How to implement a direct communication between the two boards of singleRio using Ethernet?

Similar Questions

• How to remove a black line between the two parts of the scanned image?

  Hello

  I scanned a drawing I did a long time ago.

  But given that the paper is too large for the scanner, I had to do two scanning. I wanted to join these two parts as in Photoshop.

  I loaded the left side of the drawing.

  I changed the size of the canva so the second part could be put there.

  I loaded the part right of the drawing and copied and paste it on the canva of the left side of the drawing.

  But whatever I do, I can see a vertical black line where the left and right hand reach. On the contrary, where the right side starts, it seems.

  Could someone tell me (or direct me to a tutorial that tells about) what to do in this case?

  Thanks in advance for your answers.

  This isn't under file, Scripts, but under file, PLC.

• How to put a line break between the two strings?

  I'm putting a couple of line between strMessage2 and strMessage3 breaks in the automatic email button in the following document.  What Miss me?  Thank you!

  https://Acrobat.com/#d=hSatmYfM4gqdX1cb-XRVMg

  Win 7, LC 9.0 ES2

  Make sure that you use \n and not/n.

• Lack of communication between the host computers

  Hello

  We have a small installation demo (2 x ESXi5.1 build 799733 hosts) of vCloud Director 5.1.1868405 running build and meet a strange communication with the VMS problem when they sit on different hosts.

  That we have tested with several organizations and different types of OS etc and the behavior is the same, an example would be that if one of the VMS is a Web server of the site can be displayed if from VMs on the same host, however when you separate guests cannot view the Web site. Virtual machines can ping each other wherever they are.

  I hope someone here can help point me in the right direction to solve this

  Thank you

  Marc

  Looks like your pool of network is down.  If you are using a paralytic, routed Org or Org... isolated network looks that transport between the two does not work.

  If virtual machines are on one of these network types and on the same host, it works.  If they are on different hosts, it fails.

  Is what kind of network pool?  VCNI, VXLAN etc.?

  Make sure that the physical network is actually configured to transport data.  for example, VCNI uses a VLAN and MTU to 1524 (suggested min) for transportation between the hosts.  However, you need to configure it on the fabric of network (switch, etc.).

  VXLAN has its own requirements, but it has a way to test the virtual wire.

• No communication between the primary and standby

  Hello
  
  I have configured the DG,
  
  primary-> testprod
  standby mode-> testprod_s
  I started, standby machine instance watch with testprod and its place...
  but there is no communication between the primary and standby...
  
  How can I ask/check communication?

  Heartbeat PING [ARC3]: Unable to connect to the day before "testprod_s". Error is 12514

  eve of post form

  status of $lsnrctl
  $lsnrctl services

  When oracle not registered with listener service, this kind of errors occurred.
  The value of register LOCAL_LISTENER & manually as below in sleep mode and post

  SQL > alter the registry system;

• No communication between the Bluetooth SD - BT2 and PocketPC SD card

  I use an SD - BT2 (PA3271U) card in a Microsoft Pocket PC (also referred to as 'Microsoft PocketPC 2003') 4.20.00. I use the latest driver Toshiba 5.01 C and the card is recognized by the Pocket PC (Medion MD 95450 / MDPPC 150). I can connect to my mobile phone and GPRS connection is accumulation with no problems.

  But later at this point in time, the connection is established but dead... no connection to anyone. It seems that the communication between the Pocket PC and the card SD - BT2 is broken on the software side.

  Anyone have an idea (or a working driver) for this problem?

  Thanks in advance

  Karl

  Hello

  Have you tried to reinstall the drivers or software for SD - BT2?
  In my opinion, you should check this option.
  Also, I found a brand new version for PDA Bluetooth Stack (Bluetooth software and drivers).
  Check out this site.
  http://APS.toshiba-tro.de/Bluetooth/pages/download.php.

  Good bye

• No communication between the printer and the Red computer on switch flashing printer does on every time I turn it off

  I get a message there is no communication between the printer and the computer. Printer is all-in-one HP Officejet 4315v. Have uninstalled and reinstall the software and unplug the USB port and plug it back. Repeated several times. Still no communication. Exclamation red light next to 'on' and green button 'on' butter is flashing all the time.

