How to identify my model of laptop for downloads?

Similar Questions

• Satellite M300 - how to identify the model number?

  Hi all

  Someone knows how to identify my model number? On the bottom it says it is PSMD4L-O1E00C model and serial number is 48188716W but when I go to http://gedb.toshiba.com who must tell me the model number for use on the Web site for drivers etc it says - Combo series and model valid, couldn't find it in our database. Please try again

  Ive tried all combinations, in the case of O are zeros or O ideas?

  Its a satellite M300, I bought in Singapore

  Hello

  To be honest, I never saw this Toshiba site
  Normally, the numbers are correct, because I compared it with my laptop.

  However, why you n t download the drivers on the site of Toshiba Asia? Here, I founded your model code, PSMD4L:
  http://www.PC.Toshiba-Asia.com => Services & Support

• How to identify my model Satellite?

  I tried to install win 2000 on my laptop satellite, and everything works well except for the video. I read in some posts that I need to update my bios. I tried this on the Australian site and the file, the file that I downloaded does not work with my laptop, on the back of it says 1800 unit system, but does not specify an exact model. It is said by Satellite on the front.

  How do I know my exact model so I can download the update of the bios right?

  Hello

  I put t know where you bought your laptop, but if you see the Toshiba Australia download page you will find just an entry for Satellite 1800 and BIOS update version 2.20.

• How to: Restore my back of laptop for buying condition, remove Google and all add ons

  Original title: Restore my back of laptop for buying condition, remove Google and all add ons

  Vista
  Inspiron 1525
  Centrino Inside
  Reference Dell
  Laptop
  2008
  Delete all the shortcuts, folders, data of the necessary United Nations
  system restore

  Hello

  As you ask here, you don't have a recovery disk.

  Here's how to access the Dell recovery hard disk partition and put your computer about how you bought.

  ATTENTION: All your data and programs that you have installed will be wiped from the drive hard as you do this. so back up your data. Programs will need to be reinstalled.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  See you soon.

• How to create a model to look for an ftp location loading flat files

  Hello world
  
  My requirement is - I need my model to a ftp location where our files food source are kept and loading every day. Right now my model ODI resembles my odi home default load my files. Can anyone suggest how this is possible. And also how can I customize the loading of flat file in the package (my flat file has a name that has the date of days on that (0628xxx.txt for today and tomorrow 0629xxx.txt).) How can I tell odi to search for files in my parcel today and tomorrow.
  
  Thanks in advance.
  
  concerning
  Badin

  Babu,

  The default port for ftp is 21. What is your port?
  You can specify the name of the port next to the server name as in "servername.company.com:27" assuming that your ftp is running on port 27

  You use local or remote agent. It will also make a difference, because maybe remote agent cannot see this IP.
  Another point to consider is that your ftp could be a secure ftp, in this case, you need to use another tool - odiSFtpGet

  Try using the ftp commands in the command prompt Windows.

  Get the means to get the files from the FTP server.
  Put the means you want to place the files on the FTP server.

• How can I find model number original for a QJ926AAR DV6T refurbished

  About a month ago I bought a laptop HP Pavilion DV6T used.  The unit I bought has a warenty for 90 days at HP.  The web site where I bought the unit it lists as a DV6T - B 6, 00.  However, the HP websites list several variants of the DV6T - b 6, 00.  I would Sanchez to identify the number of model/product original of this system before it has been refurbished.  This is necessary to locate the good BIOS downloads, manuals etc...

  The product into the battery compartment tag lists unity as product number: QJ926AAR.  The card system is 17FC.  The OS is windows 7 Home Premium.  The processor is an Intel core I5.

  I searched the site of HP QJ926 and found nothing.  Can someone provide some guidance on how to track the number of original products?

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5169375&LC=en&cc=CA&DLC=en&task=&lang=en&cc=CA

  I entered the product number, you have here on this page, and he found the above.     QJ926AAR

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?CC=CA&LC=en

  It presents itself as a CTO model, which means "Custom To Order. So y ' will really have anything listed specifically for her.

  However, the letter 'T' in the description is synonymous with Intel processor so the above is the right page. If you want to know more precisely what is material, type in 'Information system' (with on the quotes) in the search box when you click the Start button.

  In addition, if you are still running HP Support Assistant, more details are there.

  What type of problem are you having that you think that you need to update the BIOS?

• How to identify the model number Toshiba Satellite A210

  Hello

  I have a Satellite A210, now, I would buy an extra RAM. On all the Ive visited the site, they ask for a little more information. They ask for a Satellite A210...
  I looked at the sticker on the bottom of the laptop, but that only shows the A210. My model number is PSAFGA-078019. Where can I find what is supposed to come after the 210?

  Thank you

  Hello

  All information must be posted at the bottom of the unit.
  There are a few labels including details such as the model number, serial number, etc.

  But to be honest that the Satellite A210 PSAFGA 078019 is not a European Toshiba model.
  It s possibly an Australian / New Zealand series.

  I googled for the number PSAFGA-078019 and get some information.
  It seems that the laptop is called Satellite A210/801

  However, the laptop should support the same modules as the other units A210 and compatible modules supports these specifications:
  * DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM *.

  See you soon

• ENVY DV7 7243nr: how to identify the slots of ram for my hp Envy DVD 7243nr

  I bought a 4 GB memory module to replace the 2 GB one in my laptop, I can't identify what the 2 GB one.

