will happen if I created a
  second Downloaded Programs folder to contain the program setup.exe inside
  and try the operation or the opening of this place. He did not like
  the program checked the computer for the first copies of the
  LACE and identified, he was always present in the computer and asked
  Once again if I wanted to remove it.

  Thank you very much!

  If this program is not designed for the execution of the two copies on a single installation of Windows, then you simply can't do.  No ifs, ANDS or goals.  You have never been able to do with any version of Windows, and apparently the creators of this program thinks there is no reason to do so, then you'll just have to choose one version or another.  I'm not familiar with the lace, but more recent versions programs usually include most of the older features while adding the most recent.  They sometimes make us learn new ways of doing things that make us less happy, but I'm afraid that's life in the world of computing.

  That said, I must mention that there may be alternatives that you might continue even if they are less obvious than what you suggested.  If you have the professional version or full edition of Windows, you can get XP mode free you can start Windows 7.  It normally happens in 15 to 30 seconds and you could install and run another version of your program under that.  If you do not either of these versions, you can invest in the Anytime Upgrade and do it available.  Upgrade Home Premium to professional is $ 90.

  The other alternative would be a dual-boot configuration where you could have two versions of Windows in separate partitions, so when you start your computer, you can select the one with the version of your program you want.  I think that the choice of the XP mode would be preferable because it would be so much easier to use, but these two options are available, if you want to continue.

  Good luck.

• How to have two docs tiled horizontally in the fabric of 9?

  FM9, whenever I do window > mosaic he always puts the documents in vertical slabs.  In my previous version of 7, I could choose between vertical or horizontal.  What happened to horizontal tile in FM9?  Is it possible to activate it?

  the only thing I can understand is to have two windows and resize them manually to they are tiled (sort of) horizontally.

  Adobe FrameMaker a lot more tiling options today (according to the number of open documents). Please see the 'Rearrange the Documents' button on the title bar for options. I am also well attching a picture of the options available.

  

  Kind regards

  Rene beauclair

• How to have two Interactive reports on the same page.

  Hello
  I have a requirement where I need to have two interactive reports in a page where the user can select lines in the two reports by a line selector & send the page to the transformation.
  
  Please let me know is direct or workaround for this problem at the APEX 3.1.
  
  Thanks in advance.

  Hello

  Apex do not support having more than one IR on the page.
  See this post for circumvention of blob Roels
  http://roelhartman.blogspot.com/2009/03/two-interactive-reports-on-one-page.html

  Kind regards
  Jari

• How to create two different smart albums with photos with the same date?

  I created a smart album by using 'Date is' and ' keyword is EAA.»  (The photos have a keyword like "EAA" or "Flower".  Photos of keyword EAA & flower have the same date.)  When I use "Corresponding to all" are has no pictures in the album.  When I use "Match any" all the photos are in the album - EAA & flower.  I would like an album with only pictures of CEA for that date and another album with photos of flower with the same date.

  I get the same answer.  I can get the date and to a key word to work with 'all' selected, but not date and keywords.  So you will need two smart albums: one with date and ECA ('all' selected) and the other with date and flowers ('all' selected).

  Use the file menu option ➙ new Smart Album.

  

  Report the problem to Apple via https://www.apple.com/feedback/photos.html.

  

• How to have a piece of video with an image with buttons

  Hi all
  
  I'm new to the forum, so I apologize for my lack of right to know from the outset.
  
  I am creating a flash file that plays a video and once finished video you see, instead of the video, a still image with buttons on it. The buttons would be "replay video" or "go to url".
  
  I'm on how import video and create a swf with a skin and a FLV file base. But I can not get my head wrapped around how, once the video reaches the end, have the image, change and display 2 buttons.
  
  If you know some tutorials or know examples, that would hep.
  
  Any help would be greatly appreciated.
  
  Thank you
  Thepopguy

  Oh complex - I think I got this one...

  Click component flv and give it the instance name vid.
  Create your buttons onto the scene in place - give everyone an instance name. Fix them in invisible using actionscript.

  Use this code on the image containing the flv file - not to fix this code for the component. It must BE on THE FRAME, not on the component...

  var vidList: Object = new Object();
  vidList.complete = function() {}
  button1instancename._visible = true;
  button2instancename._visible = true;
  }
  vid.addEventListener ("complete", vidList);
  Stop();

  This will make the buttons visible when the film is over.

• How to copy a record in table with the database Access using VB

  I have a file DBTEST.accdb and table 4 in
  With the help of VS 2013 Express

  In my project VS.

  Form1 have two DataGridView, store and display data of table1 and table2 in DBTEST.accdb
  The column is the same in table1 and table2
  The column is the value yes/no (check box) in DBTEST.accdb

  Now, I would like to determine the weather, the check box is selected.
  Copy the entire line selected in table2 from table1, and then delete from table1.
  And I want that the task is performed by a single button.

  Thank you very much.

  You can visit Microsoft Support Page, click here

• How can I set up a table with a fixed header on parchment?

  I'm trying to implement a table with a fixed header on parchment on my site of Muse. The table must scroll with main site window (not inside a box).

  Here is an example with CSS, HTML and JS code in separate windows.

  Is this achievable in Muse? If so, how can it be done?

  I saw a few threads on similar topics but have not found an answer.

  Thank you.

  Dmitry

  Yes, you can add the table by using the feature to insert the HTML code and it will still work until browsers stop supporting them. But you will not be able to pin, added the header of the table in the order of the Muse.In, to pin header in the Muse, it must be a separate object in the Muse.

  If you need to do requires a significant amount of custom coding, then Dreamweaver is probably a more appropriate tool as Muse does not support direct access to the code.

• How can we achieve a scroll table with scrollPolicy = "page".

  JDEV version 12.1.3.0

  Hi Experts,

  I have a table in a popup and scrollPolicy = "page". I want to delete paging and want instead a roll to the table. So is it possible that I can make

  scrolling of table with scrollPolicy = "page".

  Thank you

  AR

  N ° it would make no sense. The strategy of scrolling to scroll and paging should be gone.

  Timo

• How to export data from the table with the colouring of cells according to value.

  Hi all

  I use jdeveloper 11.1.1.6

  I want to export data from the table with a lot of formatting. as for color cells based on value and so much. How to do this?

  You can find us apache POI-http://poi.apache.org/

  See this http://www.techartifact.com/blogs/2013/08/generate-excel-file-in-oracle-adf-using-apache-poi.html

• How I have two tabs open at the same time

  I want to work on both windows at the same time, in order to drag a symbol from one to the other

  Perhaps there is an add-on to view side-by-side tabs in the same window? Certainly, it is not built in.

  You can open pages in two separate windows and resize the windows so that they appear side by side.

  Let's say you have a window with two tabs open. If you restore the window if it is not expanded (you can see some Office behind it), then you can drag a tab from the window and drop it on the screen area to give it its own window.

  As far as I know, there isn't a way to place these side-by-side windows automatically, but you can use all the usual methods of resizing windows with the mouse to set up.