  You have a hardware failure of the printer.  Contact the manufacturer for support.

• Encrypted L3 Communications between the TOWER and WLC?

  Hi all

  I work with a client who wants to put the towers away to their WLC (a 4402). The problem is that communications between the TOWER and WLC must be secured, even through their private Wan! I have a few questions that result, if someone is able to help you;

  1. I can't know if and what method of encryption is (is it AES etc.?) used on connections between towers and the WLC and what are the steps?
     1. The terminology can be a problem here, it's not a wireless mesh, just classic LAP for WLC
  2. EXTENSIVE customer network is already encrypted (IPSec VPN via VPLS) in parts - what is the consequence of execution of AP<-->WLC with end to end (if possible) on a network encryption EXTENDED with IPSec, i.e. double encryption?

  Strange but true - pointers will be greatly appreciated... Phil.C

  With a controller of the 4400 series, the control traffic between the AP and the regulator is already encrypted AES.  The user traffic is not encrypted.  If you use a 5508 controller all traffic between the AP and the controller is encrypted AES.

  For what is running the traffic through a VPN, it should work.  The issue I see with this is with the MTU in general.  The controller will drop all packets with a payload of less than 32bytes data.  According to the MTU over the VPN I've seen packets getting fragmented and it is a question.  If you use one of the versions CAPWAP (5.2 or newer) discovery dynamic MTU is part of the Protocol and this MTU problem does not really exist.

• How to count the number of Sundays between the two dates

  Hello
  
  I want the number of Sundays between the two dates
  
  example of
  
  number of number of Sundays between 4 January 2013 ' and April 30, 2013 "in a select query, I have to include this as a sub query in my select statement.

  nordine B wrote:
  Hi Frank,.
  Have 1 doubt...

  In many countries the week could me "Monday". How the application handles it?
  Or did I get something wrong?

  Help, please!

  For ' IW'(ISO week) early in the day is always Monday...

  It's so simple - calculate the weeks between two dates based on Monday... This is the number of Sundays...

  NEXT_DAY is another option...

  SQL> with dd as
    2  (
    3      select TO_DATE('01-04-2013','dd-mm-yyyy') fdt, TO_DATE('30-04-2013','dd-mm-yyyy') ldt from dual
    4  )
    5  SELECT       fdt,ldt,
    6            (next_day(ldt,'sunday')-next_day(fdt-1,'sunday'))/7 sdays
    7  FROM         dd;
  
  FDT       LDT            SDAYS
  --------- --------- ----------
  01-APR-13 30-APR-13          4
  

  Published by: JAC on May 2, 2013 12:20

• Disable communication between the host and the virtual machine

  I have VM Server 2.0 and one of the virtual machines has the same name as the server and even if the virtual computer is connected to the host only network it generates the Windows error message: duplicate names exist on the network.

  is there a way to disable communication between the host and the virtual machines? I just need a virtual network that is isolated from my network complete and host also.

  Thank you.

  The GUI Server2 is not to choose the other unused vmnets.  Then edit your file VMX use a different vmnet of 0, 1 or 8.  (which are bridged, host-only and NAT)

  Thus, for example, if your VMX has a line that says:

  Ethernet0.VNET = "VMNet0.

  change to:

  Ethernet0.VNET = "VMNet2.

  (This assumes that you have not used the network Editor to fill the vmnet2 either).

• How to specify the spacing between the two components

  Can specify us the distance between two points on a form? If so, please let us know how?
  
  Published by: user1670125 on July 14, 2010 05:37

  Hello user1670125 (please tell us your name).

  It depends on if you mean vertical (distance between the items on separate lines) or horizontal (distance between the items on the same line).

  A method I use for opening a vertical space between two elements is:

  -establish a single display without label
  -Name it "P #_BLANK ' or ' P #_BLANKn ' (if there is more than one page)
  -give a sequence so that it renders between the two points
  -do not escape special characters
  -give a source value of "< br / > < br / > < br / >" (according to the number of blank lines you need)

  A method I use for opening space horizontally between two elements (assumption here, is that you have defined the second element to not display on a new line and have adjusted the scope of column on other points in the same region to bring together the two fields as needed) - simply specify "& nbsp;" & nbsp; & nbsp; "in the first element display text of item (according to the number of spaces you need to).