  The other location contains a module of memory 4GB so this will improve my laptop it's RAM max.

  Hello

  The label of each original memory has a part number, pudes looking for you:

  http://PartSurfer.HP.com/search.aspx

  Although without this label, you can leave only one of the original modules, see the system information in the Control Panel, or run a program that shows you:

  Crucial.com - Crucial System Scanner

  Concerning

• Could you recommend model HP laptop for Linux

  I'll buy a new laptop. The main requirements are

  • Chipset AMD;
  • GPU Radeon HD;
  • operating system is Linux (Kubuntu).

  The purpose of the laptop is a programming and calculations with the help of the GPU (MATLAB, Maple, OpenCL applications). A liilte bit (steam) game.

  Because the filters on a homepage is not very suitable for my needs, I'm a bit confused. Could you recommend me the model?

  Mustitz wrote:

  I'll buy a new laptop. The main requirements are

  • Chipset AMD;
  • GPU Radeon HD;
  • operating system is Linux (Kubuntu).

  The purpose of the laptop is a programming and calculations with the help of the GPU (MATLAB, Maple, OpenCL applications). A liilte bit (steam) game.

  Because the filters on a homepage is not very suitable for my needs, I'm a bit confused. Could you recommend me the model?

  You should contact HP sales and support they have some portable Linux and that they would be more useful to see if it meets these needs.

• How to update the model of RDS for Windows Server 2012 collection?

  Hi team,

  I want to know how to update the collection of RDS model (model master sysprep) which is used to create the collection?

  I tried the below way but did not get the update of the collection of virtual machines.

  -Start the image of mater of sysprep

  -install the required components

  -resysprep the image and stop it

  -East went to the RDS Collection and added new virtual machines in collection (removed the old his)

  Once created, I opened a session in the machines, but I don't see the updates (I installed some software in the sysprep image however and no is not there in the virtual machines in the pool)

  Can someone let me know if I need to create a whole collection again or the way I do it is a proper way? If it's a good way what could be the reason why I get the new installed software model sysprep image in virtual machines created in the pool, based on the model?

  How do we actually updated for security and other regular patches updated in virtual machines? In my view, we use the same approach?

  Any suggestions will be appreciated.

  Kind regards

  original title: Windows Server 2012 RDS - model Sysprep update process and collection of creation

  Hi MS Expert 2010,

   

   

  I wish that you post your question in the TechNet Forums as it is addressed to an audience of it professionals.

   

  Check out the link-

   

   

  TechNet Forums

   

  Hope this helps!

   

• Need to identify the model no laptop Pavilion G6

  No standard information on the case label.  Label seems to be hybrid Windows Key code also including HP codes, but no code is identified (IE without s/n, p/n prefix).

  Probably included product codes are:

  584037 001

  X 16-96072

  However, none of these codes are accepted on the HP web site.

  Can anyone help identify the correct HP product/model code?

  Hello

  Can be useful to check the alternative label tags displayed in the sub-heading "Show samples of the additional label" on the page here.

  Kind regards

  DP - K

• How to identify the model of the device programmatically?

  Hello

  is it possible that I can recognize a model programmatically? I know that there is DeviceInfo class and for example something like ProductID - but it's different for each model.

  I'm looking for something that will allow me to recognize him as a model of the device is for example 8800 or 8300.

  can I do it somehow?

  DeviceInfo.getDeviceName ();

• How do we install models of discourse for the CC organization analysis?

  I downloaded the English speech analysis model International here:

  http://www.Adobe.com/UK/products/premiere/extend.displayTab3.html

  Who says they are for CC as well as CS6.

  But when I install it, I don't get the option in CC to analyze clips using nothing more than American English.

  The templates are installed here:
  C:\Program Files (x 86) \Common Files\Adobe\SpeechAnalysisModels\CS6 so I tried to create a model CC, copy the contents of CS6 everywhere, then by restarting first. No joy. What else can I try?

  See you soon

  Mark

  put all content--> C:\Program Files (x 86) \Common Files\Adobe\SpeechAnalysisModels\CS6

  in--> C:\Program Files (x 86) \Common Files\Adobe\SpeechAnalysisModels\4.0

  that all.

• How to print from my HP laptop for my Canon Wireless printer?

  I have a Canon MX410 Wireless printer is currently connected to my HP desktop computer through a USB port.  I would also like to add this printer to my laptop but it can not know!  I tried the Office of the instillation of the printer, but it did not work.

  Most wireless printers turn off wireless when the printer is connected by USB.

  I could not actually find a statement to that effect in the Canon documentation I've come briefly, but I suspect that is what is happening.  Unplug the USB cable and see if you can now get the printer works wirelessly with the laptop.

  If it works, re - configure the installation on your desktop to access the printer through a "Standard TCP/IP Port". It may be easier to simply uninstall the printer on the desktop and reinstall it by selecting "print via network" or whatever the Canon calls it during the installation process.

• How to identify a webworks app launches for the first time...

  I am designing my webworks app to prompt the user to accept a license agreement before using the application for the first time. If they accept that the application works as usual, if they decline the application does not load and it ends.

  Is to do it in a Webworks app without the use of a store like the SD card anyway?

  I don't want to use the SD card as a store because it limits the number of users who can use the app (even if these SD cards are now pretty much standard).

  Does anyone have any suggestions?

  EC

  You can store the information using the API file on the local file system IO... You don't need to use the SD card... just a local path on the file system of the device.