  Hope this helps,
  John

• Can anyone tell how to insert a string between the two another string...?

  Can anyone tell how to insert a string between the two another string...?
  For example: String1 = 'ABC '.
  String2 = "XY".
  
  I want that the chain of output like "AXYBC".

  If you have the Position where you want to place your chain, this might work:

  SQL> r
    1  declare
    2    vStr1 varchar2(20) := '123456789';
    3    vStr2 varchar2(20) := 'aa';
    4    nInsertPos number := 3;
    5    vResult varchar2(20);
    6  begin
    7    vResult := substr(vStr1, 0, nInsertPos) || vStr2 || substr(vStr1, nInsertPos+1);
    8    dbms_output.put_line(vResult);
    9* end;
  123aa456789
  

  If you want to insert it after a special character, you can search for the position of your character with the help of instr

  concerning

• I can't stop finite samples daqmx read between the two?

  Hi all

  I want to read data from 10 seconds to a trigger is received. for this im using daqmx task finished sample mode and read the data on the trigger getting. It works fine but I can't stop my vi between the two when its reading of the data. I have to wait for it to complete the reading of values, and then stop the vi.

  so I switched to continuous sampling mode that allowed me to stop the vi whenever I want.

  I just want to know is there any means or the property using which I can stop my task over daqmx read when I want?

  I guess you call DAQmx Read with extraordinary value (-1) for samples of #.  It is also the default if left thread continues.  In a finished sample task, it means to wait until the memory full buffer has been filled with samples before returning.  Once you make that call, you cannot directly finish soon.  You're stuck waiting for buffer fill or for the timeout expires (default 10 seconds).

  One way to avoid getting stuck is not to ask for samples that do not exist already.  You can query a DAQmx Read property, known as the "Samples available" or something like that and son of this result in a call to DAQmx Read.  Such a call will return immediately whatever data are currently available.  Subsequent calls will give you samples.

  -Kevin P

• I want to know the differences between the conditions of subscription and use of Photoshop for photographers of the usual subscription?

  Nice day! I want to know the differences between the conditions of subscription and use of Photoshop for photographers of the usual subscription? And if I can buy then and for how Adobe Illustrator? What will be the beta of the Adobe XD for Windows? Thank you!

  If you ask what is the difference between photographic subscription and the subscription of stand-alone application, then the answer is both are essentially the same except for two ways. The photographic edition comes with Adobe Lightroom and 2 GB of cloud storage. The stand-alone Photoshop version comes on its own, but with 20 GB of cloud storage and is two times more expensive. If the 18 GB of cloud storage is an additional value, I would say probably no - put the money that you save on an external hard drive in place. The photographic edition was initially a temporary special offer caused a suggestion from one of the co-creators of Photoshop, but turned out to be very popular with fans, private and business and so we have a permanent plan to subscribe to Photoshop. There is no plan equivalent to Illustrator and who is available at a single price. With the subscription model, you can cancel at any time, but the contract is 1 year, if you cancel at the beginning there is a penalty clause which will ask you to pay extra this tax applies only if you pay your monthly subscription every year.

  You don't say where in the world you are, but the link below shows the available plans. There is a drop down box that allows the conversion in different currencies.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  Hope that helps.

  Terri

• The merger between the two images with the control points? Novice request

  Hi all

  I've seen a tutorial that describes exactly what I want to achieve, but can't for the life of me remember of it called or how to do it.

  Basically, I have two images of the map I want to put in a short film. During the transition between the images, instead of simply melted into a single image I want that they "sink" in the following image.

  The tutorial I've seen used Premiere Pro and "checkpoints" that match between the two images showing where things moved too.

  I am barking the wrong tree? I will reply cheerfully questions in an attempt to better describe this. I apologize for the vagueness of the topic.

  Tom

  For a quick and dirty overview using the track Matte Keying, see this glance for this purpose: https://vimeo.com/user17132571/review/69330020/8f4fc79c86

  Hunt